The 6 Best Husqvarna Front Axle Bushings (2023 reviews)

Compared with other bushing in this category, the hd switch one wheel has a convenient design. These bearings are built to hd switch specifications that are designed specifically for this conversion. It's easy to remove the old wheel, knock out the bushings (other reviews and/or youtube has directions), clean and install these. There is a raised band about halfway on the cover that should go around/slightly behind the largest washer to hold it in place. This makes the wheels run straight without any loose wabbling.

The wheels are noticeably tighter (less wobble) than when it has bushings installed. It fits tight with a few taps. It is thick enough to keep the bearing from sliding easily. It comes with this conversion you will never need to grease again.

Why We Like This:

Premium hub caps & heat-treated hardware
Synthetic formula hi-temp grease with wear-resistant additives
High temperature grease rated to 400f
Perfect fit for craftsman 7400 pro series

Kintle Husqvarna Front Axle bushing

Buy on Amazon

Bushings are just a metal-on-metal wear surface that sacrifices itself over time. Once you pull the wobbly wheels off of your mower, it is a fairly easy task to knock out the old bushings, clean out all of that grease, then install the new bearings. The original hardened steel bushings are a dumb design. It is a great option to replace worn out tractor wheel bushings.

These bushings fit good and tight and corrected wheel wobble. The grease just attracts dirt and the grit grinds away at the bushing and axle until the wheel wobbles. It is quite easy to remove the fitting, then put it back into place once you've gotten the bushings out. It COULD be advisable to 'lightly' grease the metal axle before sliding the wheels back on, but this would only be to protect the axle itself from any future rust or corrosion.

Why We Like This:

Great to rid myself of bushings
Grease plus grit equals virtual sandpaper constantly grinding away at anything it touches
Much quiter and easier to steer

Amthkno Lawn Mower

Buy on Amazon

For a low asking price, amthkno lawn mower has managed to overwhelm their customers by packing as many features as they could. It is suitable for lawn mower, wheelbarrows, garden carts, hand trucks, etc. It's a simple process, remove the C-clip and spacers, then pull the wheel off and remove any other spacers. It allows dust into the grease, and this wears the axies. It is easy to install and upgrade over bushings.

This kit has everything needed to convert the wheels over to bearings. It is fit for john deere front wheel bearings and axle rebuild kit. It's pretty quick and easy to change them out, taking longer to clean the dirt off of the axles and wheels than anything else.

Why We Like This:

Perfect upgrade from the ones u have to grease & cheaper
Takes the side to side slop out of the steering versus the stock bushings
Excellent bearings installed in 10 min

HD SWITCH Husqvarna Front Axle bushing

Buy on Amazon

Not everyone likes to purchase bushing for their daily usage, but the hd switch husqvarna front axle bushing would be an anomoly. These are a great upgrade to the OEM steel flange type. It takes a decent sized punch and hammer to knock them out on both sides of the wheel.

Why We Like This:

Reduce tire wear and eliminates bushing replacement
Premium hub caps & heat-treated hardware
More wheels wobbling and falling off
High temperature grease rated to 400f

Patilsi Husqvarna Front Axle bushing

Buy on Amazon

The patilsi husqvarna front axle bushing is the best reliable bushing on the market today. It fits husqvarna ayp/craftsman 121922xsteer column bearing replacement for lawn tractors.

Why We Like This: