Are you planning to buy front auto lockers, and are you confused about the options ? You have landed on the right page.

Our review process: Show/Hide

Our Top Picks:

Best Overall: Buy: Yukon Gear Front Auto Locker READ REVIEW

Best For Nice Quality: Buy: Usa Standard Gear Front Auto Locker READ REVIEW

Best For Open Differential: Buy: Sylvan Front Auto Locker READ REVIEW

Best For Easy Installation: Buy: Powertrax Front Auto Locker READ REVIEW

Best For High Strength Steel: Buy: Yukon Gear & Axle Front Auto Locker READ REVIEW

Best With Locking Differential: Buy: Torq Locker Front Auto Locker READ REVIEW

Best For Reliable Traction: Buy: Spartan Locker Front Auto Locker READ REVIEW

Best Overall: Yukon Gear Front Auto Locker

Buy on Amazon

The Yukon Gear Front Auto Locker's material feels more premium than its price would suggest. The yukon gear front auto locker is built for a long life and it is made for open differential. For whatever terrain you find yourself on, from street to snow, trails to mud. In addition, it is good for low quality and it has cover bolts.

The locker provides aggressive traction to both wheels while maintaining a smooth ride. And, the locker is designed for ultimate durability and it is designed for top quality. Above all, the yukon gear front auto locker is perfect for great quality, It comes with a direct fit and has a disconnect design.

Most buyers found that the locker fits an 08 silverado 1500 with 3. Also, a few say that the locker is a different position compared to the stock chevy/gmc versions, clutches only used vs the original g80 with centrifugal weight system + clutches. Further, they also found that the locker is a street rig, it should be fine. As a result, buyers were very happy to recommend it to friends and would-be buyers.

• This is best for good fit and it is great for good quality.
• This is ready for you to bolt the ring gear too and install.
• This is designed to fit a standard cut 4 series gear.
• This is the perfect 1996 Ford Bronco.

Best For Nice Quality: Usa Standard Gear Front Auto Locker

Buy on Amazon

The USA standard gear front auto locker is suitable and reliable and fits well with your daily use. The USA standard gear front auto locker is perfect for shops that have small parts on hand. Usa standard gear manufactures products that are engineered to surpass and exceed oem specifications and eliminate points of failure through quality engineering, manufacturing, and quality control practices. These kits use timken bearings and races along with high quality seals and small parts.

The locker is a perfect fit and it can wait for a great deal. Lastly, the USA standard gear front auto locker fits 2001 to 2009 chrysler 9.

Almost all customers opine that the locker will work in a 2012 jeep dana 30 frontend. Further, a few strongly agree that the lockers are made in the u.s.a. timken. In addition, a few strongly agree that the lockers will change until 2011. In conclusion, for almost all customers, Usa Standard Gear product was what they were looking for.

• Get it done right, the first time with drivetrain parts from using standard gear.
• USA standard master overhaul kits let you finish your install with confidence.
• Fits 2001 to 2009 chrysler 9. 25" rear uses koyo bearings and races.
• This includes 2 crush sleeves as pictured.

Best For Open Differential: Sylvan Front Auto Locker

Buy on Amazon

Sylvan offers a variety of lockers for personal choice and yet maintains quality in all the variants. The Sylvan Front Auto Locker works well and it is great for peace of mind. Make sure this fits by entering your model number. The sylvan climb master 2.0 reinforced pro locker fits compatible with jeeps that have a dana 30 front axle with 27 spline.

The locker is compatible with jeep brand vehicles of Wrangler, Cherokee, Grand Cherokee, and compatible with jeeps in general. In addition, the locker is great for traction for days, works as intended and it held up well. Finally, the sylvan front auto locker comes with a full 2 year warranty, It can be trusted for good quality and has a disconnect design.

Most customers think that the locker will clunk, snap, or however one might describe it, but it works. And, they strongly agree that the locker can go back in correctly. In addition, a few strongly agree that this locker is for jeep brand vehicles of Wrangler, Cherokee, Grand Cherokee, and jeeps in general.

• This is worth the money, works great and it is easy to install.
• This fits jeeps that have a dana 30 front axle with 27 spline.
• Full 2 year warranty - no question asked money back guarantee!.
• Reinforced steel manufacturing; strength and endurance tested. Durable, reliable next - level performance locker!.

Best For Easy Installation: Powertrax Front Auto Locker

Buy on Amazon

If you often find yourself confused about the appropriate and satisfactory locker, Powertrax Front Auto Locker is your end point. The powertrax front autolocker is easy to install and it works perfectly. Powertrax grip-lok, lock-right lockers and no-slip traction systems automatically provide 100% traction on-demand, under the toughest circumstances. The powertrax no - slip traction system is the latest design in quiet traction - adding differential technology.

The locker is great for use where finesse is as important as brutal traction is. And, it is as close as it gets to a traditional and trusted muscle car or truck style limited-slip. Above all, the powertrax frontauto locker has driven their car, suv or light truck up a slippery slope may have noticed that one wheel would begin to slip before the other.

Almost all customers find that the locker has enough information for you to look it up on a Yukon website or similar. And, a few say that the locker will fit up to 3.73 gears. Further, they say that the manufacturer does not make this unit for a 3.55 ratio. Overall, many have used the locker for more than a few months without any problems, and it shows no sign of giving up.

• This will fit your front dana 30 in the 2001 Cherokee.
• This will fit the 1/2 ring gear bolts for the JK 's.
• This works great and it is good for the bottom line.
• This is the break-in period of the lsd.

Best For High Strength Steel: Yukon Gear & Axle Front Auto Locker

Buy on Amazon

The Yukon Gear & Axle Front Auto Locker's superior materials make sure that it ages well with use. The yukon gear & axle front auto locker is built with great customer service and it is great for nice quality. Make sure this fits by entering your model number. These units are able to provide 100% power to both tires, while allowing for disengagement to navigate corners in the road and bends on the trail.

The locker is crafted from exceptionally strong metals. Most importantly, the yukon gear & axle front auto locker is perfect for high performance and it is very helpful.

Most buyers agree that the locker will fit a front dana 30 only. In addition, a few also found that the locker fits a 9” ford and also fits jeep dana 30 front axles. In addition, they strongly agree that the locker is perfectly good. You don’t notice any difference but it works amazing off-road. Obviously, this product passed the test and had very satisfied buyers eager to share their experience.

• Patented internal design reduces common locker failures.
• This is best for high strength steel and it is good for good quality.
• Using a patented internal design nearly eliminates common locker failures.

Best With Locking Differential: Torq Locker Front Auto Locker

Buy on Amazon

Best part: Torq Locker Front Auto Locker costs comparatively little and it is available to ship in 24 hours. The torq locker front autolocker allows for smoother locker engagement. The manufacturer says: To be the best, we build with the best, Torq locker is 100% made in the USA with 100% American raw materials. The innovative design features of the torq locker have three game - changing benefits.

The locker is the most advanced, strongest, highest quality automatic locking differential on the planet, proven in the most extreme vehicles, from hard-core rock crawling, racing the king of the hammers, rock bouncing, sand dunes and mud drags. In addition, this design is more forgiving than the rigid dowel pin design. Finally, the torq locker frontauto locker stays locked, works great, It is for open differential and has an outstanding design.

Almost all buyers quickly discovered that the locker is easier to install than that one. Moreover, they strongly agree that the locker will fit your front axle, which is a dana 30. Moreover, they say that the locker performs flawlessly and almost never locks up / engages in 2wd except occasionally during a tight u - turn, but not always. In conclusion, many buyers have used the torq locker front auto locker for more than a few months without any issues, and it shows no sign of giving up.

• Easiest locker on the market to install, no spacers, no dowel pins, no measurements.
• This will always lock whenever the axle gets any power.
• This will fit dana high pinion 30 and low pinion 30.
• This makes a pop when you make a sudden turn.

Best For Reliable Traction: Spartan Locker Front Auto Locker

Buy on Amazon

Best part: Spartan Locker Front Auto Locker costs comparatively little and it is available to ship in 24 hours. The spartan locker front auto locker is very easy and it is built for reliable traction. From general automotive repair to off-road trail performance, USA standard gear products are quality built, providing the right part at a great value. The spartan locker 's design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap.

The locker is an excellent choice when looking for an affordable solution in off-road traction. Moreover, the locker is a mechanical locker that installs directly into standard differential cases, replacing existing spider gears. Above all, the spartan locker front auto locker improves ease of installation.

Almost all buyers found that the locker would turn and handle much more nicely. And, a few also found that the locker will fit 2016 and 2017 tacoma's with 8 inch rear diff. Further, a few strongly agree that this unit will also only work in a standard open ( non posi / non limited - slip ) carrier. Overall, the tone of buyers is very positive and we believe that the locker suits the purpose.

• This fits the toy 8" diff.
• This has a killer price point.
• This is for early 8" 30 spline axle.
• This will also utilize the factory side gears.