The 10 Best 400 M Intake Manifolds (2022 reviews)

The look and feel of these manifolds are consistent with the high quality we're used to from the rest of Edelbrock's lineup. The Edelbrock 400 M Intake Manifold is for vortec heads and it comes with vacuum ports. Make sure this fits by entering your model number. The edelbrock performer intake manifold delivers superior performance with square - bore carburetors.

Above all, the edelbrock 400 m intake manifold is real, comes with quality gaskets and it allows for a great deal.

Almost all customers quickly discovered that the manifold making one that will make this one is for sbc. In addition, they say that the manifold is a perfect fit on 85 chevy c10 with a 305. Also, a few also found that the heads curved up close to the valve covers the seat.

Customers say that getting a 400 small block intake manifold, along with manifold is useful.

Top Customer Quotes:

These make intakes for boats plus, if it are a sbc 307.
This works well with installation instructions, it allows for a great look and has injection style.
This is designed for the chevy 305 and 350 engines.
This fits older pre 1986 blocks.

Best With Part Number: Gm 400 M Intake Manifold

Buy on Amazon

The Gm 400 M Intake Manifold gives the top-tier manifolds a run for their money by offering flagship specs at a much more affordable price. The gm 400 m intake manifold is super easy and its price is good. Recommended replacement part for your gm vehicle's original factory component. In addition, it comes with an amazing price, fits well and it works well for good quality.

The manifold is great for a great price, it fits perfectly and has a product design. Further, it allows for easy install and it is great for the right hand. Above all, the gm 400 m intake manifold is brand new and it comes with great part.

Almost all buyers opine that the manifold comes with seals installed and fits 1.4 l chevrolet engines. Further, they say that the manifold is for a 2013 chevy cruze 1.4. Moreover, a few say that the manifold is easy to install, fits perfectly and fixes problems. To sum up, most buyers agree that the manifold suits best, and no one questions it.

Top Customer Quotes:

This fixed the problem and it is limited.
This is great for engine light and it is great for engine codes.
This will only fit only Chevrolet and buick.
The tube that crosses over from the intake manifold to the turbo.

Best For Great Quality: Atp Automotive 400 M Intake Manifold

Buy on Amazon

The Atp Automotive 400 M Intake Manifold might be a relatively new release, but it's still nothing short of impressive this year, thanks to multiple price cuts and added new features over the past few months. The atp automotive 400 m intake manifold is used for heavy duty, It sounds great and has a cool design. Make sure this fits by entering your model number. Also, the manifold worked fine, worked perfectly and it is highly recommend.

Above all, the atp automotive 400 m intake manifold is present and has an intake style.

Almost all customers quickly discovered that the manifold does appear to be a very high quality part. Further, a few also found that the manifold came with the kit and could be easily overlooked. Moreover, a few say that the manifold is the replacement part that will permanently fix those issues. In short, buyers found this to be one of the best manifold for daily purposes.

Top Customer Quotes:

This is the best choice for 3.8 monte ss.
This is superior to the Dorman equivalent part.
Structurally molded with specified reinforcement ribs.
This is great for FWD vehicles with 3800 series ii engines.

Best For Low Quality: Mostplus 400 M Intake Manifold

Buy on Amazon

The Mostplus 400 M Intake Manifold's superior materials make sure that it ages well with use. The mostplus 400 m intake manifold allows for excellent performance and it fits great. Make sure this fits by entering your model number. The intake manifold supplies air to the cylinders of an engine.

The manifold is good for low quality and it fits right. Most importantly, the mostplus 400 mintake manifold is compatible with 3.0l and 3.5l, not compatible with 3.2l.

Most buyers agree that the manifold is perfect fit and function, an excellent value for 2010 ml350. In addition, they say that the manifold fits exctly to the engine and the new manifold. Moreover, they also found that the manifold had been installed and was working great. In conclusion, for almost all customers, it was what they were looking for.

Top Customer Quotes:

This is made of plastic and tends to break.
【Oem part number】—2721402101, 2721402201, 2721402401, a2721402401.
This comes with the mercedes/pierburg stamped components.
This comes with no gasket and also has self - tapping screws.

Best With Power Band: Southwest Speed 400 M Intake Manifold

Buy on Amazon

Compared with other manifolds in this category, the Southwest Speed 400 M Intake Manifold has a convenient design. The southwest speed 400 m intake manifold is part of the weiand nostalgia series of intake manifolds. The manufacturer says: We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. These minor blemishes are a natural part of the casting process when using the original sand casting tooling.

Lastly, the southwest speed 400m intakemanifold is used for front height and it is great for fuel system type.

Why We Like This:

This is brand new and it comes with a power band.
Brand new weiand action +plus intake manifold. Produced by Holley performance products (part #8010).
New and hot releases.

Best For Engine Light: Kipa 400 M Intake Manifold

Buy on Amazon

The features department is where the Kipa 400 M Intake Manifold truly manages to shine. The kipa 400 m intake manifold has important tips and has product design. Make sure this fits by entering your model number. The plastic material used in the construction of the intake manifold is the main problem.

The manifold is great for engine light, it is designed for top quality and has a sturdy design. And, the manifold can cause loss of power and it fits perfectly. Most importantly, the kipa 400 m intake manifold is always used for the intake manifold of part number 2721402401, 2721402201.

"Product arrived on time. " - says, one customer. Obviously, this product passed the test and had very satisfied buyers eager to share their experience.

Customers discovered that getting a flap intake manifold, along with manifold is useful.

Why We Like This:

The Manufacturer says: Our new aluminum improved design will never break again.
The Manufacturer says: our premium repair kit is the only solution that solves all issues.
Replace for mercedes-benz m272 v6 & m273 v8 series engines intake manifold.
This is made from sturdy, tough prime materials that provide enhanced durability and superior reliability.

Best With Popular Aftermarket Square Bore: Jegs 400 M Intake Manifold

Buy on Amazon

We know from years of feedback from readers, amazon sellers, and family and friends what most people want in a convenient and appropriate manifold. The Jegs 400 mintake manifold is exactly that - it's a simple manifold that hits all the right notes. The Jegs 400 M Intake Manifold improved performance, It fits well and it is great with a power band. Make sure this fits by entering your model number. Further, the manifold fitted Gm and Chevrolet cylinder heads from 1955 through 1986.

The manifold fit with popular aftermarket square bore 4150 carburetors including Edelbrock, holley, quickfuel, proform, and more. Above all, the jegs 400m intakemanifold looks awesome and it comes with an adapter plate.

One customer says - "Definitely increased throttle response and upped the hp. ". Almost all buyers quickly discovered that the manifold is cheaper than some of the Chinese crap. It turns out it is a very nice cast, neat and clean.

Why We Like This:

Fabricated from cast aluminum for weight savings and improved performance.
This provides great value and it is longest.
Idle to 5500 rpm power band for street or mild race applications.

Best For Air Flow: Acdelco 400 M Intake Manifold

Buy on Amazon

Next on the list, we've got yet another manifold that manages to win our hearts. It's the Acdelco 400 M Intake Manifold and it's widely considered as one of the most convenient manifolds you can buy. The acdelco 400 m intake manifold is manufactured to gm oe specification for fit, form, and function. These original equipment intake manifolds have been manufactured to fit your gm vehicle, providing the same performance, durability, and service life you expect from general motors. And, it is designed for air flow, provides great value and it looks good. Above all, the acdelco 400 m intake manifold can be purchased for a throttle body adapter and it is used for excellent fit.

Almost all buyers quickly discovered that the manifold will but some throttle bodies are different, but they make an adapter at Texas speed, you need to adapt it. I hope this helped. In addition, they strongly agree that the manifold will work with the vortec 4.8, 5.3, or 6.0.

Customers discovered that getting a l intake manifold bolt, with this manifold made their life much easier.

Top Customer Quotes:

Recommended replacement part for your gm vehicle’s original factory component.
This is a great option for intakes on a budget.
One of the newcomers and featured product.

Best For Torque: Top10 Racing 400 M Intake Manifold

Buy on Amazon

Top10 Racing offers a variety of manifold for personal choice and yet maintains quality in all the variants. And, it is fitted for the throttle body and it comes with installation instructions. Make sure this fits by entering your model number. Above all, the Top10 Racing 400 M Intake Manifold can do for customer service and it looks great.

Almost all buyers opine that the manifold will bolt to a cathedral port head. And, they strongly agree that the manifold does include fuel rails and will fit on an lq9 engine. Further, they say that the manifold can, however the injector spacing may vary depending on the injector length you are using.

Few customers bought intake manifold temp sensor, along with the manifold.

Top Customer Quotes:

Compatible for cathedral port ls1/ls2/ls6 heads.
This will fit any engine with cathedral port heads.
Hardware - 3mm (1/8") thick t6061 sheet aluminum construction.
Durability - the intake will not bend or flex with boost or vacuum.

Best For Boost: Dimaier 400 M Intake Manifold

Buy on Amazon

The Dimaier 400 M Intake Manifold is capable of outshining several other manifolds featured in this list in overall features in its price range. The dimaier 400 m intake manifold is compatible with cathedral port ls ls1/ls2/ls6 (6.0l 5.6l 5.3l 4.8l) heads. Make sure this fits by entering your model number. Furthermore, it is made of 3mm (1/8 inch ) thick t6061 sheet aluminum. Lastly, the dimaier 400 m intake manifold will not bend or flex with boost or vacuum.

Almost all buyers opine that the manifold includes yes, the throttle body. Also, a few also found that the manifold is suitable for certain models of Chevy 5.3.

Why We Like This:

New and hot releases.
Lot of satisfied buyers.