The 9 Best 35 mm hinge boring Bits (2023 reviews)

Here, we review bit that manages to win our hearts. It's the freud 35 mm hinge boring bit and it's widely considered as one of best bit you can buy. This bit cut perfect for cabinet hinges. It offers the cleanest cut and the carbide tipped forestners which offer the longest lasting edge. The top of the cutter is the same depth as the hinges, so it makes measuring easy. The fluted cutting edges of this bit really do leave a super clean hole.

The hole diameter is just right for 35mm Euro hinges, and the pilot point doesn't extend too far below the bottom of the hole. It takes a great deal of accuracy not to end up with a little hole at door front. The chucking length is 31 mm, the overall shank length is 74mm, including chucking length.

Why We Like This:

Precise clean holes, even while using a cordless drill
Great bit and perfect for the hinges
A great bit for hinges and other holes
Very sharp bit, with nice clean holes and very flat bottoms

Best For hinge: Hengzhe 35 mm hinge boring Bit

Buy on Amazon

This bit has an adjustable depth stop which can be used to dial in the correct depth stop that you require. The sharp center spur accurately locates the center of your hole. The hinges fit perfectly. The depth guide works perfectly to control the depth of your cut.

The bit has very sharp cutting edges and the depth stop that is built into the bit is fabulous, but when trying to use the bit in a cordless drill, the bit wanders significantly, as in oblong holes. The jig to keep you in the right place is helpful as well.

Why We Like This:

Works best in a drill press
Clean and accurate hole cutting time after time
Drill flat bottomed holes without splintering

Best For Steel: Katur 35 mm hinge boring Bit

Buy on Amazon

Not everyone likes to purchase bit for their daily usage, but the katur 35 mm hinge boring bit would be an anomoly. The Forstner auger drill bit is designed forfighting hinges, woodwork and plywood perforation, and plastic products. Cutters with anti-kickback design can drill smoothly, producing clean flat bottomed hole. It is suitable for drill press, pistol drill, bench drill, vertical drilling machine, hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.

Why We Like This:

Efficient and accurate to drill, no further cleanup of the edge required
New and hot release

Best For boring concealed hinges: Dashhound 35 mm hinge boring Bit

Buy on Amazon

Compared with other bit in this category, the dashhound 35 mm hinge boring bit has a convenient design. Carbide cross tips with 2 precision ground cutting edges stay sharper for long-lasting cutting performance. It maintains a straight axis during the drilling process. The sharp center cutter accurately locates the center of your hole to ensure for efficient work. It has a double-edged rear edge angle design to reduce cutting resistance and free chip removal. It can be used on a drill press.

It is great for boring concealed hinges and door locks.

Why We Like This:

Solid carbide construction and a rigid quality keep safe and reliable operation
Great used for mounting spherical door shoot tip, drawer
Optimized alloy blade, carbon steel body, make the fostner bit durable, and more smoothly

Best For low cost Bits: Jiecheng 35 mm hinge boring Bit

Buy on Amazon

Best part: jiecheng 35 mm hinge boring bit costs comparatively low and it is available to ship in 24 hours. If you have a few holes to drill and want to avoid breaking through, this is a great low-cost tool. The forstner drill bit has tungsten alloy carbide, which can make holes on the wood very easy. It can drill all kinds of wood, plastic, plywood etc. The diameter of the hinge boring bit is 35 mm, and the adjustable cup can make different depth of holes from 15 mm to 40 mm or more. It is useful in house decoration and cabinet production, and it is good to make the hole and assemble the hinge. The tip is very sharp. It is packed in a plastic box, and easy for storage.

Why We Like This:

New and hot release
Good brand reputation

Best For concealed hinge: Milescraft 35 mm hinge boring Bit

Buy on Amazon

If you want nothing but the best desirable bit, then milescraft 35 mm hinge boring bit is the one you should definitely consider, as it manages to bring a lot to the table. This 35 mm boring bit is designed to make cup holes for concealed hinge cabinets and is a replacement for the milescraft eurohingejig. The four tungsten carbide cutting tips bore smooth, and accurate cup hole walls and a perfectly flat bottom surface. The 35 mm cutting surface creates standard-sized cup holes for European-style concealed hinges. It is durable material to keep blades cutting smooth for an extended life span.

Why We Like This:

35 mm cutting surface creates standard sized cup holes and 3/8in
Extra sharp blades make quick work of cup holes
One of the new comers and featured product

Best For INDUSTRIAL hinge installation: Aoktorkit 35 mm hinge boring Bit

Buy on Amazon

Compared with other bit in this category, the aoktorkit 35 mm hinge boring bit has a convenient design. There are 16 different sizes of forstner drill bits to meet your different needs. The sharp center spur accurately locates the center of your hole. It is made from high speed steel and is hot-treated, making the blade more sharp, high accuracy and durable, smooth cutting operation, good resistance to shock and good toughness. The cutting material must be fixed, and the drill bit should be perpendicular to the material.

These are normal round shank drill bits. The bit in the positioning is requiired to very low speed, and then gradually accelerate after complete position. It improves the opening speed and makes the chip removal easy. It can be used in drill press, bench drill, vertical drilling machine, cnc carving machine. It is suitable for industrial hinge installation, wood processing and maintenance, model production, installation of spherical door, drawers and other occasions.

Why We Like This:

High quality alloy, special heat treatment technology, sharp edge
Sharp edge, accurate positioning, high hardness, impact resistance, high precision, smooth cutting, high toughness
New and hot release

Best For hardwood: Auniwaig 35 mm hinge boring Bit

Buy on Amazon

Auniwaig line of bit come in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. It is used for drilling precision holes in most of different types of wood, such as drawer, mounting spherical door shoot tip, perforation on wood products, and plastic products etc. It is made from high quality carbide tungsten steel and is hot-treated, sharp edge, high hardness, accurate positioning, high precision, smooth cutting, impact resistance, high toughness. The cylindrical cutter around the perimeter shears the wood fibers at the edge of the bore, and also helps guide the bit into the material more precisely. It includes a center point which guides it throughout the cut and incidentally spoils the otherwise flat bottom of the hole.

It is suitable for pistol drill, bench drill, vertical drilling machine hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine, etc. It can not drill metal and non-ferrous metal, otherwise the hole opener will be damaged quickly. It has a design for easy chip-removal and no tremor.

Why We Like This:

Suitable for cutting holes onto any wood and wood products
Arc curve design head for easy chip-removal, more efficient perforation
Small incision resistance to improve the opening speed

Best For platform Drilling equipment: Uxcell 35 mm hinge boring Bit

Buy on Amazon

Uxcell is known for creating pragmatic and minimalist bit for people on the go, and its line of uxcell 35 mm hinge boring bit definitely falls in line with that reputation. This forstner drill bit is high hardness, wear resistance, good toughness, heat and corrosion. It is suitable for platform drilling equipment such as bench drill, vertical drilling machine, and cnc carving machine. It is specially designed to cut through the hole cleanly, great for boring concealed hinges and door locks. It is good at removing the debris and working efficiently with a radian curved design.

The Tungsten carbide cutting tip with special heat treatment for sharp cutting edge, high hardness, non-burrs and durable use. It can be used for drilling holes on wood and plastic products, furniture, door hinge. It is more accurate and safer to use these drill bit sets in a drill press. The cutting edge and tip of the opener should be sharpened in time.

Why We Like This:

Arc curve design head for easy chip-removal, more efficient perforation
Applicable to various gypsum, plastic, wooden board, solid wood, artificial wood, indispensable woodworking gadget
Higher efficiency with the 3 teeth cutter head