We consider a 40 chain clutch to be a worthy investment in the long run. Let’s take you step by step, type by type, and find the best 40 chain clutch for you.

Our review process: Show/Hide

Our Top Picks:

Best Overall: Buy: Lotfancy 40 Chain Clutch READ REVIEW

Best For Heavy Duty: Buy: Fdj New Clutch READ REVIEW

Best For Great Price: Buy: Bravex 40 Chain Clutch READ REVIEW

Best For Worth The Money: Buy: Trkimal 40 Chain Clutch READ REVIEW

Best With Great Service: Buy: Acpulse 40 Chain Clutch READ REVIEW

Best For Replacement: Buy: Sunroad 40 Chain Clutch READ REVIEW

Best For Maximum Torque: Buy: Kioipo 40 Chain Clutch READ REVIEW

Best For Complete Set: Buy: Fdj 40 Chain Clutch READ REVIEW

Best For Fast Heat Dissipation: Buy: Outd 40 Chain Clutch READ REVIEW

Best For Small Engine: Buy: Mojtbe 40 Chain Clutch READ REVIEW

Best Overall: Lotfancy 40 Chain Clutch

Buy on Amazon

We are personally inclined towards Lotfancy 40 Chain Clutch, It is not so pricy, but it overachieves its purpose and is outstanding in important aspects. The lotfancy 40 chain clutch is also a perfect replacement part for many small utility 163cc 5.5 hp and 196cc 6.5 hp engines. A kit if the chain gets kinky from lack of oil it should be replaced before it damages the clutch sprocket. Either of these methods will result in the clutch slipping, which is self-destructive.

The clutch is reasonable and it allows for a great deal. Also, this can only be used on a kart by children under 10 years old and at speeds below 30 yards. Most importantly, the lotfancy 40 chain clutch is extremely important to add to that it is to extend the rear sprocket diameter.

Almost all buyers agree that the clutch will fit a #41 40 420 roller chain. Also, a few also found that the clutch will not remain intact under the loads that this clutch will transfer. Also, they strongly agree that the clutch is compatible with 2-6.5hp honda and honda cloned engines gc160, gc190, gx120, gx140, gx160, gx200 briggs and Stratton and 2-6.5 hp with 3/4” shaft tecumseh engines. To sum up, the tone of buyers is very positive and we believe that the clutch suits the purpose.

• Before ordering, please check your crankshaft size.
• This includes a 1 x go kart clutch.
• This will last longer and apply more torque to the wheel.
• This is for for 40 41 420 chain 6.5hp only.

Best For Heavy Duty: Fdj New Clutch

Buy on Amazon

The Fdj New Clutch's superior materials make sure that it ages well with use. The fdj new clutch is used for a number of teeth, is perfect for high performance and it works well for good quality. If heat damage occurs, the clutch will never disengage and the machine will start taking off by itself as soon as you start the engine. In addition, the clutch can be recommended for good performance, fits well and it works fine.

The clutch is good for fast delivery, is great for amazing quality, It fits right for the right size and has an excellent design. Also, the clutch has 35 chains and it is good so far. Above all, the fdj new clutch has a lock washer, it feels quality and has an original design.

Almost all buyers found that the clutch will handle your problems and any wear and taste. Further, they also found that the clutch will get really hot and wear out much faster. Moreover, a few say that this means for every tooth on the clutch there are six teeth on the rear sprocket. Overall, many customers have used the FDJ new clutch for more than a few months without any complaints, and it shows no sign of giving up.

• This worked perfectly. is great for short stop, it fits perfectly and has a perfect design.
• This will likely slip with all the extra torque.
• This fits engines with a 5/8 inch (.625 inch) output shaft with a standard keyway.
• Heavy duty 10t sprocket for 40/41/420 chain 212cc predator belt drive centrifugal clutch.

Best For Great Price: Bravex 40 Chain Clutch

Buy on Amazon

We would, of course, be remiss if we didn't mention Bravex 40 Chain Clutch for daily usage. The BRAVEX 40 chain clutch works great and it works perfectly. Make sure this fits by entering your model number. In addition, this provides great value and it works on preditor.

Most importantly, the bravex 40 chain clutch pulls hard and it is great for a great price.

Most buyers quickly discovered that the clutch is a 3/4 inch crank shaft then yes. In addition, a few strongly agree that the clutch is great for 69370 predator 212cc. Further, a few say that this is the replacement clutch for the Coleman cu200 mini bike with a 3/4 ” engine shaft. Consequently, customers were very happy to recommend it to friends and families.

• Super grade high impact/wear resistant steel, 50% longer lifetime.
• This is for two different sized chains.
• For motors no more than 200 cc only, screws and chains are not included.
• This comes with a set of screws, That’s all you will need.

Best For Worth The Money: Trkimal 40 Chain Clutch

Buy on Amazon

We would, of course, be remiss if we didn't mention Trkimal 40 Chain Clutch for daily purpose. The trkimal 40 chain clutch can be used on the crankshaft to space clutch. Make sure this fits by entering your model number. In addition, it worked perfectly and it shipped great.

The clutch can be of good quality and it is worth the money. Most importantly, the trkimal 40 chain clutch is a perfect fit for go kart minibike baja mini bike mb165 & mb200 and genrator.

Most customers found that the clutch can be used on a 5hp go kart, working great so far. Moreover, a few also found that the clutch can be used on the crankshaft to space clutch. In addition, they strongly agree that this clutch has a brass bushing inside, not a roller bearing. In conclusion, the tone of buyers is very positive and we believe that the clutch suits the purpose.

• This is easy to install and pulls well on a mini bike.
• This is designed for easy installing and it works as described.
• Set screws and chains are not included.
• This is common, allows for a great fit and it works perfectly.

Best With Great Service: Acpulse 40 Chain Clutch

Buy on Amazon

Next on the list, we've got yet another clutch that manages to win our hearts. It's the Acpulse 40 Chain Clutch and it's widely considered as one of the most convenient clutches you can buy. The acpulse 40 chainclutch can do for customer service, comes with terrific customer service and it fits perfectly. common clutch for 3.5-6.5 hp engines, mounted onto the crankshaft using a bolt and washer on the end of the crankshaft. And, it is inexpensive and it goes smoothly.

The clutch is made with great service and it can be bought for good value. Moreover, it installed easily and it is brand new. Above all, the acpulse 40chain clutch is compatible with 2-6.5hp honda and honda cloned engines gc160, gc190, gx120, gx140, gx160, gx200 briggs and Stratton and 2-6.5 hp with 3/4” shaft tecumseh engines.

One customer says - "Easy to install if you are a proficient mini bike rider. ". Almost all customers opine that the clutch works well and can’t beat the price. Overall, many customers have used the acpulse 40 chain clutch for more than a few months without any problems, and it shows no sign of giving up.

• This is common and it works for part number.
• This is compatible with both the mb165 and the newer mb200 models.
• Centrifugal clutch 10 tooth, 3/4" bore, #40/41/420 chain with 3/16 key built in.
• This worked perfectly and it made for a good replacement.

Best For Replacement: Sunroad 40 Chain Clutch

Buy on Amazon

The features department is where the sunroad 's 40 chain clutch truly manages to shine. The Sunroad 40 Chain Clutch is bolted right up and it works as described. Make sure this fits by entering your model number. Also, it is made of high quality iron material, which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation.

The clutch worked perfectly, is great for high quality material and it is brand new. Also, it is reliable and it can be trusted for good quality. Above all, the sunroad 40 chain clutch is produced by sophisticated technology.

Almost all customers agree that the clutch is great for a cheap go-kart. In addition, a few also found that the clutch is a great job guys. Moreover, they strongly agree that the clutch works well with proper gearing. With no doubts, this clutch passed the test and had very satisfied buyers eager to share their experience.

• Replacement for go kart and mini bike,lawnmower.
• Package included:1 x centrifugal clutch and 1 x #40/41/420 chain.
• This fits predator 212 and comes with a chain link.
• Otherwise, it would endanger yourself, your friends or family.

Best For Maximum Torque: Kioipo 40 Chain Clutch

Buy on Amazon

If you often find yourself scrambling for an appropriate and satisfactory clutch, Kioipo 40 Chain Clutch is your end point. Further, the kind of dry clutch is unnecessary to be oiled, or the temperature of the surface will be easy to rise. That also makes the clutch easy to smoke during working. Make sure this fits by entering your model number. Lastly, the kioipo 40 chainclutch can be used on go kart clutch, mini bikes.

Almost all customers opine that the clutch is pretty straight forward. To add to that, it is a clutch with a 1 1/4 inch shaft. Further, a few strongly agree that this part will only work with a # 40 or # 41 chain.

• 🌛A high quality and professional clutch. Engaging speed up to 2300 rpm.
• Replace the old broken 1inch bore clutch 41 chain.
• This clutch is intended for a 1" straight crankshaft.

Best For Complete Set: Fdj 40 Chain Clutch

Buy on Amazon

Best part: Fdj 40 Chain Clutch costs comparatively little and it is available to ship in 24 hours. The fdj 40chain clutch is fitment and it is comparable to stock. For a heavy - duty mini bike clutch, 3 4 inch 10 tooth go cart clutch with #40 chain assembly is an excellent choice for go-karts and mini bikes, especially for the daily garage mechanic. The clutch onto the crankshaft using a bolt and a washer on the end of the crankshaft, easy to operate within minutes.

Finally, the fdj 40 chain clutch fits honda gx160, gx200, gx 140, gx120, gc160, gc190, harbor freight greyhound 196cc, harbor freight predator 212cc, for Briggs and Stratton tecumseh engines 2-6.5 hp with a 3/4" shaft.

Almost all buyers opine that the clutch is great for a predator 212cc on a kart. In conclusion, most buyers agree that the clutch suits best, and no one questions it.

• This is great for hassle-free return and it looks well made.
• Lot of satisfied buyers.

Best For Fast Heat Dissipation: Outd 40 Chain Clutch

Buy on Amazon

The Outd 40 Chain Clutch is capable of outshining several other clutches featured in this list in overall features in its price range. The outd 40 chain clutch is made of high quality iron material, lightweight, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation, very popular in the kart /buggy market. The Manufacturer says: We offer you a three - month warranty, you can buy it with confidence. The 1 " bore allows this clutch to work with gas engines larger than 6.5 hp.

Most importantly, the outd 40 chain clutch is designed for 6.5hp 212cc engines, fit for go kart and mini bike, lawnmower.

• We offer you a three - month warranty, you can buy it with confidence.
• This is designed to be able to move a certain amount of weight.
• Centrifugal clutch 1" bore 14 teeth for 40-41-420 roller chain(chain not included).

Best For Small Engine: Mojtbe 40 Chain Clutch

Buy on Amazon

Mojtbe line of clutches comes in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. The Mojtbe 40 Chain Clutch is designed for 6.5hp 212cc engines，for 40, 41, or 420 series chain. Make sure this fits by entering your model number. Moreover, the clutch fits 2-6.5hp engines, and go karts with wheels of 15" or under.

Lastly, the mojtbe 40 chain clutch is a high quality, centrifugal clutch that is suitable for numerous mini bike and go kart applications.

Most customers quickly discovered that the clutch is great for a predictor 79cc engine.

• Good brand reputation.
• Delivers what they promise.