The 8 Best inner CV joint Puller Tools (2023 reviews)

Otc inner cv joint puller tool is the epitome of what a great tool should be. It comes with what they refer to as a "Grip Wrench Adapter. The cone attachment that guides the bearing puller jaws could probably benefit from a steeper cone angle. It can be used as conventional hub pullers with the supplied hardened. It has an adapter for locking pliers. The fit and finish is very good and the set is robust and complete.

The quality of this tool is amazing. The slide hammer is perfect and looks to be built very well, all pullers are built with the best quality.

Why We Like This:

High quality product, vice grip attachment is genius
Very well made, the hub attachments are solid and not fragile castings
Made short work of some rear wheel bearings
Super high quality and a nice blow molded case

Best With u: Tiger Tool inner CV joint Puller Tool

Buy on Amazon

The tiger tool inner cv joint puller tool is satisfactory and appropriate and fits well with your daily usage. This tool is excellent for driving out old u-joint, pushing joint from side to side to position c-clips, and pushing the "ears" apart so the installed joint has the proper amount of play. It's perfect for both rear drive shaft and front drive shaft.

This is for U-Joints on the drivehaft. It's sized based on the size of your U-Joint. It is manufactured from high-grade materials for strength and durability and eliminates dangerous vice-and-socket or hammering methods. This tool will save you a lot of time, busted knuckles, and will keep you from saying a lot of bad words.

Why We Like This:

Huge time saver for removing stubborn u-joints
Works great on stubborn, frozen u-joints
Delivers what they promise

Best For Small CAR: Orion Motor Tech inner CV joint Puller Tool

Buy on Amazon

Compared with other tool in this category, the orion motor tech inner cv joint puller tool has a convenient design. This cv joint puller tool set by orion motor tech is compatible with ford taurus and mercury sable models from 1986 to present, loosening and removing their front wheel drive axles and hidden retaining rings in minutes. It fits good for most all cv axles including atvs and side by sides. It offers superior durability and corrosion resistance for long use.

The u-shaped cv joint fork has a 2-inch opening and 2.4-inch depth to firmly lock onto your sable or taurus axle assembly, making removal of stuck cv joints a cinch. It has smooth action and really comfortable in hand. It will work with pretty much any front wheel drive vehicle that you are removing the cv axle that snaps in place. Its threading also lets you use it with other 5/8"-18 adapters to deal with other makes and models or to handle other work around your engine. The tool itself is a nice solid hammer.

Why We Like This:

Extra grip comfort, and the bar can't slide out
Good brand reputation

Best Quality Tool: ABN inner CV joint Puller Tool

Buy on Amazon

Best part: abn inner cv joint puller tool costs comparatively low and it is available to ship in 24 hours. The heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. It provides strength and durability, while the t-handle and 5 lb. The cv joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps. The tool will work for pulling a CV axel, provided the part that slides behind the cup fits.

The shaft would be somewhat easier to use if a bit longer but is a good weight to pull cv axels. The connection to the cup needs to be as close to dead center as possible, so the folded metal end is bent into a spread V shape with the pointy end flat and bolted to the rod end of the tool.

Why We Like This:

Worked well pulling a front cv axle for a 4th gen 4runner
Rugged, low priced & does it’s job
Proper maintenance and care for your tools is essential
Well constructed & very easy to use

Best With Slide Hammer: CTA Tools inner CV joint Puller Tool

Buy on Amazon

Next on the list, we've got yet another tool that manages to win our hearts. It's the cta tools inner cv joint puller tool and it's widely considered as one of the best convenient tool you can buy. If you are a DIY type person then this is a must have for your tool box especially for removing cv axles. It has a 5/8"-18 UNF threaded hole, the same as most full size slide hammers. The cv puller can be attached "backwards" onto the slide hammer bar, again without the hammer, and used to hammer axle away from yourself using a sledge hammer. It fits perfectly behind the axle. The tool is very well made, and shows no signs of bending. It allows for strength and durability.

Why We Like This:

Makes cv axles so much easier
Works at removing a stuck cv axel on a 2005 odyssey
Works great and saved a lot of time
Excellent for removal of rav4 cv axle

Best With Ford Taurus And Mercury Sable models: MOSTPLUS inner CV joint Puller Tool

Buy on Amazon

Best part: mostplus inner cv joint puller tool costs comparatively low and it is available to ship in 24 hours. The stainless steel, MOSTPLUS CV joint removal set provides strength and durability for the long haul. The U-shaped cv joint fork has a 2-inch opening and a 2.4-inch depth, which can be securely locked on your sable or taurus axle assembly to remove the stuck cv joint easily.

The heat treated FWD axle puller adapter with black or chrome plated, each part offers superior durability and corrosion. These cv joint puller tools work together to provide a straight and uniform force to make your constant velocity shaft pop out smoothly, and make the roller bearings in the universal joint and other vehicles untouched. It provides strength and durability for the long haul.

Why We Like This:

Lot of satisfied buyers
Good investment for long term

Best With Rock Edition: Ecowlboy inner CV joint Puller Tool

Buy on Amazon

Ecowlboy makes beautiful and great tool with classic and smartly choosen materials. This tool kit is specifically designed for removing and installing inner CV joints on front-wheel drive vehicles, which typically have different CV joint designs and sizes compared to the drivetrain of an off-road vehicle like the Polaris RZR. It includes opening 63mm and 48mm cv joint fork disassembly adapter, the cv joint fork is threaded internally, and the slide hammer stick is threaded externally. It is made of heavy-duty steel, which can withstand huge pressure without deformation, is not easy to break, and is more durable.

The joint fork can fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, with wide use. It comes with this cv axle removal tool and the axle assembly is popped out of the trans axle, and install the new axle, not need to spend a lot of effort.

Why We Like This:

Slide hammer made of heavy steel
Lot of satisfied buyers

Best For professional Auto mechanics: Kasclino inner CV joint Puller Tool

Buy on Amazon

The kasclino inner cv joint puller tool should be able to handle its purpose and duties with ease. It protects your vehicle, unlike pry bars or cv axle fork tools, the cv shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint. It is used to pull front wheel drive axles with retaining rings from the transaxle, and will not damage joints.

The cv joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps. It is made of heat-treated carbon steel material, durable and sturdy. It is designed for professional auto mechanics and heavy duty applications.

Why We Like This: