The 9 Best 3 Way Splitters For Cable TV (2023 reviews)

The extreme 3 way splitter for cable tv is capable of outshining several other splitter featured in this list in overall features. It works very well as a splitter. The combination of this splitter and the -3.5/-7dB splitter works great with an amplified antenna. It is quite variable when using a non-amplified antenna. The Extended product lifezinc alloy die cast housing and back cover eliminates galvanic corrosion caused by dissimilar metals. This will greatly effect the digital video presentation on one or all sets. It works with digital ota antennas.

This is a well made splitter however you must have enough signal strength to use the multiple output connections. It’s good to have extras incase there are ever any problems.

Why We Like This:

Great signal strength, no bleed between ports going out
Connect the splitter outputs to the various devices with high definition rf inputs
One of the new comers and featured product

Best With One Antenna: Monoprice 3 Way Splitter For Cable TV

Buy on Amazon

Not everyone likes to purchase splitter for their daily usage, but the monoprice 3 way splitter for cable tv would be an anomoly. This signal splitter allows three coaxial cable pieces of equipment to receive cable signals from one cable wall connection. It allows cable access for tv and also internet connectivity. It is used for one input or antenna/cable source that can be spliced into 3 different lines. The Splitter works great with no noticeable loss of signal. It includes a grounding screw for added protection. The incoming signal is good and strong for both TVs. It's a cost effective means of splitting the signal between 3 different coaxial runs.

Why We Like This:

Good splitter without signal reduction and interference from another tuners combined
Solid construction, with no noticable signal loss
Delivers what they promise

Best For Satellite: Anhan 3 Way Splitter For Cable TV

Buy on Amazon

Not everyone likes to purchase splitter for their daily purpose, but the anhan 3 way splitter for cable tv would be an anomoly. A coaxial connector consists of an inner conductor, outer conductor, and insulating material, which provide excellent shielding to prevent interference and signal leakage. It allows 2 units to be operated from one source like cable television (catv), vcr, dvd, hd-tv, satellite receiver, cable box, or antenna into multiple outgoing signals, and all other home theater audio/video equipment. It improves signal quality, reducing packet loss for modems, and for all other devices.

Using this item with 2 ell connectors to the antenna input allows "rabbit ears" and directional antenna input simultaneously. It is great for 2 antenna hookups. It is used to connect televisions, cable boxes, and other video equipment to receive television signals. The "open" side of the splitter can make the signal unbalanced. It can be used in wireless communication systems, such as cellular networks and wi-fi, for signal transmission and reception.

Why We Like This:

Fairly fragile but fully functional for splitting off power to a second device
Signal transmission is clear and consistent
Lot of satisfied buyers

Best With All standard And Digital Cable TV services: reliable Cable products 3 Way Splitter For Cable TV

Buy on Amazon

If you often find yourself scrambling for appropriate and satisfactory splitter, reliable cable products 3 way splitter for cable tv should be your first option for buying. It includes a special coax cable used specifically for power. The bypass port allows you to connect any device to the amplifier (usually a cable modem or voip phone device) and insure operation of that device in the event of a power failure. It can be mounted indoors or outdoors, but it does require power. It provides a connection point for voip equipment, so that a power failure will not affect services.

The power connection also uses a coax cable with an F connector which is provided in the box. It is compatible with all standard and digital cable tv services, including the "triple play" phone service. The build quality is very good, and the product has some weight to it. The case holding the connectors is rugged and feels very solid.

Why We Like This:

Definitely gets hot plus it is made of metal not a plastic unit
Perfect solution to low cable signal
Safely splits cable signal to multiple devices with no signal loss

Best With No Signal Loss: RCA 3 Way Splitter For Cable TV

Buy on Amazon

The rca 3 way splitter for cable tv should be able to handle its purpose and duties with ease. All of the televisions get excellent reception with plenty of signal strength and they never drop off of pixilation. This splitter goes from 5 to 1000 mhz and covers the entire spectrum. It's a straight forward device with little more depth than yes or no, black and white, works or doesn't. The two way splitter also feeds a media center PC, giving it the same signal level as the other outputs. They might even give you splitters and cables for free rather than risking signal leakage. It has very low signal loss. It's great for unpowered antenna.

Why We Like This:

Works fine with hd cable and cable modem
You can hook up three tvs to one antenna
One of the new comers and featured product

Best For TV Antenna: Pingbingding 3 Way Splitter For Cable TV

Buy on Amazon

The pingbingding 3 way splitter for cable tv is the best convenient splitter on the market today. The antenna kit is extremely easy to setup, but installation depends on your attic or roof. It allows the rotor control to work properly. You can use this special splitter between the antenna and the control box, so do not worry about how the motor is powered. It is easy to assemble and instructions are easy to follow. It is easy to set up and easy to set up because the directions are spot on.

Why We Like This:

Internal circuit board for better reliability/durability
Low signal loss of 3.5db on each output port improving performance and speeds
Lot of satisfied buyers

Best For present And future transmission Technologies: Antronix 3 Way Splitter For Cable TV

Buy on Amazon

The antronix 3 way splitter for cable tv should be able to handle its purpose and duties with ease. The CMC2000 series digital splitters are encased in a zinc alloy diecast housing with nickel alloy plating and employ high Q surface mount technology (SMT) components. The ferrite remains ultra linear to prevent intermodulation where high level return carriers can affect forward path video signals. It is ideal for present and future transmission technologies, and various media such as telephony, voice, and transmission sensitive higher order modulation schemes such as qpsk and qam.

Why We Like This:

Guaranteeing consistent performance over time and temperature
Capacitively coupled f-portsprotects against core re-magnetization and saturation while blocking ac surges
Lot of satisfied buyers

Best For indoor Use: ideal 3 Way Splitter For Cable TV

Buy on Amazon

The ideal 3 way splitter for cable tv's superior materials makes sure that it ages well with use. High performance 2.4 GHz Digital Splitters are used for splitting a single coax line into three lines. It allows any of the ports to be used to pass power from the satellite set top box to the satellite dish or multi-switch. This works great to split the cable signal.

These splitters are designed for applications that operate in the 5 mhz to 2.4 ghz range, which include satellite, digital/hd cable tv, broadcast (over the air) tv, cctv and other general-purpose coaxial cable splitting requirements. It is used to split a signal in two ways. Machine formed threads on the F ports allow for smooth connector mating.

Why We Like This:

All ports on the 2.4 ghz splitters are power pass enabled
Soldered back (not glued) for improved emi/rfi performance
Delivers what they promise

Best With existing And future networks: generic 3 Way Splitter For Cable TV

Buy on Amazon

The generic 3 way splitter for cable tv is suitable and reliable and fits well with your daily usage. Antronix digital splitters are premium-grade passives designed specifically for two-way multimedia communications. The CMC4000H series of 1.218 GHz digital splitters are optimized for optimized MoCA 2.0 performance, Antronix's 5-1675 MHz splitters deliver new and expanded function for compatibility with MoCA products and for optimal data rates. It protects the back of the housing where corrosion is more prominent. Low inter-modulation design and excellent optimized return band isolation prevents high cable modem signals from affecting forward band transmissions.

The Zinc Alloy Diecast Housing and Backplate w/Nickel Tin Plating Superior corrosion resistant plating combined with a diecast backplate protects the back of the housing where corrosion is more prominent. Its Flat 1.218 GHz Bandwidth with Minimal Insertion Loss Supports present and future multimedia applications including video, data and telephony. It is compatible with existing and future networks such as voip and docsis 3.

Why We Like This: