The 6 Best irrigation Pump Low Pressure switches (2023 reviews)

It is easy to control water flow into and out of tanks and valves with a sump pump float switch by water boss. This universal bilge pump switch and septic float provides reliable measurement and control of water levels for both empty and fill applications. The float switch is actually just controlling the contactor which uses less than an amp. The float switch is operating a contactor or relay that is opening and closing both legs at the same time.

The best feature of this float is the ability to use it in a normally open or normally closed configuration. The water boss utility pump float switch helps eliminate the potential for water damage with minimal to no oversight after installation. It is used to detect high levels. The float switches come with clear instructions so you can use them in either position.

Why We Like This:

Good solution for a high amperage float switch
New and hot release

Best With Controller: PUMPSPY irrigation Pump Low Pressure Switch

Buy on Amazon

The pumpspy irrigation pump low pressure switch is capable of outshining several other switch featured in this list in overall features for the price point. These have a replacement float switch ready when you need it the most. This switch has a "pass-through" socket that plugs into the outlet and the pump then plugs into this. It includes a hose clamp and cord grip for easy installation onto the pump's discharge pipe. The float part is mounted where the water will raise it up as it floats until the switch trips, then it will turn back off when the float settles.

This is used as a float switch in a septic sewer sprinkler system and it works. It is designed to shut off when the water level drops. The mounting design is great for extended life.

Why We Like This:

Works good setting on & off adjustment can be trickey
Works well hose clamp and fittings worked good
Well made float level control system

Best For an emergency pond shutoff Switch: little Giant irrigation Pump Low Pressure Switch

Buy on Amazon

Not everyone likes to purchase switch for their daily purpose, but the little giant irrigation pump low pressure switch would be an anomoly. When combined with a Little Giant sump pump, it works well for getting water off of a pool cover. It is good for a sump pump application because it has a narrow range, i.e., if the pump is running the water level only needs to drop about 2" before it shuts off. The turn on range is 8+" and the turn off range is. It is automatic, if in about 1/2 inch of water or more it kicks the pump on. The pump must be fully submerged when operating in order to cool itself.

It is ideal for use with utility pumps, hydroponic pumps or fountain pumps.

Why We Like This:

Low level switch is ideal for utility pumps
Screws are included to attach to the pump
Good pump switch for certain applications
Designed to operate in water the compact design works well in limited space

Best American Product: generic irrigation Pump Low Pressure Switch

Buy on Amazon

We know from years of feedback from readers, customers and amazon sellers, what most people want in a convenient and appropriate switch. The generic irrigation pump low pressure switch is exactly that - it's a simple switch that hits all the right notes. It would be perfect with any type of well water pumps, submersible pumps, air compressors and any other type of water and air pumps. The lower (Red) pump is the low pressure pump that pulls from the tank and pressurizes the smaller blue bladder tank as well as another larger tank outside the pump house with storage at 60 psi. The plumbing is such that if the High pressure pump quits the Low pressure side automatically keeps feeding water.

The wire marked “Power” goes to your power source, the wire marked “Out” goes to the pump. It prevents your pump from burning out if there is no more water at the source. These are labeled on the back for power in, and switches power out. It works perfect and is so much better than the old spring and nut system. It has an automatic feature that stops the pump in case of well water shortage.

Why We Like This:

Works great for the on and off pump
2 hp at 85% efficiency is about 8 amps
Adjustable hi/low pressure as simple as pressing a button

Best With alarm: Uxcell irrigation Pump Low Pressure Switch

Buy on Amazon

The uxcell irrigation pump low pressure switch gives the top-tier switch a run for their money by offering flagship specs at a much more affordable price. It is a type of liquid level control device with simple structure and convenient use. It can be easily converted from normally open to normally close by inverting the float. It can be used in pumps, indicators, alarms or other devices. It can not directly control solenoid valve or high power relay, ac contactor, etc. It is used for water level control of swimming pool, fountain, pond, waterfall, etc. It has the advantages of small volume and long working life compared with a general mechanical switch.

The float switch can be installed at the top or bottom of the tank, depending on whether you want to detect water rising or falling.

Why We Like This:

For irrigation (automatic irrigation), hydroponic system
Lot of satisfied buyers

Best For three months: Ortis irrigation Pump Low Pressure Switch

Buy on Amazon

We know from years of feedback from readers, customers and amazon sellers, what most people want in a convenient and appropriate switch. The ortis irrigation pump low pressure switch is exactly that - it's a simple switch that hits all the right notes. This switch is designed for 120v. It has strong corrosion resistance and never needs to be cleaned. The sensors and sensor wires are the only part which would touch the water. The alarm would recognize when it's low and turn the pump on and recognize when the tank is at the level you set and turn off the pump. The high/low system works well and prevents the pump running too frequently but works best when they are at least 12" apart vertically.

The mode selection is nice and it supports several operating philosophies which it remembers through a power failure. This shuts off the return pump if the water level gets too high. It can be used in various application scenarios, stable and safe.

Why We Like This: