The 12 Best 4 Jaw Chucks For Harbor Freight Lathe (2022 reviews)

We are personally inclined towards working 4 jaw chuck for harbor freight lathe, It is not so pricy, but it overachieves its purpose and is outstanding in important aspects. The 4 jaw chuck for the harbor freight lathe is perfect for holding bowls, spindles, and other unwieldy lathe projects. Inch 4-jaw self-centering keyed scroll chuck. Moreover, the chuck is of great quality, has mounting thread and it is worth the money.

The chuck is sturdy and it fits properly. And, it features a 1” x 8 tpi thread for compatibility with the majority of wood lathes on the market. Lastly, the 4 jaw chuck for harbor freight lathe works great and it is inexpensive.

Most buyers quickly discovered that the chuck is designed to clamp a square pen blank. In addition, they also found that the chuck is a simple device and doesn't take much to get setup. In addition, they strongly agree that the chuck comes with screws to attached to the g3 chuck, The g3 screws are too big in diameter so the jaws needed to be drilled out bigger with a 1/4 drill bit. With no doubts, this product passed the test and had very satisfied buyers eager to share their experience.

Top Customer Quotes:

This is a good report on that low - priced chuck.
The run - out on the chuck leaves something to be desired.
Remember when you had maximum versatility with your wooden lathe.
This is great for turning cups, shot glasses, and fishing lures.

Best For Heavy Duty: Psi Woodworking 4 Jaw Chuck For Harbor Freight Lathe

Buy on Amazon

Best part: Psi Woodworking 4 Jaw Chuck For Harbor Freight Lathe costs comparatively low and it is available to ship in 24 hours. The psi woodworking 4 jaw chuck for harbor freight lathe is pre-threaded to 1" x 8tpi and includes a 3/4" x 16tpi headstock spindle adaptor. Chuck 's body weighs 4 lbs and is 4" in diameter. Also, it is sturdy and it is worth the money.

The chuck does the job, it works great and it fits perfectly. In addition, it is compatible with all "c-series" jaws and accessories. Most importantly, the psi woodworking 4 jaw chuck for the harbor freight lathe works perfectly and it works as intended.

Most buyers quickly discovered that the chuck would open the jaws and they could fall out. In addition, they also found that the chuck has made lathe work a lot easier. Moreover, they say that this chuck has been adequate and at a good price. Overall, buyers found this to be one of the best products for daily purposes.

Top Customer Quotes:

This works with the jet because it comes standard with the correct threads.
This comes with one set of jaws (installed) and one extra set.
It is pretty heavy and takes a moment to get spinning at full speed.
This will probably require a lot of force.

Best For Excellent Price: Vinwox 4 Jaw Chuck For Harbor Freight Lathe

Buy on Amazon

We know from years of feedback from readers, amazon sellers, and family and friends what most people want in a convenient and appropriate chuck. The Vinwox 4 Jaw Chuck For Harbor Freight Lathe is exactly that - it's a simple chuck that hits all the right notes. The vinwox 4 jaw chuck for harbor freight lathe is stable and it looks nice. The manufacturer says: The commitment at speed force is to constantly strive to develop and introduce new, innovative, exclusive products offering great value in each category, which provide our customers with products and solutions that meet their highest expectations. And, this is used for machine tools and accessories for general lathes and industrial machines.

The chuck is perfect for holding bowls, spindles, and other unwieldy wood lathe projects. Finally, the vinwox 4 jaw chuck for harbor freight lathe runs true, is built for a long life, It is sturdy and has a great design.

Most buyers quickly discovered that the chuck is perfect for the avid hobbyist or beginners. Moreover, a few also found that the chuck is not a one - hand operation as it takes two hands to tighten and one to hold in place. And, they strongly agree that these would fit a la4444 chuck. Obviously, this chuck passed the test and had very satisfied buyers eager to share their experience.

Top Customer Quotes:

This is perfect for a beginner lathe'r and beyond.
This comes with extra jaws to add to that, it is made from good parts.
This has done very well well and most of all, worked well.
This comes with tightening tools required.

Best For Long Service Life: Orangea 4 Jaw Chuck For Harbor Freight Lathe

Buy on Amazon

Next on the list, we've got yet another chuck that manages to win our hearts. It's the Orangea 4 Jaw Chuck For Harbor Freight Lathe and it's widely considered as one of the most convenient chucks you can buy. The orangea 4 jaw chuck for harbor freight lathe is a positive l-shape, and the external jaw is an inverted l-shape. starts to operate, and the bevel gear controls the precision of the work - piece held by the chuck. The wood lathe chuck jaws and three jaws are self - centering, the alignment accuracy is less than or equal to 0.002 " / 0.05 mm, and no adjustment is required after installation.

The chuck has high strength and toughness, compression resistance and durability, and a long service life. In addition, it is equipped with a set of reversible jaws, The external jaw clamping range is larger than the internal jaw, which is suitable for clamping a variety of industrial parts. Lastly, the orangea 4 jaw chuck for harbor freight lathe is self-centering and requires no calibration, installation is simple and quick.

Almost all customers found that the chuck comes with an allen wrench, Additionally it is good value for a 6" 3-jaw chuck. And, a few strongly agree that the chuck is used to build a roll out wheel for pipe fabrication. Moreover, they say that the chuck could been used in the last 40 + years. To sum up, the tone of buyers is very positive and we believe that the chuck suits the purpose.

Top Customer Quotes:

The clamping range of this chuck is between 016 " 4 mm.
The chuck requires a back mount plate with a 7.09 inch bolt circle.
It is great to see holes in flagen and small pieces of pipe.
This is the standard orange k 3 jaw. It should be standard.

Best For Good Value: Mophorn 4 Jaw Chuck For Harbor Freight Lathe

Buy on Amazon

We know from years of feedback from readers, amazon sellers, and family and friends what most people want in a convenient and appropriate chuck. The Mophorn 4 jaw chuck for harbor freight lathe is exactly that - it's a simple chuck that hits all the right notes. The Mophorn 4 Jaw Chuck For Harbor Freight Lathe features a wide clamping range and high precision. The k72 lathe machine chuck works with few vibrations, ensuring you will get accurate finished parts. The lathe chuck body is made of high - quality cast iron that is rigid and durable, and it looks low - profile.

The chuck is suitable for installation on a metal lathe chuck and clamping workpieces of various shapes. In addition, it is equipped with three inward stepped jaws that can be stepped inward or outward to hold raw materials of different shapes. Lastly, the mophorn 4 jaw chucks for the harborfreight lathe are set respectively and can stop in different places.

Almost all buyers find that the problem is resolved by a thorough cleaning. Also, they strongly agree that the chuck is a great chuck for the 7x mini lathe. Moreover, they say that this chuck is well built and the quality is good. In short, buyers found this to be one of the best products for daily purposes.

Top Customer Quotes:

The t chuck key of the lathe part allows the installation of various workpieces.
This lathe chuck is from Asia and the quality is excellent.
And easy operation reduces changeover time for your convenience.
This features four independent jaws plus it is the perfect choice for your lathe machine.

Best With Exquisite Workmanship: Rattmmotor 4 Jaw Chuck For Harbor Freight Lathe

Buy on Amazon

Not everyone likes to purchase chucks for their regular usage, but the Rattmmotor 4 Jaw Chuck For Harbor Freight Lathe would be an anomoly. The rattmmotor 4 jawchuck forharbor freight lathe is perfect for high quality, allows for fast, efficient delivery and it is important. Make sure this fits by entering your model number. The single - action adjustment center can be used for processing various shapes and has a greater clamping force.

Most importantly, the rattmmotor 4jaw chuckfor harbor freightlathe would be perfect with exquisite workmanship and it is stable.

Most customers quickly discovered that the chuck can be made to fit pretty much any lathe. However, this chuck is supplied as a bare chuck and a mounting/backing plate needs to be made to fit the appropriate attachment machine. Further, they strongly agree that the chuck fits harbor freight 7x10. To add to that, it is easy to install and works very well.

Top Customer Quotes:

Grease must be emptied out from the threaded holes of the chuck before mounting.
Mode name: k12 series 4-jaw self-centering chuck.
It is sturdy and it has a stable performance.
Been looking for a 4 jaw and decided to go with this chuck.

Best For Very High Quality: Aogbra 4 Jaw Chuck For Harbor Freight Lathe

Buy on Amazon

Best part: Aogbra 4 Jaw Chuck For Harbor Freight Lathe costs comparatively low and it is available to ship in 24 hours. The aogbra 4 jaw chuck for harbor freight lathe is made for wide application and it is good for very high quality. This complete lathe chuck set includes the aogbra chuck, 5 jaw sets and necessary installation tools, and a woodworm screw to provide ultimate flexibility to your projects. The chuck body and bearings are made of high - quality, high - performance steel that is precisely machined to industry standards.

Most importantly, the aogbra 4 jaw chuck for harbor freight lathe is best for high quality and it is much more.

Almost all buyers agree that the chuck has a 1 inch x 8tpi shaft it should. Also, they say that the chuck is of excellent quality and workmanship. Further, they strongly agree that this chuck fits directly to the 1 " - 8 spindle thread. To sum up, at the price, they believe that they got a steal of a deal with it.

Why We Like This:

This chuck set has numerous applications for your shop.
This comes with a complete accessory set and it can be trusted for premium quality.
New and hot releases.

Best For Smooth Action: Senduo 4 Jaw Chuck For Harbor Freight Lathe

Buy on Amazon

The best part: Senduo 4 Jaw Chuck For Harbor Freight Lathe costs comparatively low and it is available to ship in 24 hours. The senduo 4 jaw chuck for harbor freight lathe is ideal for high performance and it is made for a perfect fit. durable wood lathe chuck and has a long service life. The self - centering improves the flexibility of the chuck, can clamp most shaped workpieces.

The chuck is best for high quality and it comes with free accessories. Lastly, the senduo 4 jaw chuck for harborfreight lathe is sturdy and it is perfect for high performance jaws.

Almost all customers quickly discovered that the chuck is great with jet 1015 mini lathe. Moreover, a few say that the chuck is so well balanced that vibration is at a minimum. Also, they also found that the other set of chuck blades would come in very useful.

Top Customer Quotes:

It can help you better install the chuck to the wood lathe chuck.
Manufacturer says: we provide a set of installation tools for free.
This fits perfectly. I hope this information helps someone.
This is great for smooth action and it runs well.

Best For Lifetime Warranty: Phukimlong 4 Jaw Chuck For Harbor Freight Lathe

Buy on Amazon

Next on the list, we've got yet another chuck that manages to win our hearts. It's the Phukimlong 4 Jaw Chuck For Harbor Freight Lathe and it's widely considered as one of the most convenient chucks you can buy. The phukimlong 4jaw chuck forharbor freight lathe is used for machine tools and accessories for general lathes and industrial machines. 2.75 inch chuck body,, tightening gear key, t-allen wrench, screw chuck, free automatic spring-loaded center punch. And, the chuck is best for good finish and it is designed for smooth operation.

The chuck quality is good and it works well. Lastly, the phukimlong 4 jawchuck for harbor freightlathe works perfectly and it is inexpensive.

Most customers agree that the chuck is great for bowls or outboard turning. And, a few also found that the chuck fits Laguna 1216 revo lathe. Overall, at the price, they believe that they got a steal of a deal with it.

Top Customer Quotes:

First impressions, it's a heavy - duty, well - made chuck.
This can be used as bowl support, leaves a lot to be desired.
This is perfectly, fit as it should.
This is best for good fit and it is good for lifetime warranty.

Best For Various Applications: Tenfer 4 Jaw Chuck For Harbor Freight Lathe

Buy on Amazon

We would, of course, be remiss if we didn't mention Tenfer 4 Jaw Chuck For Harbor Freight Lathe for daily use. The tenfer 4 jaw chuckfor harbor freight lathe smooth to adjustt, is built with a full steel chuck body and it is used for various applications. This chuck set is for woodturning when you are making bowls and spigots, The chuck has superior gripping force that holde work piece while it rotates steadily. And, this is compatible with lathes that use a 1”x 8 tpi thread.

Lastly, the tenfer 4 jaw chuck for harbor freight lathe can handle various shaped blocks.

Most customers agree that the chuck is easy to use and great value. And, a few strongly agree that the chuck is easy to install, fit squarely and precision machined, so any give or wobble is totally non-existent.

Why We Like This:

Four jaw self centering chuck to hold round and square stock.
I need a 4 inch wooden lathe chuck for a 1” x 8tpi lathe.
The jaw tightening key allows you to conveniently operate the gripping.
It is easy to install and use.

Best With Center Hole: Accusize Industrial Tools 4 Jaw Chuck For Harbor Freight Lathe

Buy on Amazon

The Accusize Industrial Tools 4 Jaw Chuck For Harbor Freight Lathe is suitable and reliable and fits well with your daily purpose. Make sure this fits by entering your model number. Moreover, the chuck is great for high quality and it is great with a center hole. To sum up, with a 3.9 rating and more than 264 buyers, the accusize industrial tools 4 jaw chuck for harbor freight lathe stands as the best choice.

One customer says - "Or you can make a back plate for this chuck on your lathe. ". A few say that the chuck has a set of inside jaws and a set of outside jaws.

Why We Like This:

Two sets of jaws: outside & inside, all jaws are hardened.
Good investment for the long term.

Best For High Performance Jaws: Pnbo 4 Jaw Chuck For Harbor Freight Lathe

Buy on Amazon

The Pnbo 4 Jaw Chuck For Harbor Freight Lathe might be a relatively new release, but it's still nothing short of impressive this year, thanks to multiple price cuts and added new features over the past few iterations. The pnbo 4 jaw chuck for harbor freight lathe can withstand high-intensity work without damage. The manufacturer says: We will provide you with a set of installation tools. The well - designed chuck body is made of high - quality iron.

The chuck offered with free accessories, is sturdy and it is designed for high performance jaws. Most importantly, the pnbo 4 jaw chuck for harbor freight lathe will greatly extend the service life of the chuck.

Customers say that getting a lathe mounting plate, along with chuck is useful.

Why We Like This:

This is built for high performance and it is applicable.
【Applicable workpiece size】：internal jaw clamping range: 0.47-2.2inch (12-55mm). External jaw clamping range: 0.74-5.1inch (19-130mm).
These can help you better install the chuck on the lathe.
This improves chuck flexibility, clamping most shaped workpieces can also be realized.