Are you planning to buy _craftsman_ 70.5 bandsaw blades, and are you confused about the options ? You have come to the right page.

Our review process: Show/Hide

Our Top Picks:

Best Overall: Buy: Powertec High Performance Blade READ REVIEW

Best For Longer Life: Buy: Ayao Original Blade READ REVIEW

Best For High Quality: Buy: Powertec Craftsman 70.5 Bandsaw Blade READ REVIEW

Best For Soft Ferrous Metal: Buy: Imachinist Great Blade READ REVIEW

Best For Worth The Money: Buy: Timber Wolf New Blade READ REVIEW

Best For Resawing: Buy: Timber Wolf Craftsman 70.5 Bandsaw Blade READ REVIEW

Best For Mild Steel: Buy: Olson Saw Craftsman 70.5 Bandsaw Blade READ REVIEW

Best For Metalworking: Buy: Imachinist Craftsman 70.5 Bandsaw Blade READ REVIEW

Best For Intricate Cuts: Buy: Supercut Bandsaw Craftsman 70.5 Bandsaw Blade READ REVIEW

Best For Carbon Steel: Buy: Ayao Craftsman 70.5 Bandsaw Blade READ REVIEW

Best Durability: Buy: Atools Craftsman 70.5 Bandsaw Blade READ REVIEW

Best Overall: Powertec High Performance Blade

Buy on Amazon

Compared with other blades in this category, the Powertec high performance blade has a design with broader appeal. The Powertec high performance blade is best for good fit and it allows for smooth cutting. The manufacturer says: Our blades are built to wear evenly and deliver straight cuts at extreme speeds. This high performance blade is designed to provide a reliable cutting action and deliver welds on wood, plastics and non - ferrous metals.

The blade is suitable for most, 70-1/2” long, 1/4” wide, 0. In addition, the blade works great and it cuts smoothly. Lastly, the Powertec High Performance Blade allows for tight turns and it is built for a long life.

Almost all buyers opine that the blade provides an excellent cut with minimal heat. In addition, they also found that the blade is suitable for most 70-1/2” long, 1/4” wide, 0. In addition, a few say that the blade performs better than expected and will last regular use. Therefore, buyers were eager to recommend it to friends and families.

• It stays sharp, is thick and it works fine.
• The blade tracked very straight and true and made a very smooth cut.
• Packaged perfect, seal band around the teeth to make the opening blade safe.
• This is for proper tooth spacing, matched set and exact finishing.

Best For Longer Life: Ayao Original Blade

Buy on Amazon

The Ayao Original Blade is suitable and reliable and fits well with your regular use. The ayao original blade is thick and it is good for a longer life. The Manufacturer says: We have been manufacturing bandsaw blades for more than 25 years, currently producing around 500, 000 blades each year. And, the blade works well for good blades and it is strong.

The blade allows for easy install and it cuts very smoothly. In addition, the blade is made of high quality carbon steel, ideal for wood or general purpose cutting. Above all, the ayao original blade cuts very well and it is great for tight turns.

Almost all buyers quickly discovered that the blade was perfect for a craftsman bandsaw. Also, they say that the blade is a great blade for the price, so I will re order.

• Raker set teeth arrangement, all teeth arranged evenly for better cutting performance.
• Fit 10" craftsman 921400, rikon 10-305 and 10-3061.
• This works great, has great blades and it is made for good value.
• Unique welding technique strong and smoother welding point.

Best For High Quality: Powertec Craftsman 70.5 Bandsaw Blade

Buy on Amazon

The Powertec craftsman 70.5 bandsaw blade is capable of outshining several other blades featured in this list in overall features for the price point. The Powertec craftsman 70.5 bandsaw blade cut very well and it is designed for a long life. The manufacturer says: Our blades are built to wear evenly and deliver straight cuts at extreme speeds. The band saw blade metal teeth feature an optimal geometric design and have been hardened to rc 64.

The blade makes for great company and it is great for tight fit. Further, the blade is guaranteed for proper tooth spacing, matched set and exact finishing. Finally, the Powertec craftsman 70.5 bandsaw blade fits craftsman 10", skil hd3640 and dremel 1120. Powertec is a professional manufacturer of high quality woodworking machines, wood work accessories, and a wide assortment of oem replacement parts.

With no doubts, this product passed the test and had very satisfied buyers eager to share their experience.

• Teeth specs: 3tpi (6 teeth per inch).
• This is suitable for most 72-1/2” long, 1/2” wide, bandsaw blades.
• This provides seamless cutting results at high performance speeds.

Best For Soft Ferrous Metal: Imachinist Great Blade

Buy on Amazon

The best part: Imachinist Great Blade costs comparatively little and it is available to ship in 24 hours. The imachinist great blade comes with heat treating on the imported heat treatment machines, The teeth are hard, more tensive to resist hits and power from the metal. The Manufacturer says: We use an imported milling machine to mill teeth for the blade, making sure the teeth are sharp and durable while cutting metal. Moreover, the blade has a fixed teeth profile, teeth distance is 1.8mm per teeth.

The blade is made for an excellent fit and it is designed for stainless steel. Most importantly, the imachinist great blade is also important, Here is our experience.

Most buyers found that the blade is of better quality than its craftsman equivalent. In addition, they strongly agree that the blade is a good cheap blade for general purpose work. Moreover, a few say that this is a very good blade, cut through a sheet of steel like it is butter. In short, many have used the blade for more than a few months without letup, and it shows no sign of giving up.

• This is perfect for soft ferrous metal only.
• 1 piece of 70-1/2" x 1/2" x 0.025" x 14tpi band saw blade.
• This is a great blade for finishing cuts, and good quality.
• Do you think it's important for blade life ?.

Best For Worth The Money: Timber Wolf New Blade

Buy on Amazon

Compared with other blades in this category, the Timber Wolf New Blade has a convenient design. The timber wolf new blade is used for straight-line cutting in 2-1/2”-6” hardwood and 1-1/2”-4” softwood. This is an excellent resaw blade if you want a little nicer finish than the 3 tpi but material height is limited to 6. Further, this is for thin kerf and it can qualify for free shipping.

Finally, the timber wolf new blade runs cooler and it cuts wood.

Most buyers find that the blade cleans up with a few quick swipes of a hand plane or the planer. Furthermore, a few also found that the blade is perfect for ripping small mahogany boards. And, they say that this is an excellent blade to re saw boards up to about 4 inches for drawer sides and backs.

• Free shipping on orders over $99 from ps wood machines within the continental US.
• Runs cooler, lasts longer, excellent resaw blade.
• This lasts longer and it cuts beautifully.
• This can also make a 2-1/2” radius (5” diameter) cut.

Best For Resawing: Timber Wolf Craftsman 70.5 Bandsaw Blade

Buy on Amazon

Timber Wolf offers a variety of blades for personal choice and yet maintains quality in all the variants. The Timber Wolf Craftsman 70.5 Bandsaw Blade is used for cutting up to 2-1/2” of hardwood and up to 1-1/2” of softwood. These blades must be run under a little lower tension, which is better for your band saw. These blades give a clean, smooth finish for minimum sanding and are an excellent scrolling-type blade.

Most importantly, the timber wolf craftsman 70.5 bandsaw blade runs cooler, works well for hard wood and it cuts great.

Most buyers agree that the blades come in different packaging. Moreover, a few strongly agree that the blade is a good saw blade for flooring. To sum up, for almost all customers, it was the most suitable.

• This is okay but didn’t cut tight curves.
• This can be used by norm Abram.
• This cuts clean and it lasts longer.
• This buy again, stays sharp and it cuts smoothly.

Best For Mild Steel: Olson Saw Craftsman 70.5 Bandsaw Blade

Buy on Amazon

For a low asking price, Olson saw craftsman 70.5 bandsawblade has managed to overwhelm their customers by packing as many features as they could. The Olson Saw Craftsman 70.5 Bandsaw Blade is cut great and it cuts great. Make sure this fits by entering your model number. These are heavy - duty, durable, commercial - grade band saw blades for industrial, woodworking, diy and professional craftsmen. Lastly, the olson saw craftsman 70.5bandsaw blade is designed for mild steel and it is great for non-ferrous metal.

Most buyers find that the blade is a good blade for fine work. And, they strongly agree that the blade is misaligned when held flat during the welding process. Also, they also found that the blade would send a second one that hopefully does not have this problem.

• Lot of satisfied buyers.
• Good brand reputation.

Best For Metalworking: Imachinist Craftsman 70.5 Bandsaw Blade

Buy on Amazon

Compared with other blades in this category, the Imachinist Craftsman 70.5 Bandsaw Blade has a convenient design. The imachinist craftsman 70.5 bandsaw blade is compatible with most bandsaws with more choices on teeth pitch. do think it's important for blade life. Also, this is best for mild steel and it is used for non-ferrous metal.

The blade works great and it works well. Moreover, it is perfect for cutting soft ferrous metal. Above all, the imachinist craftsman 70.5 bandsawblade is made worth the money and it allows for smooth cutting.

One customer says - "Cutting well, long - lasting excellent blade. ". Most buyers agree that the blade is good for cutting PVC though.

• This is designed for metalworking, ideal for metalworking craftman, blacksmith,s mechanics etc.
• Bi-metal type, hss m42 grade, 70-1/2" long, 1/2" wide, 0.025" thick, 10-14 tpi.
• This is required when a blade cuts metal for the first time.
• Suits all bandsaws which use a 70-1/2" long, 1/2" wide bandsaw blade.

Best For Intricate Cuts: Supercut Bandsaw Craftsman 70.5 Bandsaw Blade

Buy on Amazon

Supercut Bandsaw line of blades comes in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. The Supercut Bandsaw Craftsman 70.5 Bandsaw Blade is packaged in a carefully designed container to ensure safety and maintain sharpness. Make sure this fits by entering your model number. This premium carbon tool steel band saw blade is made of a special material that is thinner and tougher with special heat treating with high silicon content to enable it to withstand the sharp flexing and high speeds. Finally, the supercut bandsaw craftsman 70.5bandsaw blade cuts nice and it will for many others.

Almost all customers agree that the blade works well and hasn't snapped and that's a good sign.

• The Manufacturer says: it also carries our limited lifetime weld warranty on every weld.
• Versatile – cut all types of wood and non-ferrous metals (copper, brass, aluminum).
• 100% made in the USA - not made anywhere else but the USA.

Best For Carbon Steel: Ayao Craftsman 70.5 Bandsaw Blade

Buy on Amazon

The Ayao Craftsman 70.5 Bandsaw Blade has killer features for the price point. The ayao craftsman 70.5 bandsaw blade is made of high quality carbon steel, ideal for wood or general purpose cutting. The Manufacturer says: 70-1/2 inch x 1/4 inch x 6tpi ​all the blades are manufactured in our own factory. And, the blade comes with quick shipping, is thick and it is designed for a longer life. Lastly, the ayao craftsman 70.5 bandsaw blade is strong and it cuts great.

Almost all customers opine that the blade is a pretty good deal for 2 blades. Moreover, a few also found that the blade is a real value for the money. Therefore, most buyers agree that the blade suits them best, and no one questions it.

• Fit 10" craftsman 921400, rikon 10-305 and 10-3061.
• Raker set teeth arrangement, all teeth arranged evenly for better cutting performance.
• Unique welding technique strong and smoother welding point.

Best Durability: Atools Craftsman 70.5 Bandsaw Blade

Buy on Amazon

Compared with other blades in this category, the Atools Craftsman 70.5 Bandsaw Blade has a convenient design. Further, the blade is strong and it is built with sharp teeth. Atools only supplies high-end ground tooth bandsaw blade. Above all, the atools craftsman 70.5 bandsaw blades are made of premium carbon steel for maximum strength and blade life.

• Raker set teeth arrangement, all teeth arranged evenly for better cutting performance.
• Fit 10" craftsman 921400, rikon 10-305 and 10-3061.
• Unique welding technique strong and smoother welding point.
• Ground teeth, extraordinarily sharp and can stay sharp longer.