We consider a hitch mounted step to be a worthy investment in the long run.
We are here to help you choose the right one for your needs from all the best available products in market today.
Our review process:
After analysing dozens of steps for the past few months, here are our favorite steps, in a wide range of styles and prices.
Our final collection has the best products and we also worked hard to maintain variety within our selection to accommodate personal preferences.
We have collected steps from several brands including hyper hitches, xprite, bully, heininger, geny hitch etc., specific to your regular usage .
Buy on Amazon
We are personally inclined towards eapele hitch mounted step, it is not so pricy, but it overachieves its purpose and outstanding in important aspects. This trailer hitch step arrives assembled and only has three components inside the box. It works well for 5-10 mph hits but if you get hit at. It has three holes in the tube to allow some flexibility on the closeness to the bumper. It doesn't wabble or make much noise when driving around with it. It comes with a bracket to keep it from moving or rattling in the hitch.
Being this is straight the drop or height of this step is exactly the height of your receiver. It will also protect the rear side while parking at least with sedans and keep the bumper from being damaged.
Why We Like This:
Easily supports the weight of a person
Slides into 2 " trailer hitch receiver opening
Multiple pin holes to ensure a good fit
Holes are adequate size and prevents slipping off bumper
Buy on Amazon
The bully hitch mounted step is the best reliable step on the market today. This hitch mounted utility step allows you to gain easy access to luggage racks, truck beds or suv interiors. It is a multipurpose utility access step that is specifically designed to guard the vehicles in case of rear-end collisions and is widely used for easier access to the roof, bed truck, the cargo area of the vehicle or van. It looks and it makes it easier to reach over the tailgate to access the truck bed.
The utility bumper guard is designed to fit standard 2 hitch mounts. It is suitable for most common-sized hitch receivers. The step is useful when you have an full sized SUV and use it for a Topper or basket. It is sturdy enough to withstand extreme compression and collisions. The step is actually welded a little off so that one side is closer to the bumper than the other. It offers many accessories that are geared toward customization and style.
Why We Like This:
Great for protecting you car from bad parallel parkers
Light weight, excellent fit and finish and strong
Very useful accessory allowing easy reach to the roof-top of a tall suv
Buy on Amazon
We know from years of feedback from readers, customers and amazon sellers, what most people want in a convenient and appropriate step. The cargoloc hitch mounted step is exactly that - it's a simple step that hits all the right notes. This is a very strong and decent looking step. It fits all 2 inch trailer hitch receivers. It has two drilled positions on the tube to choose from when positioning in the receiver. It is the webbing that essentially holds the tie down assembly together, and the cargo in place. The surface of the step is sturdy and provides a grip without fear of slipping.
It's built well and gives you plenty of confidence once you're foot is all the way on it where there's plenty of tread. It's easy to remove when not needed. The step is great especially with the non-slip tread surface.
Why We Like This:
Light weight and easy to handle
Easy to put in and out, lighter weight than most yet sturdy and solid
Buy on Amazon
Best part: heininger hitch mounted step costs comparatively low and it is available to ship in 24 hours. Twistep provides your pet with lower-impact, lower-stress access into and out of a vehicle. There's no heavy, awkward or muddy items that you have to stow in the back cargo area of your vehicle. The actual twistep measures 8.5 inches in height because there is a part that extends above the hitch level. It is beyond easy to use. There is a version for trucks that will extend out far enough to allow the tailgate to be down and still have access to the step.
It is incredibly sturdy. It is adjustable (before installation) to different heights.
Why We Like This:
No more heavy telescoping ramp taking up cargo space
Excellent step, fold-away feature is great
Easy to twist out from under the car and super sturdy
Buy on Amazon
The geny hitch hitch mounted step's superior materials makes sure that it ages well with use. This serrated hitch step is rated for 300 and 500 lb capacity and designed for zero load. It is engineered and designed to be a functional step while towing a trailer. It makes a nice "stinger" for those drivers who want to park a bit too close to your vehicle. It is great in the rear hitch. It's very sturdy and well made. It is compatible with any 2" hitch receiver.
Why We Like This:
Makes getting in and out much easier
Makes the gen y hitch complete
Wet or dry, gives you a sturdy platform to relie on
Buy on Amazon
If you are searching for a satisfactory step for your daily usage, you cannot go wrong with the pofenze hitch mounted step. It is perfectly designed to bring customers high quality and inexpensive products. It is welded by 4"square steel tube and has an anti-skid step pad, so strong and safe enough. It mounts on the receiver tube to keep it from rattling. It is a bumper to keep the step quiet. It makes a difference in reduced step-up height. It fits vehicles with a 2" trailer hitch package included. It works well and adds another level of security. It provides easy access to the storage area and provides maximum protection from rear-end collisions.
Why We Like This:
Very handy if your short and own a pickup
Well made, sturdy and excellent finish
Great sturdy step and even better bumper guard
Extremely sturdy and didn’t even need anti-chatter bolts
Buy on Amazon
Not everyone likes to purchase step for their regular usage, but the koxuyim hitch mounted step would be an anomoly. The Hitch bumper step uses your vehicle’s rear hitch receiver to make climbing in and out of the back of your vehicle more convenient. Once secured this hitch mounted utility step allows you to gain easy access to luggage racks, truck beds or suv interiors. It is made of extremely strong 8ga thick steel, with matte light texture coating for long-lasting corrosion resistance. The Friendly Non-sharp surface ensures users get a secure, comfortable footing at all times.
It fits 2 inch receivers additionally can bear a weight of 600 pounds.
Why We Like This:
Big enough to step up on with non slip grip,built tough
Easy installation ,use of a plug-and-play helps with quick, effortless installation
Steel step pad area with fish mouth design effective anti-skid
Buy on Amazon
Temco's Ta2520 hitch step fits around most trailer hitches and allows you to have a hitch step while pulling a trailer. It is a sturdy step, arrives well packed and functions as it should. It is easy to install and super solid step while retaining the receiver hitch in place. The step and hardware are heavy, and feel extremely sturdy.
This product allows you to keep the bumper step in place and use the trailer ball at the same time. It is a small bit of extra work (mostly just rounding a few edges to get the hitch and step to fit together tighter), but the results are a PERFECT fit. The built-in tightener prevents all rattling or wobbling.
Buy on Amazon
The Curt grip step receiver hitch step is the perfect way to add a convenient and highly useful step up into your vehicle, utilizing your trailer hitch. Whether you're working, playing or doing a little of both, curt towing products enable you and your crew to make memories that will last a lifetime.
The expanded aluminum treads provide unparalleled traction, locking onto your shoe or boot and actively resisting slips and skids. The hitch-mounted design allows you to install it only when you need it. It features a black powder coat finish to maximize resistance to rain, snow, dirt, road salt and more. It is also extremely durable, and the open treads allow dirt and debris to pass through the step, keeping it clean for future use.
Curt offers several different electrical trailer brake controller options to perfectly suit your towing setup and lifestyle. These cargo tie-down straps come with heavy-duty ratcheting mechanisms and are available in a wide variety of capacities, lengths, hook types and colors. This step makes it relatively easy.
Buy on Amazon
The xprite hitch mounted step is suitable and reliable and fits well with your regular usage. Climbing in and out of the back of your vehicle is more convenient and improves rear access to your truck beds or racks. It fits standard 2" inch trailer hitch receivers on tow trucks, pickups, suvs, vans, jeeps, etc. It protects your vehicle's bumper to avoid scratching when the car behind or the rear car hits the rear wall.
The step feature is extremely sturdy with an absolute non-slip design surface. It includes chromed hitch lock and two keys.