The 8 Best High Temperature High Pressure hoses (2023 reviews)

This hose is definitely heavy and heavy duty. It is sturdy and strong enough not to tear up after just a few uses. The type of connector on your hose is made to match the connectors on your pump and spray gun assembly. The hose feels heavy duty and it does come with a male quick connect fitting on one end and a female on the other. It's rated for any pressure under 4500 psi.

This hose is very heavy duty and it gets really stiff when under pressure, it will last several years. It is great with no problems. It sure makes cleaning a lot easier than the typical 25' hose supplied with many pressure washers.

Why We Like This:

Way too stiff, hard to use in tight places, great length
Good economical substitute, work as advertized
Great hose, really sturdy and heavy duty like it says

Best For Pressure Wash: POHIR High Temperature High Pressure Hose

Buy on Amazon

This is one heavy duty hose. It is more of a rubberized material instead of the hard plastic that most pressure washer hoses are made of. It is compared to the original hard plastic hose that is an endless fight with a snake but this one is awesome. It is kink resistant and lays flat when extended out and rolls up nicely on the reel.

The quality of material is apparent with the heavy weight of the hose. The hose is great quality and a nice bend radius and looks like it will hold up for some time. The coiled hose, together in one bundle is pretty hefty. This is a fantastic device and definitely improved deep clean effort.

Why We Like This:

Heavier than original but longer and superior material
Can handle high temperatures and pressures
Delivers what they promise

Best For siding: YAMATIC High Temperature High Pressure Hose

Buy on Amazon

This rubber hose could be used on kinds of surfaces with great abrasion resistance. The yamatic hose is heavy and well made and more suited to 13 hp class gas washers used for concrete cleaning. The chemical electric pressure washer almost certainly has 1/4 inch hose and quick connects while the yamatic hose is 3/8 and has 3/8 fittings so it will not fit directly.

This hose will stand with up to 4200 psi pressure washers, if the outlet of your pressure washer is 3/8 and has 3/8 fittings so it will not fit directly. It is heavy duty with 3/8" couplings. The fittings come already attached to the hose that enable connections to be made to both the gun and power washer. It has a comfortable margin of safety and longevity.

Why We Like This:

Will handle up to 4, 000 psi pressure
Durable and non kinking pressure washer hose
Twists less than a normal hose
Pretty stiff hose so no kinking with normal use

Best With Karcher: RIDGE Washer High Temperature High Pressure Hose

Buy on Amazon

It's easy to re-coil up as a braided high pressure hose can be. It's kink free but you really need to unwind the entire hose across your yard before you put the pressure to it. It makes it harder to point the wand. It's extremely well constructed and albeit a bit stiff so it doesn't get tangled up at all.

This new hose has a higher pressure rating and comes with the ends already installed. It is stiffer and heavier but it is a wire braided hose so that is expected. It is easy to connect and disconnect the hose from the power washer when storing the hose. It's heavy but good quality.

Why We Like This:

Excellent quality braided wire pressure washer hose
Included quick coupler swivels assist in maneuverability
Good investment for long term

Best For sidewalk: POHIR High Pressure Washer Hose

Buy on Amazon

The features department is where pohir high pressure washer hose truly manages to shine. This new hose doesn’t try to re-roll or kink itself. It’s essentially a hydraulic hose so it’s a little heavy and can be difficult to wind up because it is rigid and wants to twist to prevent kinks. It is equipped with a 3/8" quick connector which is not only easy to connect & disconnect, but also helps connect firmly to the pressure washer without being easily shaken, damaged, rusted or leaked.

The heavy duty hose 100 ft is perfect for hose extension, it is durable and able to support quite high working pressure. It can be rolled into about an 8" diameter coil. It is suitable for hydraulic or pressure washing application. It gives you the added length you need so you don’t have to worry about dragging your power washer with you.

Why We Like This:

New and hot release
Delivers what they promise

Best For hundred foot: YAMATIC Power Washer Hose

Buy on Amazon

This kink resistant with smallest bend radius flexible pressure washer hose prevents you from having to stop what you are doing to unkink the hose to get the water flowing again, making cleaning your car, floor, windows, driveway, roof, siding etc. It is made of creative high-quality and fantastic flexible material. It also comes with quick connectors so you can easily hook it up to your power washer and to your wand.

If the outlet for the original pressure hose is 14 mm, this hose will fit as an extension hose with the adapter that comes with the hose. It is easy to tear up on a rough driveway or over the frame of the pressure washer unit. The 50ft length makes it easier to move around without moving the pressure washer. The included quick connectors are easy to assemble and work perfectly.

Why We Like This:

You can easily snug down the fittings with a minimum of hand torque
You can add at least 100ft-200ft and there is no pressure loss
Decent, not as flexible as a flexzilla
Great addition to your existing pressure washer hose

Best For money: Minchi257 High Temperature High Pressure Hose

Buy on Amazon

Not everyone likes to purchase hose for their daily purpose, but the minchi257 high temperature high pressure hose would be an anomoly. This is a pretty solid pressure washer hose that works great and includes the quick connects that really help make it more convenient. The extra length is fantastic and it’s twice as durable as what you get with your power washer. The concrete surfaces get dirty in the winter and layered in pollen in the spring. The hose is really good quality and even though its thicker, still is easily maneuverable.

These are high-pressure fittings you want tight. It includes the quick connects that really help make it more convenient. The house is so much easier to move around without the resistance.

Why We Like This:

You can easy disconnect it from pump and from the gun
Simple setup and great functional hose
Gets way too stiff when under pressure and is pretty unmanageable
Heavy duty hose material with good crimps

Best For boat: MTM hydro High Temperature High Pressure Hose

Buy on Amazon

The mtm hydro high temperature high pressure hose's high-end materials makes sure that it ages well with use. Pressure washer hose replacement that’s rust and corrosion resistant up to 125 hours, nearly twice the industry standard. The rigid and swivel fittings are assembled using ‘bite the wire’ technology to ensure hose ends stay in place during pressure spikes.

Why We Like This:

Delivers what they promise
Good investment for long term