The 8 Best 4 Pin Male fan Connectors (2023 reviews)

The features department is where dzs elec 4 pin male fan connector truly manages to shine. When needing to install more than one fan on a computer that is not custom built this piece of hardware is essential. It can be used for a motherboard 4pin interface powering for multiple cooling fans and pwm speed control, lengthen and extend the motherboard 4-pin interface. It has 1 master slot and 2 potential fan slaves. The cable fits perfectly on the male pins on the motherboard. They will all run at the same speed so you'll want the fans to be the same ideally.

It's a plug-and-play splitter, nothing extra requires amazing quality too. It has only one connector with a yellow rpm speed/tachometer line.

Why We Like This:

Strong cable 4 pins and easy to work with
Good quality and the proper number of pins on the fan side
New and hot release

Best For multi fan setups: Teamprofitcom 4 Pin Male fan Connector

Buy on Amazon

The teamprofitcom 4 pin male fan connector is specially designed for your daily usage and has all useful features. This is a perfect solution for motherboard limits. It has 4 pins on one and the other two have three pins. The cables are high quality with a nice look/feel to it. It can be used on a h500m master case for the 2 front 200mm argb fans. The pin spacing makes it so that 3 pin fans can use 4 pin connectors with no issue. These are well made and sturdy yet flexible. The wires feel high enough quality, but are nothing special.

Why We Like This:

Plain old serial wire with a sleeve
You can even control the speed with voltage
Good material, helps cable manage and frees up header space
Makes adding more fans too your case easier

Best For powering AIO: Crj electronics 4 Pin Male fan Connector

Buy on Amazon

The crj electronics 4 pin male fan connector gives the top-tier connector a run for their money by offering flagship specs at a much more affordable price. It is perfect for upgrading to 120mm fans on any gpu. It is just a basic 4 pin Y cable with pin 3 (speed sensor from fan) connected to one fan only. It works with a gtx 1060 and pump and noctua pwn fan. With a custom fan curve the card is virtually silent until hitting the heaviest gaming loads. The plug fits and connects both the new fans, and they work perfectly.

It is perfect for water cooling your gpu with an aio using a mounting bracket like the g. This connector goes directly to the gpu, the Temps are read from the card through the pcie to the board and not from the fan connectors. It is compatible with most modern graphics cards.

Why We Like This:

Plugs in to the gpu fan connector and works perfectly
Must have for vga cooling mods
Great adapter, works with a gtx 1060 and pump and noctua pwn fan

Best For Amp: Modtek 4 Pin Male fan Connector

Buy on Amazon

Modtek offers a variety of connector for personal choice and yet maintaining quality in all the variants. If you just want to attach multiple fans without any speed control this is the thing to use. This is meant for a standard 3-pin fan header. It has a yellow rpm speed / tachometer wire. It makes cabling easier, and makes your case tidier. It has a bradied cable and works. It is best for when you want that extra fan.

This is a great well made and thoroughly protected product. It has great length, gives you just enough. It is nicely built and does what a fan splitter is made to do.

Why We Like This:

Splits just great, all fans ran smoothly
Reliable with all hardware and applications
Well made, no flimsy loose connections

Best For replacement tiny whoop pigtails: Yp 4 Pin Male fan Connector

Buy on Amazon

If you often find yourself confused about convenient and suitable connector, yp 4 pin male fan connector should be your first option for buying. If you are looking for connectors for the 2 pin connectors on an FMS FCX24 RC truck, this is what you need. It can be used in mini rc helicopter,led strips,electrical appliances, automobiles, robots, lighting, toys, batteries etc. The fact that there are both male and female is nice, because you can make quick disconnects, daisychain, or whatever you need.

These are excellent connectors, the wires are very small so be very careful when stripping. The lock mechanism works well for gentle handling. It's possible to swap the colors, but it's extra work, and a bit difficult/risky due to the tiny size, so it's better if you can find the type that you actually need. If you're looking for low-current matched pigtail sets, these may do the job.

Why We Like This:

Perfect size for ho scale train connections
Great for 2 pin ports on fms fcx24 esc
Great quality 2 pin micro connectors for micro and nano sized aircrafts

Best For larger enclosures: novonest 4 Pin Male fan Connector

Buy on Amazon

We know from years of feedback from readers, customers and amazon sellers, what most people want in a convenient and appropriate connector. The novonest 4 pin male fan connector is exactly that - it's a simple connector that hits all the right notes. It is compatible with asus, msi, gigabyte and asrock addressable rgb motherboards. It is a female connector with double sided male adapters. It works, easy to use, and has good cable length. The ergonomic design of the extension cord provides you with greater flexibility and is very convenient to use. It allows users to extend and connect addressable rgb led strips or fans, etc. The cable is firmly sleeved and wrapped to provide long. It is perfect for larger enclosures and no need to buy other motherboards, which saves money and space. The cable comes with male adapters to allow the cable to be used on female and female connections.

Why We Like This:

Lasting performance and avoid dust and breakage
Worked for the cpu cooler and rear case fan
Good brand reputation

Best For controlling deepcool AIO liquid cooler With Icue app: Airgoo 4 Pin Male fan Connector

Buy on Amazon

Compared with other connector in this category, the airgoo 4 pin male fan connector has a convenient design. This adapter works perfectly for adapting 5v argb corsair controllers to more common and standard 4-pin connectors, but be aware of your controller. It is used for a corsair elite capellix to some 5v 3pin argb devices. It is three cooler master mf120 halo 3in1 duo-ring argb with 24 independently leds. It allows the connection of the power, ground, and data pins to a regular 2811 3-pin led strip.

This 4 pin adaptor cable set allows you to hook up any 5volt, 3 pin, ARGB fans to the Corsair Lighting Node or the Corsair Commander Core XT controllers. It works for controlling deepcool aio liquid cooler with the icue app. It has a lot of RGBs on it already, but of course you can never have too much drip on your rig. It is a great solution to partially bypass the corsair lockdown without rewiring.

Why We Like This:

Adapts corsair lighting node core for use with led strips
60 cm/23.6in, enough long for easy installation and keep tidy
Allows you to use standard argb fans and strips with corsair elite capellix aios

Best Easy To Use: Elechawk 4 Pin Male fan Connector

Buy on Amazon

The elechawk 4 pin male fan connector is suitable and reliable and fits well with your daily purpose. This kit allows you to do a number of different connectors from two up to 8 so it is handy to have on hand if you do a lot of low voltage and current dc work. It includes a female and male ph2.0mm 2/3/4/5/6 pin connector, 90pcs pre-crimped wire, heat shrinkable tube and 1pcs tweezers. The friction of the pin connection holds them tight. It would take quite a bit of vibration or tension to separate them accidentally.

Compared to manually crimping connectors, these are a huge time saver. It is used for circuit boards, lipo battery, balance lead, circuit boards, speakers, monitors, household appliances, led lighting, copiers, fax machines, medical equipment, computers, electronic toys. These are all the same size and only work with the wire in the kit.

Why We Like This: