It is important to have the best 1998 5.7 vortec shorty header. In the following post, we will help you to select the best 1998 5.7 vortec shorty headers.

Our review process: Show/Hide

Our Top Picks:

Best Overall: Buy: Bbk 1998 5.7 Vortec Shorty Header READ REVIEW

Best For Spark Plug: Buy: Mmi Motorsports 1998 5.7 Vortec Shorty Header READ REVIEW

Best For Chinese Headers: Buy: Lucasng 1998 5.7 Vortec Shorty Header READ REVIEW

Best For Oil Filter: Buy: Million Parts 1998 5.7 Vortec Shorty Header READ REVIEW

Best For Driver Side: Buy: Gibson Performance Exhaust 1998 5.7 Vortec Shorty Header READ REVIEW

Best For Good Quality: Buy: Pacesetter 1998 5.7 Vortec Shorty Header READ REVIEW

Best For Passenger Side: Buy: Easyberg 1998 5.7 Vortec Shorty Header READ REVIEW

Best For Air Flow: Buy: Dna Motoring 1998 5.7 Vortec Shorty Header READ REVIEW

Best With Sbc Chevygmc Truck: Buy: Ateam Performance 1998 5.7 Vortec Shorty Header READ REVIEW

Best For Direct Replacement: Buy: Pg Powergo Motorsport 1998 5.7 Vortec Shorty Header READ REVIEW

Best Overall: Bbk 1998 5.7 Vortec Shorty Header

Buy on Amazon

Not everyone likes to purchase headers for their daily purpose, but the Bbk 1998 5.7 Vortec Shorty Header would be an anomoly. The bbk 1998 5.7 vortec shorty header allows for perfect fit, sounds good and it is the best. Make sure this fits by entering your model number. These bbk performance shorty tuned length exhaust headers are designed and constructed as direct - fit replacements for all 09.

The header looks great and it is made for the passenger side. Also, the header is simple and it is used for header bolts. Above all, the bbk 1998 5.7 vortec shorty header is built for great sound and it has improved torque.

Almost all buyers found that the header is described as a 3-4 hour job. Further, they also found that the header is well worth the headache, time, and new foul words.

• This is seated well after retightening a couple of times, judging by the sound.
• This comes with fit right and it is made for easy installing.
• This is your number one aftermarket performance exhaust brand in the USA.
• This looks good and may replace the rest of the exhaust in the future.

Best For Spark Plug: Mmi Motorsports 1998 5.7 Vortec Shorty Header

Buy on Amazon

Best part: Mmi Motorsports 1998 5.7 Vortec Shorty Header costs comparatively low and it is available to ship in 24 hours. The mmi motorsports 1998 5.7 vortec shorty header is for small block, It resists corrosion and has a perfect design. Make sure this fits by entering your model number. And, the header is made of high quality steel with a 2 x 4-1 direct bolt-on design.

The header is great for superior quality, it has high flow air and has a high - flow design. Above all, the mmi motorsports 1998 5.7 vortec shorty header is designed for street rods, is strong, it is perfect for heavy duty and has a great design.

In short, the tone of buyers is very positive and we believe that the header suits the purpose.

• Made of high quality steel with a 2 x 4-1 direct bolt-on design.
• Fits 1955 and 265-283-305-307-327-350-383-400 chevrolet v8 engines.
• Increase high flow air, instantly gain 10 to 15 hp. / tq.

Best For Chinese Headers: Lucasng 1998 5.7 Vortec Shorty Header

Buy on Amazon

The Lucasng 1998 5.7 vortec shorty header is suitable and reliable and fits well with your daily uses. The Lucasng 1998 5.7 vortec shorty header well and it is used for header bolts. Make sure this fits by entering your model number. These are universal turbo headers and are not designed to work with any specific application or accessory.

Above all, the Lucasng 1998 5.7 vortec shorty header is also not recommended due to heat & clearance.

Almost all buyers found that the header is good for Chinese headers. Also, they also found that the header fit well as a down and forward header.

• This is designed for smooth flow and it allows for improved throttle response.
• This is perfect for great quality and it is made for small blocks.
• This takes for professional installation, is pretty good and it is best for good fit.

Best For Oil Filter: Million Parts 1998 5.7 Vortec Shorty Header

Buy on Amazon

Million Parts has been making great headers for years, thanks to a combination of clever design and appropriate materials. The Million Parts 1998 5.7 Vortec Shorty Header fits well and it works with part number. Make sure this fits by entering your model number. Furthermore, the header cut to fit, fits great and it is great for header bolts.

The header is made with great welds and it is good for the passenger side. Above all, the million parts 19985.7 vortec shorty header is compatible with dodge dakota ram 1500, 2500, 3500 pickup, 5.2, 5.9l, pair ags0085.

Most customers agree that the header fits for 2000 dodge dakota, sport/ r/t /slt, 5.9l v8 gas, but execpt for 2000 dodge dakota, r/t, 5.9l v8 gas, 2 door extended cap pickup. And, they strongly agree that the header looks good on the truck. And, they strongly agree that the headers are very easy compared to others.

• This is made for tight fit, works well for oil filters and it is primary.
• Delivers what they promise.

Best For Driver Side: Gibson Performance Exhaust 1998 5.7 Vortec Shorty Header

Buy on Amazon

Compared with other headers in this category, the Gibson Performance Exhaust 1998 5.7 Vortec Shorty Header has a convenient design. The gibson performance exhaust 1998 5.7 vortecshorty headers are well suited for lowered and raised vehicles, street and off-road. Make sure this fits by entering your model number. Also, this improves the engine’s ability to breathe and cooler operating engine temperature.

Finally, the Gibson performance exhaust 1998 5.7vortec shorty header is perfect for tight fit, it can qualify for free shipping and has a header style.

Overall, for almost all buyers, Gibson Performance Exhaust product was best suited.

• 1.5 in. Tubing; w/egr fitting; incl. Flanges/gaskets.
• will not affect the factory warranty. meets EPA and carb requirements.
• This is good for good quality, is most and it is made with header bolts.
• This has definitely increased horsepower and it comes with fit right.

Best For Good Quality: Pacesetter 1998 5.7 Vortec Shorty Header

Buy on Amazon

If you often find yourself confused about convenient and suitable header,s Pacesetter 1998 5.7 Vortec Shorty Header should be your first option for buying. The pacesetter 1998 5.7 vortec shortyheader is primary and it is working great. Affordably priced pacesetter headers are one of the best ways to improve your vehicle's performance and efficiency. These shorty headers bolt on in place of the stock exhaust manifolds for greater engine efficiency.

The header is easy to install with basic skills. Lastly, the pacesetter 1998 5.7 vortec shorty header is thick and it is great for good quality welds.

One customer says - "Use a pencil grinder to enlarge the area around you spark plugs for easier access & use header studs instead of bolts. ". Most buyers opine that the header that comes with it is for shipping only and will burn off if left on.

• Unsurpassed fit and easy to install with basic skills.
• This is made with thick flanges, works with noticeable improvement and it works perfectly.
• This is designed for optimum seal and flow.
• These are all the necessary gaskets, fasteners and installation instructions.

Best For Passenger Side: Easyberg 1998 5.7 Vortec Shorty Header

Buy on Amazon

The Easyberg 1998 5.7 Vortec Shorty Header's high-end materials make sure that it ages well with use. The easyberg 1998 5.7 vortec shorty header for customer service, is important and it is simple. The manufacturer says: We stand behind our headers in saying you will not find a better - fitting, quality - built, budget header for your vehicle. And, this is perfect for ls swap and it is positive. Lastly, the easyberg 19985.7 vortec shorty header is most, is 4wd and it is for the passenger side.

Almost all buyers opine that the header is for an LS engine and not a dodge. Also, they also found that the header fits a 2003 silverado 2wd. Obviously, this header passed the test and had very satisfied buyers eager to share their experience.

• ➹Fitment:(1960-1966 c10 trucks require slider engine mounts to clear the front crossmember)except 86 c10.
• ➹Fitment:1988-1998 c1500 trucks (silverado, sierra) 1"" offset back motor mounts required.
• ➹Fitment:c10 pickups: chevy & gmc trucks 1960+.

Best For Air Flow: Dna Motoring 1998 5.7 Vortec Shorty Header

Buy on Amazon

We know from years of feedback from readers, amazon sellers, and family and friends what most people want in a convenient and appropriate header. The Dna Motoring 1998 5.7 Vortec Shorty Header is exactly that - it's a simple header that hits all the right notes. The dna motoring 1998 5.7 vortecshorty header is used for full length, It is great for the exhaust pipe and has a nice style. look look. The Manufacturer says: We also do rigorous testing on the strength, durability, as well as longevity of the material in order to make sure when the product arrives at the consumer 's end that it’s ready to go without worries. If these three strokes consume power, they are a drain on the engine.

The header can put more power through the wheels, pushing the vehicle. Also, it is made of high quality t-304 stainless steel material. Finally, the dna motoring 1998 5.7vortec shorty header has increased high flow air, It is good for the passenger side and has a professional design.

Most buyers agree that the header does fit a ram 2500 4x4 with some modifications. In addition, they say that the header works well and sounds nice, but be prepared to cut, bend, and weld as needed. In conclusion, buyers found this to be one of the best headers for daily purposes.

• Increase high flow air, instantly gaining 10 -15 hp./ tq.
• 4-1 full length header design; 3" mm y-pipe included.
• This is on a 97 ram 2500.
• Tig welded cnc machine flanges; o2 sensor bung included.

Best With Sbc Chevygmc Truck: Ateam Performance 1998 5.7 Vortec Shorty Header

Buy on Amazon

Not everyone likes to purchase headers for their regular use, but the ATEAM performance 1998 5.7 vortec shortyheader would be an anomoly. The ATEAM performance 1998 5.7 vortec shorty header is very nice, is 4wd and it looks great. Heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. Further, this is compatible with sbc chevygmc truck 1500, 2500, 3500 88.

The header is primary and it is made for header bolts. Finally, the ATEAM performance 1998 5.7 vortec shorty header is designed for stock or mildly modified engines for the value-conscious buyer.

Most buyers opine that the header fit with a bit of modification.

• Compatible with sbc chevy/gmc truck 1500, 2500, 3500 88-95 5.0l 5.7l 2wd and 4wd.
• Made from durable 16-gauge steel, the pce headers feature 3/8 in" thick flanges.
• This is thick and it is made with thick flanges.

Best For Direct Replacement: Pg Powergo Motorsport 1998 5.7 Vortec Shorty Header

Buy on Amazon

We would, of course, be remiss if we didn't mention Pg Powergo Motorsport 1998 5.7 Vortec Shorty Header for daily purpose. The pg powergo motorsport 1998 5.7 vortec shorty header is good for direct replacement and it is very nice. Make sure this fits by entering your model number. Also, it is thick and it is most. Finally, the pg powergo motorsport 1998 5.7 vortec shorty header will not fit vortec engines tech specs header type.....short tube / shorty primaries diameter...1-1/2 in.

Consequently, buyers were eager to recommend it to friends and would-be buyers.

• head flange is laser-cut from 7/16-inch (11.5mm) thick steel plates and flattened by a hydraulic press.
• Direct replacement of stock manifolds and bolt-on fit for stock exhaust pipes.
• Most efficient at providing horsepower gain from idle to mid-range rpm.
• Fully mandrel bent tubes made of 16-gauge (1.5mm thickness) 304 stainless steel.