The 12 Best Bully Jackshaft Clutches (2022 reviews)

Compared with other clutches in this category, the Moosun Bully Jackshaft Clutch has a design with broader appeal. The moosun bully jackshaft clutch fits any other engines with a 3/4 crank shaft and 3/16" key way, most 5.5 hp clones, 6.5 hp clones and 4-7hp motors in all brands. Tighten nuts on the bottom of the engine mounting plate. The clutch engagement rpm must be taken under consideration. In any other case, the clutch will smoke on the secondary jackshaft mounting place.

The clutch performs better at lower speeds and is ideal for stop-and-go situations. Above all, the moosun bully jackshaft clutch is designed to be used on one - wheel karts with rear tires no larger than 15" tall, and engines of 2hp-7hp.

Almost all buyers opine that the clutch is easy to install, performs extremely well, plenty of extra chain. Moreover, they strongly agree that the clutch is a perfect fit and comes with a set of screws. Also, they also found that the clutch is #35 like it says. With no doubts, this clutch passed the test and had very satisfied buyers eager to share their experience.

Why We Like This:

This can be used on off-road go-karts.
This is a problem with new drivers that are unsure of themselves.
This is great for customer service and it fits perfectly.
They ’re designed to be constantly engaged, which makes them ideal for racing go-karts.

Best For More Torque: Lotfancy Bully Jackshaft Clutch

Buy on Amazon

The Lotfancy Bully Jackshaft Clutch's high-end materials make sure that it ages well with use. The lotfancy bully jackshaft clutch is to extend the rear sprocket diameter. Make sure this fits by entering your model number. The 12 t clutch has a broached 3/16 " keyway with two set screw holes located 90 degrees apart.

The clutch fits any other engines with a 3/4 crank shaft and 3/16” key way, most 5.5 hp clones, 6.5 hp clones and 4-7hp motors in all brands. Above all, the lotfancy bully jackshaft clutch is cheaper than a new clutch.

Almost all buyers agree that the clutch can spin either clockwise or counterclockwise. In addition, they also found that the clutch does not have a hole for oiling the bushing, etc. And, a few say that this centrifugal clutch fits any other engines with a 3/4 crankshaft and 3/16 " key way. Therefore, customers were eager to recommend it to friends and families.

Top Customer Quotes:

This is for for 40 41 420 chain 6.5hp only.
This will last longer and apply more torque to the wheel.
Either of these methods will result in the clutch slipping, which is self-destructive.
This worked perfectly, works great and it fits perfectly.

Best For Heavy Duty: Fdj Bully Jackshaft Clutch

Buy on Amazon

If you often find yourself scrambling for a convenient and suitable clutch, Fdj Bully Jackshaft Clutch should be your first option for buying. The fdj bully jackshaft clutch is great for heavy duty, is durable, it is very strong and has a perfect design. If heat damage occurs, the clutch will never disengage and the machine will start taking off by itself as soon as you start the engine. In addition, it worked perfectly and it is perfect for the right size.

Finally, the fdj bully jackshaft clutch is extremely important and it is designed for 2-7hp 212 predator engine clutch performance parts.

Almost all buyers agree that the clutch will fit any engine with a 3/4 shaft. And, a few say that the clutch will last longer and is more trouble free when maintained. Moreover, a few strongly agree that the wonderful thing about this clutch is that it does n't engage too soon. In short, many have used the clutch for more than a few months without letup, and it shows no sign of giving up.

Top Customer Quotes:

This fits engines with a 5/8 inch (.625 inch) output shaft with a standard keyway.
This will handle your rpms and any wear and tare.
This has to be a #40 chain or bigger to fit.
This will work on a 3 hp briggs.

Best For High Quality: Auto Express Bully Jackshaft Clutch

Buy on Amazon

The features department is where Auto Express Bully Jackshaft Clutch truly manages to shine. The auto express bully jackshaft clutch is built with quality steel and it is great for fast shipping. Make sure this fits by entering your model number. Further, it has 35 chain, is reliable and it works well.

The clutch is made with prompt shipping, is very strong and it is suitable for dirt bikes. In addition, it makes for very fast delivery and it is made for good value. Finally, the auto express bully jackshaft clutch comes with a direct fit and it can wait for a great deal.

Most buyers quickly discovered that the clutch does work well though, not top quality like the older comet but better than the current halyard. And, they also found that the clutch is great for a predator 212.

Top Customer Quotes:

This works great, functions well and it is good for heavy duty.
This is 3/4" born and 12 teeth for 35 chains.
This is a perfect fit as long as you supposed to use the #35 chain.
This can be used on a harbor freight predator 212.

Best For Fast Delivery: Motovecor Bully Jackshaft Clutch

Buy on Amazon

For a low asking price, Motovecor Bully Jackshaft Clutch has managed to overwhelm their customers by packing as many features as they could. The motovecor bully jackshaft clutch is good for fast delivery and it works great. Centrifugal clutch 3/4” bores 12 tooths for 35 chain, common clutch for 2-6.5 hp engines 2300 prm. Further, this is extremely significant and includes two set screws, but the chain is not included.

The clutch is very dangerous. Heat damage will be seen inside the clutch drum. In addition, it is behind the snap ring, next to the sprocket teeth at the end of the clutch. Most importantly, the motovecor bully jackshaft clutch is better to oil the chain at the same time if the chain gets rough from lack of oil.

Almost all customers quickly discovered that the clutch includes 1 x go kart clutch warm tips. Also, a few say that the clutch is easy to install and holds up very well.

Top Customer Quotes:

This is designed to be used with 4 cycle engines with common straight keyed shafts.
Perfect for riding kart,s minibike and fun kart.
There were 35 chains and they worked perfectly.
This is used for riding karts.

Best For Horse Power: Ameetaa Bully Jackshaft Clutch

Buy on Amazon

The Ameetaa line of clutches comes in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. The Ameetaa Bully Jackshaft Clutch is compatible for riding karts and it is made of high-quality. Common clutch for 3.5-7hp engines using #35 chain. The centrifugal clutch 3/4 " needs to be oiled before using.

The clutch allows for a great fit and it is durable. Most importantly, the ameetaa bully jackshaftclutch is great for horse power, works great and it works well.

Most buyers agree that the clutch is used for a #40, 41, or 420 chain. Moreover, they also found that the clutch does need to be oiled before it's 1st use. Moreover, a few strongly agree that this clutch is 3/4 bore 12 t used with # 35 chain, and also please compare the other parameters are the same with your old clutch.

Top Customer Quotes:

This is compatible with both the mb165 and the newer mb200 models.
Package included: 1 x centrifugal clutch; 1 x #40/41/420 chain.
Contains a set of high - quality 40/41/420chain.
This is perfect for riding a kart. minibike baja mini bike mb165 & mb200.

Best For Easy Installation: Tioit Coeme Bully Jackshaft Clutch

Buy on Amazon

Compared with other clutches in this category, the Tioit Coeme Bully Jackshaft Clutch has a convenient design. The tioit coeme bullyjackshaft clutch fits any other engines with a 3/4 crank shaft and 3/16" key way, most 5.5 hp clones, 6.5 hp clones and 2-6.5hp motors in all brands. Don't put oil inside the clutch holes. This kart clutch also applies to honda gx120, gx140, gx160, gx200, gc160, gc190 engines.

The clutch is great with accurate description, is compatible for riding kart and it is brand new. Above all, the tioit coeme bully jackshaft clutch is designed for 2-6.5hp predator 212 engine clutch performance parts.

Almost all buyers opine that the clutch is designed to be used on one - wheel karts with rear tires no larger than 15" tall, and engines of 2hp-6.5hp. Moreover, they strongly agree that the clutch comes in 10 foot lengths in which you would also need a chain breaker tool or a grinder with a metal blade. Further, a few say that this kart clutch also applies to honda gx120, gx140, gx160, gx200, gc160, gc190 engines. In short, for almost all buyers, Tioit Coeme product was the most suitable.

Why We Like This:

What's included 1 x 10 teeth centrifugal clutch.
The centrifugal clutch 3/4" needs to be oiled before use.
★ tooth: 10 tooth sprocket for #40/41/420 chain (chain included).
★ centrifugal clutch fits 2-6.5hp small engines honda gx120, gx140, gx160, gx200, gc160, gc190.

Best For Part Number: Megaflint Bully Jackshaft Clutch

Buy on Amazon

Compared with other clutches in this category, the Megaflint Bully Jackshaft Clutch has a convenient design. The megaflint bully jackshaft clutch is designed for a good fit and it is good for heavy duty. Manufacturer says: Our clutch assembly with a 3/4" shaft for 196cc 5.5 hp & 212cc 6.5 hp engines is the oem replacement clutch assembly used on all versions of the baja mini bike, including the baja heat, mini baja, and the baja warrior. And, the clutch fits go cart motor auto engine tecumseh clutch 6.5 horsepower motor with a 3/4" bar shaft and 3/16" keyway.

The clutch is compatible with both the mb165 and the newer mb200 models. Also, it is also a perfect replacement part for many small utility 163cc 5.5 hp and 196cc 6.5 hp engines. Lastly, the megaflint bully jackshaft clutch will for many others, fits the following motors and it works for part number.

One customer says - "Way better than the ones you get off the shelf at a box store. ". A few also found that this is the perfect clutch for the go cart being built.

Why We Like This:

Fits 2 - 6.5hp small engines honda gc160, gc190, gx120, gx140, gx160, gx200.
Common clutch for 3.5-7hp engines using #40/41/420 chain.
Centrifugal clutch 10 tooth, 3/4" bore, #40/41/420 chain with 3/16 key built in.
It works great and it is sturdy.

Best With Great Service: Acpulse Bully Jackshaft Clutch

Buy on Amazon

Next on the list, we've got yet another clutch that manages to win our hearts. It's the Acpulse Bully Jackshaft Clutch and it's widely considered as one of the most convenient clutches you can buy. The acpulse bully jackshaft clutch is installed easily and it goes smoothly. Make sure this fits by entering your model number. Furthermore, the clutch works great and it worked perfectly.

Most importantly, the acpulse bully jackshaftclutch includes 3 screws, chain is not included.

One customer says - "Easy to install if you are a proficient mini bike rider. ". Almost all customers opine that the clutch works well and can’t beat the price.

Why We Like This:

This is designed for higher performance and it fits perfectly.
High quality centrifugal clutch: 100% brand new, ts16949 certified quality system.
There are many more and it is durable.
This comes with terrific customer service and it is inexpensive.

Best For Nice Fit: Teantech Bully Jackshaft Clutch

Buy on Amazon

The Teantech Bully Jackshaft Clutch is capable of outshining several other clutches featured in this list in overall features for the price point. The teantech bullyjackshaft clutch has broad compatibility and it is great for customer service. Centrifugal clutch 3/4" bore 12 tooth centrifugal clutch with 4 feet #35 chain for 2-7 hp engines, engagement speed of 2300±300 rpm. This go kart clutch and chain are also fit for Briggs and Stratton tecumseh engines and 2 - 6.5 hp with a 3/4 ” shaft.

The clutch is fitment and it can be resize for a nice fit. Finally, the teantech bully jackshaft clutch worked perfectly, is best for exact fit and it has a set of screws.

Almost all customers quickly discovered that the clutch fits coleman one seater kart. And, they also found that the clutch was a great price, great quality. Moreover, they say that the clutch is perfect for riding cart. Without any doubt, this clutch passed the test and had very satisfied buyers eager to share their experience.

Why We Like This:

This is good for fast delivery, works great and it is durable.
Lot of satisfied buyers.

Best For Product Size: Goofit Bully Jackshaft Clutch

Buy on Amazon

We would, of course, be remiss if we didn't mention Goofit Bully Jackshaft Clutch for regular usage. The goofit bully jackshaft clutch has internal gears and it is built for a long service life. If you have any questions or need help, please leave us a message before or after purchase. Moreover, this is one of the important parts of a motorcycle, and its main function is to transmit or cut off the power transmission between the engine crankshaft and the gearbox.

Lastly, the goofit bully jackshaft clutch works great, is great for heavy duty, It is made with fast shipping and has a perfect design.

Most customers quickly discovered that the clutch is suitable for bd125 boom grom clone models. Further, they also found that the clutch fits apollo 125cc. To add to that, it works well on an apollo 125. Also, a few say that the complete clutch is the best way to go because it comes already assembled and it ’s cheap. To sum up, the tone of buyers is very positive and we believe that the clutch suits the purpose.

Top Customer Quotes:

If you are not satisfied with the order, please leave us a message.
The manufacturer says: we are always available to help our customers.
This is designed for good fit and has professional design.
This is made for dirt bikes and it fits well.

Best For Small Engine: Parts Club Bully Jackshaft Clutch

Buy on Amazon

The Parts Club Bully Jackshaft Clutch's high-end materials make sure that it ages well with use. The parts club bully jackshaft clutch is made for use with the common 40/41/420 chain size. You will receive the product in the picture. The 1 " bore allows this clutch to work with gas engines larger than 6.5 hp.

The clutch is designed to be able to move a certain amount of weight. Finally, the parts club bully jackshaft clutch is simple, It allows for a great fit and has a perfect design.

Most buyers agree that the clutch can take a beating, be sure and clean and oil after a long ride or really rough duty. In addition, they also found that the clutch will tell you everything you need to know about this clutch and manufacturer. Also, they strongly agree that the motor turns and at a certain rpm the clutch will engage, in the weight if the vehicle is too heavy the clutch will get too hot because of the friction and it will fry, even with a small engine. In conclusion, many have used the clutch for more than a few months without any complaints, and it shows no sign of giving up.

Top Customer Quotes:

This comes with belt and bolts on easily to a 212, 301cc, clone engines.
Works with gas engines larger than 6.5 hp (top limit - 13hp).
Manufacturer says: we offer you a three - month warranty, you can buy it with confidence.
It is very popular in the hon da prokart,cadet and fun kart /buggy market.