It is important to have the best intake head gasket. We are here to help you choose the best one for your needs from all the best available products in market today.

Our review process: Show/Hide

Our Top Picks:

Best Overall: Buy: Felpro Superior Seal READ REVIEW

Best With Fast Shipping: Buy: Felpro Intake Head Gasket READ REVIEW

Best For Great Quality: Buy: Mahle Original Intake Head Gasket READ REVIEW

Best With Part Numbers: Buy: Mnjws Intake Head Gasket READ REVIEW

Best For Exact Fit: Buy: Limicar Intake Head Gasket READ REVIEW

Best For Quick Delivery: Buy: Limicar Intake Manifold Gasket READ REVIEW

Best For Milled Heads: Buy: Speedway Motors Intake Head Gasket READ REVIEW

Best Overall: Felpro Superior Seal

Buy on Amazon

If you often find yourself scrambling for a good gasket, Felpro Superior Seal is your solution. The felpro superior seal was installed quite nicely and it changed out the sensors. Symptoms of a failing intake manifold gasket include. These not only cause unsightly stains but may lead to serious problems if not repaired.

The gasket comes with repeated exposure to heat cycles, dirt and debris and lack of cooling system maintenance, The intake manifold gasket can become brittle and crack, leading to gasket failure. And, the gasket is strong and it improves performance. Above all, the felpro superior seal is perfect for high quality, It is made well and has been designed for imperfect sealing surfaces.

Most buyers find that the gasket is better than the stock as it is worn out. Also, a few say that the gasket has worked great and there are no obvious leaks or codes. Further, a few strongly agree that the seal height is three times higher compared to the oem part. As a result, buyers were very happy to recommend it to friends and would-be buyers.

• This includes new gaskets and seals for the egr valve as well.
• Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal.
• Fel-pro gasket sets include every part needed for the repair unless otherwise noted.
• This is the upgraded metal gasket that gm should have used to begin with.

Best With Fast Shipping: Felpro Intake Head Gasket

Buy on Amazon

Next on the list, we've got yet another gasket that manages to win our hearts. It's the Felpro Intake Head Gasket and it's widely considered as the gasket that has the most suitable features. The felpro intake head gasket is applicable and it is good for fast delivery. Use this if the engine overheats, The extra heat can stress the gaskets, over-compressing them and the gasket material may not recover to provide adequate sealing. These not only cause unsightly stains but may lead to serious problems if not repaired.

The gasket is manufactured specifically for the repair environment to help seal imperfect sealing surfaces. Finally, the felpro intake head gasket comes with repeated exposure to heat cycles, dirt and debris and lack of cooling system maintenance, the intake manifold gasket can become brittle and crack, leading to gasket failure.

Most customers agree that the gasket can be used on cheap small block engines for hot rods. In addition, a few also found that the gasket is great for edelbrock manifold install. Further, a few strongly agree that the gasket will not line up nor have the same bolt pattern as a 1984 350.

• This is blue and it is easier to install.
• This is great with fast shipping and it comes with part number.
• This is made of different materials that have different expansion rates which scrub the gaskets.
• This is designed for easy installing and is designed for imperfect sealing surfaces.

Best For Great Quality: Mahle Original Intake Head Gasket

Buy on Amazon

Mahle Original offers a variety of gaskets for personal choice and yet maintains quality in all the variants. The Mahle Original Intake Head Gasket is compatible with part number and it comes with excellent quality. Make sure this fits by entering your model number. And, it has a knock sensor harness and it is designed for a great price.

Above all, the mahle original intake head gasket is the leader in domestic, Asian and European applications.

Most buyers opine that the gasket does not include all of the required gaskets and seals. In addition, a few say that the gasket includes 2 grommets. In addition, they strongly agree that this kit has the plastic intake gasket, not the better and more expensive metal fp gasket.

• This includes the valley pan gasket but not the required knock sensor gaskets.
• This includes only 8 of the 10 upper intake bolt seals.
• This includes the correct grommets for the intake manifold bolts.
• This comes with a nice gasket set and it is strong.

Best With Part Numbers: Mnjws Intake Head Gasket

Buy on Amazon

The Mnjws Intake Head Gasket might be a relatively new release, but it's still nothing short of impressive this year. The mnjws intakehead gasket is great for intake manifold gasket kit and it fits the following vehicles. Make sure this fits by entering your model number. In addition, this is not a genuine acdelco for fel-pro intake manifold gasket, but it works even better and lasts longer.

The gasket was installed easily and it has replaced part numbers. Most importantly, the MNJWS intake headgasket is strong, comes with part numbers and it comes with direct fit.

Most customers agree that the gasket is a great fit and stayed in place during installation. Further, they say that the gasket could be used on a 2007 chevrolet avalanche. Also, a few also found that the gasket fit right, holes in the right places. With no doubts, this product passed the test and had very satisfied buyers eager to share their experience.

• Save yourself time and money by replacing intake manifold gaskets yourself.
• It runs better, is great for a great price and it worked perfectly.
• Lot of satisfied buyers.

Best For Exact Fit: Limicar Intake Head Gasket

Buy on Amazon

Compared with other gaskets in this category, the Limicar Intake Head Gasket has a convenient design. The limicar intakehead gaskets are designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports. Make sure this fits by entering your model number. And, the gasket provides all kinds of valve cover gasket, intake manifold gasket, head gasket set, head bolts etc, meeting almost all the requirements of the customers.

Most importantly, the limicar intake headgasket is highly recommended and also is the world’s leading online automotive parts.

Most buyers agree that the gasket is perfect for the model needed.

• Manufacturer says: we offer a complete selection of led trailer light kit.
• This is great for high quality and it comes with part number.
• Good brand reputation.

Best For Quick Delivery: Limicar Intake Manifold Gasket

Buy on Amazon

The Limicar Intake Manifold Gasket is suitable and reliable and fits well with your daily use. The limicar intake manifold gasket provides all kinds of valve cover gasket, intake manifold gasket, head gasket set, head bolts etc, meeting almost all the requirements of the customers. Please check the description and compatibility chart before you purchasing. In addition, this is compatible with part number and it is designed for a great price.

The gasket is to seal the cylinders to ensure maximum compression and avoid leakage of coolant or engine oil into the cylinder. Finally, the limicar intake manifold gaskets are designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.

They say that this intake manifold gasket set can fit a 1998 oldsmobile 3.8l 4 - door vehicle. Without any doubt, this product passed the test and had very satisfied buyers eager to share their experience.

• Manufacturer says: we offer a complete selection of led trailer light kit.
• This is highly recommended. Additionally, it is the world’s leading online automotive parts.
• This is made for quick delivery and it is built with high-quality materials.
• This beats the competition and it is perfect for high quality.

Best For Milled Heads: Speedway Motors Intake Head Gasket

Buy on Amazon

Speedway Motors is known for creating pragmatic and minimalist gaskets for people on the go, and its line of speedway motor intake head gaskets definitely falls in line with that reputation. Also, it is designed for milled heads/intakes. Manufacturer says: Today, we stock and manufacture automotive parts so you can build what you want. Finally, the Speedway Motors Intake Head Gasket fits chevy fits v8 engines.

• Had to use a silicone gasket maker.
• Speedway motors is comprised of people, just like you, who love cars.
• The Manufacturer says: With speedway motors, we know how fast you chase your dreams.
• 060" or .125" thick gaskets (no end seal).