The 12 Best Adafruit Breakout Boards (2022 reviews)

The Adafruit Breakout Board is the most long-standing product on the market today. The adafruit breakout board is made with a micro usb cable, is sturdy and it is very compact. The Manufacturer says: We use a micro-b connector with through-hole shielding pads for an excellent strong connection. Further, the board is simple but effective, it feels sturdy and has a good design.

Above all, the adafruit breakout board is built with quality materials, is very sturdy, it is for heavy duty and has a simple design.

Most customers quickly discovered that the board is typical adafruit quality, it's very well made and the micro-b socket is solidly attached. And, a few strongly agree that the board allows much more than 12 volts. Without any doubt, this product passed the test and had very satisfied buyers eager to share their experience.

Why We Like This:

This has a usb micro-b connector, with all 5 pins broken out.
This is effective, it has get this one and has a nice design.
Good investment for the long term.

Best For Frequency Range: Adafruit Breakout Board

Buy on Amazon

The Adafruit Breakout Board's material feels more premium than its price would suggest. The adafruit breakout board is very good and has a hardware design. The manufacturer says: We also put level shifting circuitry on the i2c lines so you can use this chip safely with 3v or 5v logic. Moreover, it is programmable, it is great little and has a great design.

The board is made for frequency range, has example code, it is optional and has a very good design. And, it is capable, it is very neat and has a good design. Finally, the adafruit breakout board is neat and has a neat design.

Most customers opine that the board works well as expected and would highly recommend it. Moreover, they also found that the board features fruit and it is great for general clocking purposes.

Top Customer Quotes:

This can be used in several qrss devices which require good frequency stability.
This is easy to program with the arduino for exact frequencies of all three channels.
By setting up the pll and dividers you can create precise and arbitrary frequencies.
Three independent outputs, each one can have a different frequency.

Best For Real Time Clock: Adafruit Breakout Board

Buy on Amazon

The Adafruit Breakout Board should be able to handle its purpose and duties with ease. The adafruit breakout board is perfect for high accuracy, keeps time well and it worked fine. Plugs into any breadboard, or you can use wires. In addition, it is simple and inexpensive but not a highly precision device.

The board is perfect for data logging, clock-building, time stamping, timers, alarms, and more. Finally, the adafruit breakout board is reliable and important.

Almost all buyers agree that the board is the perfect addition to a pi that must keep track of time without a constant internet connection. To sum up, most buyers agree that the board suits them best, and no one questions it.

Why We Like This:

This includes pcb & header and will keep time for 5 years or more.
New and hot releases.

Best With Power Supply: Adafruit Breakout Board

Buy on Amazon

The Adafruit Breakout Board's high-end materials make sure that it ages well with use. The adafruitbreakout board works as described, worked fine and it allows for fast response. There's two digital inputs per h-bridge (one for each half of the bridge) as well as a PWM input per driver so you can control motor speed. These are perhaps better known as "the drivers in the assembled adafruit motorshield or motor hat.

Above all, the adafruit breakout board do handle a peak of 3a, but that's just for a short amount of time.

Most customers agree that the board works very well with the tb6612 and this module. And, they strongly agree that the board will drive most small nema 17 face stepper motors. And, they strongly agree that the board is perfect for latching water solenoids. Overall, buyers found this to be one of the best boards for daily purposes.

Why We Like This:

This is good for motor voltages from 4.5v up to 13.5v.
It is straight and it looks good.
It runs at 2.7v-5v logic. The motor & logic voltage are separate.
This is separate from the logic voltage.

Best With Switch: Adafruit Driver Board

Buy on Amazon

The Adafruit Driver Board might be a relatively new release, but it's still nothing short of impressive this year, thanks to multiple price cuts and added new features over the past few months. The adafruit driver board works well for logic level and it is super easy. You can set the current limit with a removable external resistor. And, it is easy to use with just about any brushed dc motor.

The board is required to attach the header and terminal blocks but it is a simple task that can be done with basic soldering equipment. Most importantly, the adafruit driver board comes with 6.5-45vdc power on mobile and provides the h-bridge input control on in1 and in2.

Most customers think that the board is easy to use driving board. In conclusion, for most customers, Adafruit product was what they were looking for.

Why We Like This:

You can set the current limit with a removable external resistor rlim.
This is used for external power, has thermal shutdown and it is super simple.
Connect your motor to the terminal block.
This is great for small footprint and it is clear.

Best For Easy Solder Points: Adafruit Perfect Little Board

Buy on Amazon

The Adafruit Perfect Little Board should be able to handle its purposes and duties with ease. The adafruit perfect little board works as described, is great for high quality, it is sturdy and has a simple design. The Manufacturer says: We paired a genuine jst connector with a slide switch that can do up to 600ma. Moreover, it worked perfectly, It is made for easy solder points and has a sturdy design. Lastly, the adafruit perfect little board is perfect with all our 1-cell lipoly and liion batteries as well as our 6v coin cell holder and 3xaaa battery pack.

Obviously, this product passed the test and had very satisfied buyers eager to share their experience.

Why We Like This:

The Manufacturer says: we also have simple jst pigtails that mate with this connector.
Delivers what they promise.

Best With Case: Adafruit Breakout Board

Buy on Amazon

The Adafruit Breakout Board should be able to handle its purpose and duties with ease. Make sure this fits by entering your model number. Further, the board is good for about 1.2 amp or less of current, since that's the limit of this chip. To sum up, with a 4.9 rating and more than 136 buyers, the adafruit breakout board stands as the best choice.

As a result, customers were eager to recommend it to friends and families.

Why We Like This:

Built in current limiting up to 1.2amp (or 2 amp for a short time).
That means you can drive two DC motors bi-directionally, or one stepper motor.
Alternative to the tb6612 driver; better for low voltage uses.

Best With Camera: Adafruit Breakout Board

Buy on Amazon

The Adafruit Breakout Board is the most convenient product on the market today. The adafruitbreakout board is made for easy integration, can handle frame rate, It is great for temperature range and has a simple design. When connected to your microcontroller (or raspberry pi) it will return an array of 64 individual infrared temperature readings over i2c. In addition, it can detect a human from a distance of up to 7 meters. Finally, the adafruit breakoutboard is the next generation of 8x8 thermal ir sensors from panasonic, and offers higher performance than it'ssssss predecessor, the amg8831.

Most buyers found that the board is suitable for use in more kinds of projects. And, they also found that the module should n't reach 80c while sitting out in the sun.

Top Customer Quotes:

will use this sensor from panasonic is an 8x8 array of thermal sensors.
So you can use it with any 3v or 5v microcontroller or computer.
Perfect for creating your own human detector or mini thermal camera.
Add heat-vision to your project and with an adafruit amg8833 grid-eye breakout.

Best With Excellent Quality: Adafruit Simple Breakout Board

Buy on Amazon

The Adafruit Simple Breakout Board is satisfactory and appropriate and fits well with your daily purpose. The adafruit simple breakout board is great for pairing with a microcontroller with usb support, or adding usb 5v power to a project. It comes with one fully assembled and tested mini b breakout pcb and a small stick of 0.1" header so you can solder it on and plug into a breadboard. Further, this would be perfect with excellent quality, is sturdy and it is designed to be top notch. Above all, the adafruit simple breakout board is easy to solder, is very handy and it is very sturdy.

In conclusion, most buyers agree that the board is functionally comfortable and no one questions it.

Why We Like This:

Simple breakout board with usb mini-b connector.
Add usb 5v power to any project.
Good investment for the long term.

Best For Data Transfer: Adafruit Breakout Board

Buy on Amazon

The Adafruit Breakout Board is capable of outshining several other products featured in this list in overall features for the price point. Comes fully assembled and tested, pre-programmed with esp32 spi wifi co-processor firmware that you can use in circuitpython to use this into a wifi co-processsor over spi + 2 pins. The firmware on board is a slight variant of the arduino wifinina core, which works great. The board is easy to maintain and use.

Why We Like This:

A breakoutboard that lets you use the powerful esp32 as a wifi co-processor.
Give your plain ol' microcontroller project a lift with the adafruit airlift.
Send basic but powerful socket-based commands over 8mhz SPI for high speed data transfer.

Best For Secure Connection: Adafruit Breakout Board

Buy on Amazon

If you often find yourself confused about appropriate and satisfactory board, this product is your end point. The Adafruit Breakout Board is a 3-axis gyroscope that can measure spin and twist. The Manufacturer says: Four mounting holes make for a secure connection, and we put the popular power+data pins on one side, and the interrupt pins on the other side for a nice & compact breakout. The breakout board version of this sensor has both i2c and spi interfaces. Finally, the adafruit breakout board is a 3-axis magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north.

Why We Like This:

The Manufacturer says: more advanced users can use SPI, Our library has support for both.
Accelerometer: �2/�4/�8/�16 g (no �6 g range).
By combining this data, you can really orient yourself.

Best With Audio: Adafruit Breakout Board

Buy on Amazon

If you often find yourself scrambling for a convenient and suitable board, this product is your end point. The Adafruit Breakout Board comes with a micro SD card itself. Sdio is usually available on higher end chips, and you may need to use a specific pin set. Also, the board is select, is durable and it is used for audio files.

Most importantly, the adafruit breakout board is perfect for microcontroller storage and retrieval.

Why We Like This:

Manufacturer says: you just pick up one of our spi.
It comes with a slight header so you can use it on a breadboard.
For use with 3v power and logic microcontollers only.