The 6 Best DC Amp clamps (2023 reviews)

The pdi dc amp clamp is long-lasting, rigid and fits well with your regular usage like a dream. This amp clamp is used on a Snap-On Zeus and a Snap-On Vantage and it works great for hard to reach places. It looks and feels well built. The 60 handheld 60 amp ac/dc current clamp probe allows you to measure ac and dc current without disconnecting the existing wiring. It is engineered to have a narrow jaw for hard to reach places. It works on all meters and Lab Scopes with banana plugs, which the Fluke 88 uses. It is nice to clamp a wire and go exploring while watching the readout.

The probe end wire size fits most of the newer car battery cables but is small for the older ( nineties on down cars testing starter motors or compression. The quality is good and resolution is detailed. This amp clamp will fit around most automotive battery cables to do parasitic draw tests.

Why We Like This:

Works great for the verus pro scope
Well made and highly useful for automotive computer controlled diagnostics
Has cords long enough to actually use

Best For The money: Hantek DC Amp Clamp

Buy on Amazon

The hantek dc amp clamp is suitable and reliable and fits well with your daily usage. Though it will detect signals below 20mA (it's rated low end) it is pretty noisy for limited use. It is perfect for automotive use. Even with the relative small nose, it's very bulky for use on small and more delicate wires and circuits. The rise and fall times of the current probe signal are both about 10 microseconds, which corresponds to a bandwidth of about 30 or 40 kHz.

The current clamp is a transducer, which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms accurately. It is not only available for the detection or monitor of the possibly existing creepage, but for the measurement with little gap using its extended jaws. It is necessary to turn the zero adjustment knobs on the clamp until the multimeter or scope reads zero. If you're gonna use this on your bench and can compensate for its shortcomings, this will work and save you a lot of money.

Why We Like This:

Perfect to evaluate current curve forms, however, the tolerance is higher
Accurate wave form going up to 10khz or more, pretty sharp picture
Good for current measurement of speakers

Best With Clamp Meter: Jasleen DC Amp Clamp

Buy on Amazon

The jasleen dc amp clamp is capable of outshining several other clamp featured in this list in overall features for the price point. This is an impressive measurement device. It has features for problem solvers and repair people. It is easy to make these measurements which would otherwise be very difficult and intrusive. The display is large enough to read easily and the meter beeps to confirm when a selection is made via the blue buttons.

These are easily dialed in by the control knob and there are detents to let you know when you arrive at the setting you desire. The amp meter zeros quickly and the readings are accurate. It comes with batteries which require a screw driver to install but a screw driver is included so all is well there. It has an auto-shutdown feature for 20 minutes of inactivity. It is handy for use if you have to work on a ladder or in other circumstances where you can carry it in your pocket.

Why We Like This:

Numerous well thought out features for problem solvers and repair people
Packs all the necessities in a smaller profile
Handy if you are looking for pocket sized
Delivers 0.1ma ac resolution and sensitivity

Best For HVAC: ALLSUN DC Amp Clamp

Buy on Amazon

Not everyone likes to purchase clamp for their regular usage, but the allsun dc amp clamp would be an anomoly. It works well taking AC and dc current measurements when attached to a digital volt meter. It permits the display to be placed a few feet away from the clamp, which makes it easier to get a clear view. It happens to be well put together and with good ABS plastic too, comes in a good case.

The clamp size is large enough for most residential wiring and small enough to use in automotive (DC) environments where space is restricted. It's compact, has a good metal insert for the battery door and good terminals for the battery. It is great value for a milli-ampere probe. If a meter is needed, the user has the flexibility to choose one is best-suited to the application.

Why We Like This:

Nice meter, zeros out very well and is accurate
Needs a 9v battery, no auto shutoff
Noisy, but works well for relative testing

Best With Temperature Probe: Aiomest DC Amp Clamp

Buy on Amazon

Compared with other clamp in this category, the aiomest dc amp clamp has a convenient design. It is constructed with large 45mm open jaws/ convenient for clamping thick and measuring multiple wires. It provides clear reading in darkness and dim places, extremely suitable for troubleshoot, electrical, industry field, lab, automotive repair, home applications. It measures dc&ac voltage, dc&ac current, resistance, capacitance, frequency, temperature, diode, and audible continuity test.

Why We Like This:

6000 count backlit lcd, clear reading in dark and gloomy areas
Mobile devices can be controlled and monitored up to 32.8 feet away
Good investment for long term

Best For capacitor: Waporich DC Amp Clamp

Buy on Amazon

Waporich line of clamp come in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. It has a design for the higer ac/dc current test range. The max jaw size of 1.7 inches can measure up to 600 A DC/ AC current without interruption of the circuit. It is perfect for bench testing.

Why We Like This:

A clamp adapter with test probes
Has high resolution and is accurate, works great so far
Good brand reputation