The 9 Best Bosch Demolition Hammer Bits (2023 reviews)

If you are looking to cut one hole, the SDS Max Core bit is the way to go. It features an effective wave design to transfer energy for up to 40 percent speedier drilling versus other bit designs. This bit has more teeth than most others and is built with better steel and has a thicker boby than any other brand. For what it's worth, it is built tough, it's heavy, and it comes packaged in a protective cardboard tube.

The "cup" of the core bit is roughly between 4 and 5 inches deep. It allows the core bit to break up masonry in smaller pieces and guides pilot bit designs. This bit is much better than drilling several tiny holes in a circle and chipping it out. This is way faster & better than using a chisel bit which leaves you with an ugly hole.

Why We Like This:

A perfectly clean and smooth hole with little mess every time
Solid core bit, built to last
Real nice way to get through concrete wall
Helps them stay in place longer

Best For small jobs: Bosch flat Chisel

Buy on Amazon

These drill bit provide a great range of bit sizes that insure fast impact when working with concrete, stone, and masonry. It reduces bit stress when drilling, keep the bit running cooler, and for fast dust removal. The bit ends are SDS plus and work with all drills that comply with the standard. The chisel and demolition bits are short but neverthless when they get the job done.

This drill bit set allows for precise starts in materials such as tile and hard stone. It is good for making holes for anchors and electrical boxes. It is ideal for high impact applications. It is used for sinking tapcons.

Why We Like This:

Great accessory for a great drill
Great little tool set for masonry work
Great starter set to get the most useful sizes
Will fit in any rotary hammer labeled sds+ or sds

Best For Drilling A deep hole: Bosch Solid Carbide head

Buy on Amazon

If you are looking for a suitable bit for your regular usage, you cannot go wrong with this pick. These bits don't really need to be sharp to drill a hole through brick, the only thing to look for is what the head of bit is made of and shaft quality. It's a Bosch masonry bit, made of heavy treated steel. It has a great design with multiple carbide heads and a significant thermal mass to keep both the drill and the carbide head cool. It cleans down to about 12 inch depth. If you want a bigger hole, use auger bits, this is for rock and concrete.

The Bosch drill lasts at least 2x as long as similar drills from 'off brands. It is perfect for drilling a deep hole in a boulder. It will work on all SDS Max drills.

Why We Like This:

Great for drilling into just about anything
German made quality sds shank bits
Produces very fine dust and self cleans down to about 12 inch depth

Best With rebar: Bosch Drill Bit

Buy on Amazon

The New Bosch Turbo and Diablo Step Drill Bits are Swiss-Made, Impact-Rated. This HC2093 bit is designed for long life in tough applications. It is ideal for anchoring and through-hole applications in concrete. It is a top quality drill bit, very effective to clean out and smooth effortless drilling. The drill bit is cooled off with water as you drill into the cement / masonry.

This is a masonry bit. The hammer drill will have to be designed to accept SDS+ bits. It is a rotary bit and intended to be used in a rotaryhammer drill.

Why We Like This:

German-made and engineered for long life in precision anchoring applications
Optimized brazing and hardening process for long life
Delivers what they promise

Best For Concrete: Bosch proprietary Drill Bit

Buy on Amazon

The bosch proprietary drill bit is satisfactory and appropriate and fits well with your regular usage. They work best with a small hammer drill with 3-jawed chucks. These have milled u-flutes with deep-cut spirals for fast drilling in block, masonry and concrete. It penetrates the wall quickly and easily. The shanks are cut to create sides for the chuck to grip.

These bits feature an asymmetric diamond-ground carbide tip for precise starts and less bit walking. It is compatible with hammer drills with 3-jawed chucks. The assortment of sizes is reasonable for most small jobs that a homeowner would encounter. The roll is round and clean.

Why We Like This:

Fits a standard drill and powered through the concrete wall with little effort
Cut spiral delivers fast material removal
Very suitable for concrete blocks or bricks
Fine for casual use in concrete block, like cinderblocks

Best With spline: Bosch Demolition Hammer Bit

Buy on Amazon

The bosch demolition hammer bit might be a relatively new release, but it's still nothing short of impressive this year. This HS1828 tamper plate is made from a fairly hefty 5-inch square piece of solid steel that weighs a little over 3-pounds. It fits into the spline section without engaging the splines since there is no need to spin. It works well on small jobs such as narrow electrical trenches or around shallow man hole repairs. It fits a shank that fits your hammer.

This tool shipped does indeed have the hex drive for use in the spline hammer drills. It is good for grade stakes too. It makes the tiles come off the floor or else it gets the hose again. It is for use in applications requiring removal of large quantities of material.

Why We Like This:

Works really well for removing ceramic tile
Works great and really does a good job
Works with bosch spline drive tools
Great fine detail or light duty chisel

Best Quality Product: Bosch Chisel Bit

Buy on Amazon

Next on the list, we've got yet another product that manages to win our hearts. It's the bosch chisel bit and it's widely considered as one of the best convenient products you can buy. BOSCH brings constant innovation to concrete and masonry drilling with increased efficiency and higher durability. This HS2164 is a chisel bit designed for demolition work in concrete. It takes 11/8 hex bit plus fits in the bosch brute perfectly. The two 60 degree cutting angles clean concrete, scale, rust, cut troughs and some asphalt. The HS2164 works with all tools that accept a hex shank.

The HS2164 chisel is designed to work with a demolition hammers, like 11355 k that accepts.

Why We Like This:

Built very strong and will last many, many years to come
Degree angles clean concrete, scale and rust
New and hot release

Best For running line: Bosch large Bit

Buy on Amazon

The HCC6521 sds max rotary hammer bit has a usable length of 18" so it should be enough to drill the desired depth that you need for the concrete floor. This bit cuts clean and fast and works much faster than a hole core bit. It is perfect for running a line set through a solid wall.

This bit drills through 8" of concrete fairly easily and quickly. The hole is well cut, and the bit holds up well too. It is designed for masonry and concrete only. It is great for any item that can be moved out the way, through the tilling process. The “cup” plugs easily and needs to be cleaned a lot.

Why We Like This:

Plugs easily, when in dirt & rocks
Lot of satisfied buyers

Best With different types of chipping Bits: Bosch Max Demolition Hammer

Buy on Amazon

The bosch max demolition hammer is suitable and reliable and fits well with your regular usage. This machine accepts all SDS Max bits. It provides maximum concrete removal for maximum productivity in all day demolition applications. It features vario-lock positioning for rotating and locking the chisel with precision, a smooth start and overload protection. This hammer provides constant response circuitry for constant power under load, as well as smooth starts and overload protection. It's very comfortable to use and packs a punch for it's size.

This tool does not hit as hard as the Brute, but it is much lighter and easier on your back. It is a supplier of technology and it is suitable for use on brick, concrete and loose stone. It's a little heavy but cut concrete fast.

Why We Like This: