The 11 Best Bmw 320 I Brake Fluids (2022 reviews)

The fluid is a must have add-on for your daily use. The Motul Bmw 320 I Brake Fluid comes with a friction modifier, can be trusted for good quality and it is designed for harsh conditions. Needed for extremely high performance polyglycol brake fluid. Also, this is made for good stuff and it has decreased operating temperature.

Lastly, the motul bmw 320 i brake fluid is filled with nitrogen, increasing shelf life and eliminating contamination while factory sealed.

Almost all customers agree that the fluid is great for streets and tracks. Also, a few also found that the fluid is superior to anything else you'll find. In addition, a few strongly agree that the fluid does have a shelf life as the formula has a tendency to adsorb water from the air when not in a sealed system. Obviously, this product passed the test and had very satisfied buyers eager to share their experience.

Customers also found that its wise to buy a recommended brake fluid, along with this fluid.

Top Customer Quotes:

Helping to prevent vapor lock and brake fade during hard use.
This can work for track use and it is extremely high - dry.
This will lead to higher brake temperatures generated while stopping this higher load.
This is perfect in a 2005 ninja 636.

Best For Top Quality: Bosch Bmw 320 I Brake Fluid

Buy on Amazon

Bosch is known for creating pragmatic and minimalist fluid for people on the go, and its line of Bosch Bmw 320 I Brake Fluid definitely falls in line with that reputation. The bosch bmw 320 i brake fluid is used to substitute almost any brake system launched since 1990. Coverage excludes dot 5 silicone based brake fluid which is limited to military and racing applications. Further, the fluid is designed for heavy duty and it is designed for a wide range of use.

Most importantly, the bosch bmw 320 i brake fluid has been subject to intense testing of both system pressure build-up and wear and noise at extreme temperatures.

Almost all customers quickly discovered that the fluid will tell you what power steering fluid, transmission fluid, coolant, brake fluid, & oil your car needs. Also, a few strongly agree that the fluid is compatible with older dot 3 & 4 fluids. Also, a few also found that the fluid will work in anything that specifies dot3 or dot4 brake fluid. Therefore, customers were very happy to recommend it to friends and would-be buyers.

Top Customer Quotes:

This does a good job flushing contaminated fluid out of the brake system.
This is great with great stuff, does the job and it provides great value.
This fluid covers all brake fluid requirements of old and new cars.
This is great as clutch fluid as well.

RELATED: Best Bmw 320 I Engine Coolants

Best With Fast Shipping: Prestone Bmw 320 I Brake Fluid

Buy on Amazon

Not everyone likes to purchase fluid for their daily usage, but the Prestone Bmw 320 I Brake Fluid would be an anomoly. The prestone bmw 320 i brake fluid comes with quick shipping and it has the best price. Mile extended life fluid, formulated to prevent corrosion of all metals within the braking system. This synthetic fluid starts with a higher dry boiling point than the dot minimum standard to protect against overheating, brake fade and performance decline due to water absorption.

The fluid is designed to provide a high margin of boiling point protection. Further, this reduces the possibility of fluid vaporization and eventual brake failure. Finally, the prestone bmw 320 i brake fluid does the job and it allows for a good size package.

Most buyers found that the fluid works well for clutch fluid for c6 corvettes. Moreover, a few also found that the fluid can be used in dot3/4 systems. Also, a few strongly agree that note: if the brake fluid is dot 4 and the specification calls for dot 4, then the brake fluid matches the specification.

Top Customer Quotes:

It provides corrosion protection for all metals within the braking system.
Excellent performance in high-temperature braking systems.
This is perfect for a brake bleed on a ducati and bmw.
Compatible with all conventional brake fluids.

Best For Worth The Cost: Castrol Bmw 320 I Brake Fluid

Buy on Amazon

Compared with other fluids in this category, the Castrol Bmw 320 I Brake Fluid has a convenient design. The castrol bmw 320 i brake fluid is good for track use and it allows for extremely high boiling points. Make sure this fits by entering your model number. And, this is made with great stuff and it thus far. Finally, the castrol bmw 320 i brake fluid is practical, is easy to use and it is well worth the price.

Almost all buyers quickly discovered that the fluid includes tracking in mid-90 degree temperatures on numerous occasions. And, they say that the fluid is easy to tell if the job is done. In addition, a few also found that the fluid could have been used in 2003 bmw m3.

Top Customer Quotes:

This is uncompromising high grade brake fluid from a racing brand.
This is the best break fluid you can use.
The dot 4 is more likely to destroy paint, so be careful.
Superior braking during arduous conditions like racing and rallying.

Best For Great Price: Motul Powersports Bmw 320 I Brake Fluid

Buy on Amazon

We would, of course, be remiss if we didn't mention Motul powersports bmw 320 i brake fluid for daily use. The Motul Powersports Bmw 320 I Brake Fluid should be able to handle its purpose and duties with ease. In conclusion, with a 4.9 rating and more than 2112 buyers, the motul powersports bmw 320 i brake fluid stands as the best choice.

Most customers found that the fluid can be used in an rx-8 that sees lots of autocross and track days. Further, they strongly agree that the fluid is hydrophilic and will lose effectiveness over the years. Overall, for most customers, the fluid was just what they wanted.

Few customers got recommended brake fluid, along with the fluid.

Why We Like This:

Good investment for the long term.
New and hot releases.

Best With All Brands: Crp Automotive Bmw 320 I Brake Fluid

Buy on Amazon

The CRP automotive bmw 320i brake fluid should be able to handle its purpose and duties with ease. The CRP automotive bmw 320 ibrake fluid is compatible with all brands but, due to their superior performance characteristics, all pentosin products perform best when used for a complete system refill vs. top off for other brands. Manufacturer says: We pay great attention to the products we carry, the people we work with, and the way in which we conduct business. These parts address known weaknesses and premature failures of factory parts.

The fluid is made for good stuff, makes for great performance and it is used for motor oil. Above all, the CRP automotive bmw320 i brakefluid is a trusted brand of high-quality new and remanufactured power steering products for the automotive replacement market, with more than 30 years of experience in the category.

Most customers opine that the fluid is compatible with earlier MB fluids. Moreover, they strongly agree that the fluid is great for racing, used with brembo gt calipers on an 01 audi tt. Moreover, a few say that the fluid is a great price for a high quality brake fluid. In short, at the price, they believe that they got a steal of a deal with it.

Top Customer Quotes:

This will fix it with no problems.
This is low viscosity, check your owners manual for compatibility.
This is a must, Professional repair technicians reach for pentosin.
This does the job and it is domestic.

Best For Heavy Duty: Ate Bmw 320 I Brake Fluid

Buy on Amazon

Not everyone likes to purchase fluid for their daily purpose, but the Ate Bmw 320 I Brake Fluid would be an anomoly. The bmw 320 i brake fluid makes the brakes more resistant and more durable. The ate brand encompasses brake pads and rotors, boosters, hydraulic control units, master cylinders, wheel speed sensors, brake wear indicators, calipers, brake fluid, hoses, reservoirs, and wheel cylinders. Further, the Fluid is a global original equipment supplier of brake systems and components, and the ate line offers many genuine original equipment parts.

Above all, the bmw 320 i brake fluid is great with quick shipping and it is great for a fair price.

Almost all customers opine that the fluid will work quite well and this is not a common brake fluid that is easily found. Further, they say that the fluid is in plastic bottles rather than cans that can rust on the shelf. Also, they say that this can be used in any car requiring dot 3 or dot 4 ( or earlier ) brake fluid. In conclusion, many customers have used the fluid for more than a few months without any complaints, and it shows no sign of giving up.

Top Customer Quotes:

The factory used silicon fluid, so you should have no problems.
The oem brake fluid supplier for most all European cars, including Audis.
This is really the best brake fluid to use in your 2012 audi a7.
The Manufacturer says: high-quality additives in our brake fluids provide excellent protection against rust.

Best With Sbr: Maxima Racing Usa Bmw 320 I Brake Fluid

Buy on Amazon

We would, of course, be remiss if we didn't mention maximum racing USA bmw 320 i brake fluid for daily use. The maximum racing USA bmw 320i brake fluid maintains responsiveness and performance by fighting both water contamination and vaporization. Exceeds the requirements of fmvss 116 dot 5. In addition, this is compatible with sbr, EPDM and natural rubbers. Lastly, the maximum racing USA bmw320 ibrake fluid is designed to lubricate and protect critical brake system componentry while providing reliable stopping power.

One customer says - "You can also replace your 4.1 or dot 3 fluid with this too. ". Most buyers quickly discovered that the fluid is as good as anything else out there. Obviously, this product passed the test and had very satisfied buyers eager to share their experience.

Why We Like This:

Excellent boiling points: dry boiling point is 516°f (269°c), wet boiling point is 369°f (187°c).
Advanced chemistry resists corrosion, oxidation and is compatible with sbr, EPDM and natural rubbers.
One of the newcomers and featured product.

Best For Clutch: Generic Bmw 320 I Brake Fluid

Buy on Amazon

Generic offers a variety of fluids for personal choice and yet maintains quality in all the variants. The Generic Bmw 320 I Brake Fluid provides an efficient braking system in the rain and will prevent the apparition of vapor lock. Whether if you have a dedicated track car that goes through frequent brakefluid flushes, or if you are servicing your daily driver, then you will be pleased with the motul rbf600 brake fluid. Moreover, it has an elevated boiling point at 312°c/593°f which provides effective braking under extreme high-performance driving conditions. Finally, the generic bmw 320 i brake fluid is a 100% synthetic fluid that is specifically designed to resist the high temperatures of actuated steel or carbon racing brakes and clutch systems.

In conclusion, buyers found this to be one of the best fluids for daily purposes.

Why We Like This:

One of the newcomers and featured product.
Lot of satisfied buyers.

Best For Country Of Origin: Valvoline Bmw 320 I Brake Fluid

Buy on Amazon

Valvoline is known for creating pragmatic and minimalist fluid for people on the go, and its line of Valvoline Bmw 320 I Brake Fluid definitely falls in line with that reputation. Make sure this fits by entering your model number. And, the fluid is ideal for hydraulic disc brakes. To sum up, with a 4.5 rating and more than 496 buyers, the valvoline bmw 320 i brake fluid stands as the best choice.

Why We Like This:

Val dot 3&4 brake fld 12/12 foz.
New and hot releases.

Best For Use: Johnsen'S Bmw 320 I Brake Fluid

Buy on Amazon

We would, of course, be remiss if we didn't mention Johnsen's bmw 320 i brake fluid for daily use. The Johnsen's bmw 320 i brake fluid has been a leader in responding to the changing needs of the automotive aftermarket with many innovations over the years. Make sure this fits by entering your model number. Also, the fluid provides superior benefits.

Most importantly, the Johnsen's bmw 320 i brake fluid is designed for use in disc, drum and abs brake systems.

Why We Like This:

Synthetic dot3 brake fluid has a minimum boiling point of 450°f.
This can be used in an ab system.
Exceeds requirements for both dot 3 and dot 4 brake fluids.
Say it’s specially formulated for dot 4 brake fluid applications.