The 8 Best Electric circle cutters (2023 reviews)

The rexbeti electric circle cutter's high-end materials makes sure that it ages well with use. This metal cuter is super convenient and easy to use. It can cut any size circle that you want. It has a double sided nibbler that the handle can be screwed on the opposite side of the one being used. The round housing allows the tool to ride along a t-square to maintain a straight line.

The cutter head rotates 360 degrees, it is very simple to use, and it is safe to carry, and it is also very convenient to carry. It can work in a drill press bit where the center section rotates and does not lock into a fixed position. The shavings are extremely sharp and hard to see on the floor. It’s very easy to set up and cuts with a breeze.

Why We Like This:

Very powerful curves/circles that are easy to cut
Cuts acrylic and sheet metal easier than rotary tool or shears
Super great tool for cutting sheet metal
The simplest metal tool for cutting curves

Best For odd shapes: Dicfeos Electric circle Cutter

Buy on Amazon

Not everyone likes to purchase cutter for their daily usage, but the dicfeos electric circle cutter would be an anomoly. This tool easily cuts 24 gauge stainless steel sheet. It comes with a replacement cutting head, the circular hole cutting jig, and a metal hole cutting bit. The Nibbler is pretty intuitive and easy to use and makes short work of the sheet metal. It comes in and the pre-formed foam inside the case that holds each part in it's place. The shavings are extremely sharp.

This cutter can only be mounted on electric and pneumatic drills. It will be a big time saver for cutting sheet metal and corrugated metal roof sheets. There is a fairly inexpensive table mount accessory that attaches the drill and cutter to your work bench.

Why We Like This:

Works great and comes in a metal storage case
Good tool to have for thin metal
Delivers what they promise

Best For thin flat Metal: Genesis Electric circle Cutter

Buy on Amazon

The genesis electric circle cutter should be able to handle its purpose and duties with ease. It does a good job in cutting metal. It is great for metal roofing/siding, plenty of power. The cutters are very close together and whatever you’re cutting cannot be too thick like the thickness of metal roofing should be fine.

This machine is very fast and cuts clean. These shears will not cut through ribs in metal roofing. It is heavy as it is. It is good for making straight sweeping nibbles. They are sturdy and easy to use.

Why We Like This:

Powerful jaws cut right through a variety of sheet metal gages
Plenty of power, 4 amp motor, variable speed cuts through sheet steel and aluminum
Great quality and clean straight cuts

Best With Very thin materials: Wen Electric circle Cutter

Buy on Amazon

The wen electric circle cutter should be able to handle its purpose and duties with ease. It is an essential tool when installing metal roofing. The design of this powerful unit with it's 3 blades makes it perfect for easy and quick straight across cuts. It comes with radiuses of 3 inches and up to help take on projects with a lot of turns and curves. The center cut strip (or kerf) is about wide enough to start your 90 degree corners from. These have to hold at a specific angle to cut.

The cut quality is clean, with little tool scaring, or gouging. It will not easily open a tin can.

Why We Like This:

Very easy to use, cuts metal roofing and siding like butter
Cuts corrugated sheet metal with a little extra push
Works extra fast on smooth surfaces
Makes cutting sheet metal so easy

Best For Straight Cuts: SHALL Electric circle Cutter

Buy on Amazon

Shall offers a variety of cutter for personal choice and yet maintaining quality in all the variants. This cutter makes easy work of James Hardie and lauan. Whether you're cutting through vinyl siding, backer board or something as simple as cardboard this is the tool you want to have on hand. It delivers fast clean cut without creating extra wastes and air. It is used to cut backer board for tiling for years using a hand tool scribing it and breaking it. There's almost no vibration in the handle, and it's comfortable to use.

For the power that it has it's it's surprisingly lightweight and it really gets the job done quickly.

Why We Like This:

Impressive hardie backer and siding cutter
Cuts hardy board like butter with virtually no dust
New and hot release

Best For long Straight or nearly Straight Cuts: PACTOOL Electric circle Cutter

Buy on Amazon

Next on the list, we've got yet another cutter that manages to win our hearts. It's the pactool electric circle cutter and it's widely considered as cutter that has the most suitable features. If you need to cut sheet metal on a regular basis, this tool could be very useful. It is well-designed and rugged built. It is used for arts and crafts. It would be super useful for duct work or siding etc and it mounts easily to a power drill. The shearing blades can be adjusted for wear, although it has not required any adjustment since it is new.

This little tool makes a fast clean cut, likely faster than you can keep up with. It will hold up well in professional use. It is suitable for right or left-handed users.

Why We Like This:

An excellent tool for light gauge sheet metal cutting
Effective shears for metal and other material
One of the new comers and featured product

Best For durability: Shker Electric circle Cutter

Buy on Amazon

We know from years of feedback from readers, customers and amazon sellers, what most people want in a convenient and appropriate cutter. The shker electric circle cutter is exactly that - it's a simple cutter that hits all the right notes. The aluminum that Pella provides for the outside is very thick and tough to cut. It really works well on thicker Aluminum. It comes with positioning grooves, so it can achieve precise dimension to complete various metal pieces such as iron. It is great for cutting a variety of materials. It fits in place and is ready to use right away. It is great for thin sheet metal like tin and flashing and drip edge. It is designed for long term life and durability.

Why We Like This:

Light and portable, easy to carry wherever you are
Great lil tool for sheet metal
Equipped with sturdy metal gearheads designed for long term life and durability

Best For Sheet Metal production: Tiiyee Electric circle Cutter

Buy on Amazon

Tiiyee line of cutter come in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. It can be used on 15003000rpm electric drills or pneumatic drills, sheet metal tools and nibbler metal cutting tool are more easy and powerful than normal shears and snips. It offers comfort, superior control, maneuverability and increased safety. The drill attachments and nibbler metal cutter drill attachment have excellent cutting effect without any burrs and crimping.

The nibbler drill attachment with double head and multi-purpose nibbler cutter design allow you to continue cutting with the other cutting edge when one side is dull. It has an ergonomic design handle for comfortable grip.

Why We Like This: