The 9 Best 1 Lathe Chucks (2023 reviews)

The Excelsior mini lathe chuck system is an easy to use, high-performance, full accessorized key operated self centering four-jaw lathe chuck system. It will hold square stock for drilling out the pen tube. The chuck threads are 1" 8 and will fit onto the spindle of an Excelsior mini lathe. It comes with the set to make up for any flaws in the finish.

The psi csc3000c does not have a dust cover on the back. It's perfectly balanced with no run out, holds the work tightly, and the various jaws allow about anything to be chucked. The spindle thread adapter is replaceable, so you can change your lathe and still keep the chuck.

Why We Like This:

Jaws are sized to fit just about any application
Comes with an extra set of jaw screws just in case you lose some
Vibrations or wobbling at any speed

Best For holding bowls: VINWOX 1 Lathe Chuck

Buy on Amazon

The vinwox 1 lathe chuck is capable of outshining several other chuck featured in this list in overall features in its price range. This chuck is a 1” x 8 tpi thread, which is fairly common for most midi lathes. It includes a chuck body, a set of tightening levers, a allen wrench, screw chuck, adapter converts 1'' x 8tpi to 3/4" x 16tpi and free automatic spring loaded center punch, make sure check your wood lathe fit first. The external jaws spread inside of workpieces with pilot holes ranging from 2" to 3-5/8" Included screw chuck provides even more options for supporting your projects.

The jaws all move at the same time which automatically keeps the piece centered. It works good and holds your work very good. The unit is well built and heavy. It comes with an adapter for 16tpi.

Why We Like This:

Simple set up, tightens easily and remains viable during the entire turn
Very well made, accurate and sturdy
Easy to use and comes with extra jaws
A well made and finished inexpensive wood lathe chuck

Best For any skill level Wood worker: Wen 1 Lathe Chuck

Buy on Amazon

The wen 1 lathe chuck is satisfactory and appropriate and fits well with your daily purpose. This is a solid self-centering chuck for the pricepoint. It holds the material firmly and solid. It is great value and very well made, with the twist turn to tighten down on the piece of wood giving assurance that it will be well held during turning. It will attack to any lathe with a 1-inch x 8tpi thread mantle.

This fits the nova chuck though the mounting holes have to be drilled out slightly to fit the standard nova screws. It is a simple device and doesn't take much to get setup. The replacement is much smoother and performs very well. They are inexpensive and work well.

Why We Like This:

Screws directly onto a delta lathe
Lot of satisfied buyers

Best Solid face Plate: Phukimlong 1 Lathe Chuck

Buy on Amazon

The phukimlong 1 lathe chuck should be able to handle its purpose and duties with ease. Phukimlong's sense of achievement comes from the design and product of woodworking tools products that bring more convenience to customers. It is a nice solid well made faceplate. It holds heavier objects more securely at higher turning speeds. The threads are well formed and tight fitting, the registration is very well machined, the face is perfectly perpendicular to the axis of the lathe, and the overall fit and finish is perfect.

The face plate offers twice the fastening potential of a 4 hole face plate. It is suitable for mini and mid-size lathe.

Why We Like This:

A variety of woodworking tools, supplies and accessories
4 mounting holes on the plate, easy installation of the workpiece
Made of steel, heavy and rigid

Best For mill: HHIP 1 Lathe Chuck

Buy on Amazon

Hhip makes beautiful and great chuck with classic and smartly choosen materials. The chuck looks like it is made of quality stainless steel. It fits the grizzly G9829 with minimal machining, plenty of material to work with, and the bolt holes line up well enough. The mounting plate is high grade casting steel for it's machinable properties. If the backplate inserts snuggly then it will serve to hold the chuck precisely in position relative to the backplate and thus the lathe itself and its tooling.

Take off 5 or 6mm of metal off the small end of the backplate will bring the threads closer to the outer surface so that the threads on the spindle will have more to grab on to. The insert on the large end of the backplate is 76.6mm in diameter while the recess on the back of the chuck is only 74.6mm in diameter. This is enough to register the chuck solidly. The raised ring on the front of this adapter appears to be a nonstandard size.

Why We Like This:

Milling required to fit most chucks
Cuts like cast iron, lots of crumbs, dirty and rough finish
Sticky when opening or closing the jaws

Best For rotary table: Findmall 1 Lathe Chuck

Buy on Amazon

The findmall 1 lathe chuck is specially designed for your regular usage and has all useful features. There are a number of bolt circle pattern makers that will work to lay out the holes you need. It is a 115mm diameter bolt circle with 3 8mm mounting holes. The chuck key can barely be turned by hand. It comes with the key, internal and external jaws, and new cap head screws. The high-quality tools will help you increase your productivity. It fits a 1x8 tpi and also it is perfect for normal use. The runout is minimal and functions as it should.

Why We Like This:

Perfect fot for harborfreight mini lathe replacement
Well oiled, no rust, operated smoothly, no need to take apart and clean
Smooth operation through range of travel

Best For smaller dowels: shop Fox 1 Lathe Chuck

Buy on Amazon

If you often find yourself scrambling for appropriate and satisfactory chuck, shop fox 1 lathe chuck is your end point. This 2-inch diameter 3-jaw mini lathe chuck is a self-centering scroll type chuck with reversible jaws. It fits the adjustable ring mandrel perfectly. It fits the wood nicely and tight. It is perfect for 1/2 inch or smaller dowels. It fits the mini lathe and also will keep the long term. It is a solid tool with metal jaws. It comes with two arbors. It is perfect for polishing rings.

Why We Like This:

Includes mt no.1 and mt no.2 arbors and wrenches
Packaged very well and sealed with lubricants
Excellent mini lathe chuck with arbors

Best For Mini Lathe: Tinkerbay 1 Lathe Chuck

Buy on Amazon

The tinkerbay 1 lathe chuck should be able to handle its purpose and duties with ease. If you're looking for a good self centering chuck on a budget, you can't go wrong with this one. It is made from steel machined to allow closest tolerances with an electric coating for long term anti-rust performance. It is compatible with lathe that use 1”x 8 tpi thread, and 3/4" x 16 tpi using the adapter.

This chuck will fit any lathe with a 1 inch 8tpi spindle. It is easy to install or remove each with 2 small bolts. There's a 3/4" x 16 tpi adapter with it for smaller spindles. The action/movement is smooth and precise.

Why We Like This:

Keeps a strong hold of the work piece
Nice wood lathe chuck, has nice finish on chuck and jaws
One of the new comers and featured product

Best For milling machine: SENDUO 1 Lathe Chuck

Buy on Amazon

It is great with a jet 1015 mini lathe. It can stand high-intensity work additionally it is well-designed and made of high-quality steel. This chuck fits perfectly on the head stock and at 3/4 of max speed there is no vibration. It can help you better install the chuck to the wood lathe chuck. It comes out of the box with the larger jaws mounted firmly. The other set of chuck blades will come in very useful. It is durable wood lathe chuck and has a greatly service life. It is so well balanced that vibration is at a minimum.

Why We Like This:

Runs true, smooth action and very well built
Accuracy, performance., durability, and ease of use
Centering improves the flexibility of the chuck, can clamping most shaped workpieces