The 8 Best IR beam Emitters (2023 reviews)

The bafx products ir beam emitter should be able to handle its purpose and duties with ease. It may take a little poking around to locate the IR receiver on your devices but other than that it's pretty straight forward. The BAFX unit uses STEREO TRS (tip/ring/sleeve) connectors for the IR Receiver unit. It works very well right out of the box, conceals very well, and the transmitters operate very effectively. This ensures that there are no in between interference.

The Pro's Works great, wires are thick to take through the wall, works fine on the cable box & dvd player located inside cabinets, Very easy to setup & it comes with more than enough emitters. It can be powered via a USB printer cable or supplied power supply. It's made with high quality parts so it should last for years. It's easy to set up, even for a non techie.

Why We Like This:

Sweet contraption and easy as pie ssetup
Simple solution to get your setup hidden, clean and looking nice
Keeps a nice clean look with no wires visible

Best For behind door: Icespring IR beam Emitter

Buy on Amazon

The icespring ir beam emitter is satisfactory and appropriate and fits well with your daily usage. It is strictly a wired ir receiver/transmitter system. It comes with all of them one wire has more than one eye. The receiver eye is small enough to tuck away in the corner of a tv and not be seen. It's nice and clean with all the equipment and cables hidden. The IR Repeater Kit comes with broadband remote control, and it is compatible with almost all the electronics appliances in the market with its wide frequency range.

It is comparable with any satellite tv, cable tv, blue ray, Apple TV etc. Very easy to conceal and the stick on transmitters are perfect to set up without having to modify.

Why We Like This:

Lag, no issues with the receiver seeing the signal from the remote etc
Inexpensive solution to extend ir remote
Very small footprint inside the cabinet
Great little kit to use remote controls inside cabinets

Best With No Signal degradation: C2G IR beam Emitter

Buy on Amazon

Best part: c2g ir beam emitter costs comparatively low and it is available to ship in 24 hours. This simple-to-use repeater kit is absolutely intuitive. Not only does the unit itself work great, it improves the performance of existing remotes as it's IR pick-up is extremely sensitive. The two IR repeater cables are also 9' long and each has two IR repeater ends that send the remote signal. The blue light on the receiver is great.

This IR repeater is much more accurate, has amazing range and takes up little space. Installation is easy since everything has sticky tape on it, the main unit is metal and feels solid and of quality. It's simple to set up right out of the box. In other words, this IR system is really meant to be used in a "closed" environment, with the units you want to control inside a cabinet with the door shut.

Why We Like This:

Set up and use is easy
Good brand reputation

Best For Harmony hub: Obvis IR beam Emitter

Buy on Amazon

Obvis is known for creating pragmatic and minimalist emitter for people on the go, and its line of obvis ir beam emitter definitely falls in line with that reputation. It works with a 38khz device that is commonly used for most devices. It allows you to emit ir signals to a location that your remote control or ir repeater system block can’t reach. This cable plugs directly into the IR out port on the back of the Xbox One S and the cord is plenty long to reach just about anywhere you need it to. It’s perfect for the money and easy to hook up.

It’s a simple ir emitter, but it works great. It is perfect ir sensor for xbox ones. They are not a blaster and thus do not require any more power than a normal emitter.

Why We Like This:

Works for xbox one media remote
Easy programming set up, works great
Has peel and stick tape on the back for easy mounting

Best With Alexa: Gikfun IR beam Emitter

Buy on Amazon

Best part: gikfun ir beam emitter costs comparatively low and it is available to ship in 24 hours. The Morse Code 'pulses' are much wider than normal IR clock pulses. This pin feeds the (-) side of the IR emitter. It can be used for remoter control, and can be compatible with a wrobot digital 38khz ir transmitter sensor. It comes with signal indicating led, easy to observe and debug.

This ir transmitter sensor module is directly launched by a single tube, and it requires waveform modulation through the program. It is suitable for infrared communication, infrared remote control, and apply to a variety of platforms including arduino/51/avr/arm. The transmitters are standard IR emitting LED's. It will work with any microcontroller including a raspberry pi.

Why We Like This:

Captured tv remote signals with ease
Apply to a variety of platforms including arduino/51/avr/arm
New and hot release

Best For Android: Highrock IR beam Emitter

Buy on Amazon

The features department is where highrock ir beam emitter truly manages to shine. You can control your home theater device/components which are kept behind closet doors or in a closed cabinet by this ir repeater system kit. It uses a small ir blaster to be mounted on the ir of the device. The small ends are the emitter and the large end of the receiver. The red LED lights up brightly when activated by your remote, but the green standby LED is nicely dim so it doesn't light up the room at night. It's just bright enough for you to see that it's on.

This is a repeater system and should work with any tv, cable box, dvd, or vcr audio receiver. It has an ir controller so it will work.

Why We Like This:

Remote signals are still instantaneous and reliable
One of the new comers and featured product

Best With Charter communications DVR: MAXZONE IR beam Emitter

Buy on Amazon

If you often find yourself scrambling for appropriate and satisfactory emitter, maxzone ir beam emitter should be your first option for buying. It works with Logitech Elite with adapter, amazing products. These small emitters have a self adhesive pad that allows it to be stuck directly to the ir sensor window of your av device, or can be used as a flood for multiple devices when properly mounted. It allows you to emit ir signals to a location that your remote control or ir repeater system block can't reach.

The head (3.5MM jack) is a good size. The LED inside of it only emits Infrared light, which is not visible to the human eye, and even then it is only when you press a button on your TV remote. It is easy to route wires and the adhesive sticks. The mini connector fits firmly. It is perfectly for the xbox one first gen.

Why We Like This:

Extend remote control ability to any room in the house
Very easy and simple setup, and connect to tv super quick
Delivers what they promise

Best For Tv cabinets: Urwoow IR beam Emitter

Buy on Amazon

We know from years of feedback from readers, customers and amazon sellers, what most people want in a convenient and appropriate emitter. The urwoow ir beam emitter is exactly that - it's a simple emitter that hits all the right notes. You can control your home theater device/components which are kept behind closet doors or in a closed cabinet by this ir repeater system kit. It comes with a 5v usb ac power supply and operating range from 34 to 60 khz that support amplifier, cable box, stereo receiver, satellite tv receiver, cd player, dvd player, blu-ray player or any other components which are controlled by ir signal. It is perfect for hiding stb, ott, very easy to install and no configuration required.

You can use it to repeat samsung tv signal to the logitech surround receiver flawlessly. It comes with 1 receiver which picks up the signal from the remote controller, and the receiver is with a convenient ir confirmation led. The receiver needs power (USB port) and the connection to the repeater outputs. It is really working well to add to that it is good for extending range. It works well and is compact with the usb power instead of a big control unit.

Why We Like This: