The 8 Best Jk Rear Axle Shafts (2022 reviews)

The look and feel of these shafts are consistent with the high quality we're used to from the rest of USA Standard Gear's lineup. The USA standard gear jk rear axle shaft is good for u-joints and it is more. Make sure this fits by entering your model number. And, the shaft would be perfect for fast shipping and it comes with axle seals. Lastly, the USA standard gear jk rear axle shaft fits well and it has reverse rotation.

Most customers opine that the shaft fits a dodge ram 2500 1999. Further, they say that the shaft fits well and was installed without a hitch. In addition, a few also found that the shaft is a cut to fit the shaft, and may need to be shortened to fit your application. To sum up, buyers found this to be one of the best shaft for daily purposes.

Customers also found that its wise to buy a ford excursion rear bumpers with tire carrier, along with this shaft.

Top Customer Quotes:

This can slide into side gear further without issue.
This fits stock, and oem quality replacement hubs.
This will fit the stock spindle.
This is pretty close to the listed 28.813.

Best For Great Quality: Yukon Gear Jk Rear Axle Shaft

Buy on Amazon

For a low asking price, Yukon gear jk rear axle shaft has managed to overwhelm their customers by packing as many features as they could. The Yukon Gear Jk Rear Axle Shaft includes a forged pinion yoke, transfer case yoke, and necessary retaining hardware. Yukon performance driveshafts offer the highest quality upgrades for your driveshaft needs. Moreover, this allows for increased driveshaft angles, made of great quality and it is perfect for great quality.

The shaft is easy to install, is fitment, it is great for u-joints and has an upgrade design. Also, the shaft is held to strict tolerances then precision welded and computer balanced to provide. Lastly, the yukon gear jk rear axle shaft comes with all the hardware and small parts necessary for installation.

One customer says - "So at around 30 mph you get this vibration. ". Most buyers opine that the shaft is heavier than the stock part. To sum up, at the price, they believe that they got a steal of a deal with it.

Few customers got jk rear track bar bracket, along with the shaft.

Why We Like This:

When your vehicle demands performance, durability, and strength, choose yukon performance drive-shafts.
Double cardan cv joint reduces driveline vibration.
Allows for increased driveshaft angles - up to 26 degrees.
1310 u-joints & u-bolts and recommended for up to 4.5" lift.

Best For High Strength: Yukon Gear Driveshaft Assembly

Buy on Amazon

If you often find yourself confused about the appropriate and satisfactory shaft, Yukon Gear Driveshaft Assembly should be your first option for buying. The yukon gear driveshaft assembly comes with all the hardware and small parts necessary for installation. Providing an upgrade over stock drive lines, this complete drive shaft assembly comes with everything you need for an easy, bolt-on install in your jeep wrangler jk. And, this allows for increased driveshaft angles and it is best for high strength.

The shaft is fitment, it allows for perfect fit and has an upgraded design. Lastly, the yukon gear driveshaft assembly reduces driveline vibration and is also manufactured to meet the rugged demands of off road use.

One customer says - "It a must if you use it, but if you only cruise the mall stock will work. ". Almost all customers quickly discovered that the shaft comes with u-bolts instead of straps for the front, spicer joints installed, etc.

Why We Like This:

This is easy to install and it is designed for exceptional performance.
1310 u-joints & u-bolts and recommended for up to 4.5" lift.
This is great for u-joints,. It is designed for a great price and has a perfect design.
Yukon performance driveshafts offer the highest quality upgrades for your driveshaft needs.

Best For Axle Bearings: Yukon Jk Rear Axle Shaft

Buy on Amazon

We know from years of feedback from readers, amazon sellers, and family and friends what most people want in a convenient and appropriate shaft. The Yukon Jk Rear Axle Shaft is exactly that - it's a simple shaft that hits all the right notes. The yukon jk rearaxle shaft is made from a 1040 alloy steel, while aftermarket performance shafts are made from a 1541h or 4340 chromoly alloy for significant strength gains. Make sure this fits by entering your model number. These axles are engineered to stand up to the extreme conditions of hard street driving, trail running or weekends at the track.

The shaft comes with a new axle, is great for a great price and it is perfect for high quality. Finally, the yukon jkrear axle shaft fits perfectly and it allows for perfect fit.

Almost all customers opine that the shaft will last for years to come. Further, a few strongly agree that the shaft works well, but not quite as advertised.

Why We Like This:

Jk non rubicon dana 44 rear axle assembly.
The Manufacturer says: if you’re looking for strength and durability, we can help.
This is the final part of a differential that transfers power to the wheels.
This dual heat-treating along with the high-quality material gives you a 35.

Best For Wheel Studs: Yukon Gear Axle Jk Rear Axle Shaft

Buy on Amazon

The Yukon Gear Axle Jk Rear Axle Shaft is satisfactory and appropriate and fits well with your daily purpose. The yukon gear axle jk rear axle shafts are for the right hand and it would be perfect with excellent quality. Make sure this fits by entering your model number. Further, it is good good quality and it is ready to install. Most importantly, the yukon gear axle jk rearaxle shaft includes axle shaft, axle bearing, seal, bearing retainer, abs tone ring, and wheel studs.

Most buyers found that the shaft had been in for about a month with no issues.

Why We Like This:

Jeep wrangler jk non-rubicon axle kit (1 side) left or right hand.
Good investment for the long term.

Best For Right Hand Side: Spicer Right Front Axle Shaft

Buy on Amazon

We would, of course, be remiss if we didn't mention the Spicer Right Front Axle Shaft for regular usage. The spicer right front axle shaft is made for the right hand side and has a perfect design. Spicer parts are built to meet or exceed the application-specific original equipment (oe) specifications, so you can count on spicer axle shafts and assemblies to deliver the same quality they bring to Dana's oe axles. And, the shaft includes a tone ring. Above all, the spicer right front axle shaft is great for the right hand and it makes for an easy install.

Most customers agree that the shaft is excellent, but it must be clarified that it is only for rubicon models. And, they strongly agree that the shaft is the jeep catalog for 1999. And, they strongly agree that the 2004785 - 3 axleshaft fits 2007 through 2018 jeep jk with Dana super 44 rear axle, but it only fits if you have an electronic locking differential. Overall, buyers found this to be one of the best shafts for daily purposes.

Top Customer Quotes:

This axle shaft is a genuine spicer oem axle shaft.
Delivers what they promise.

Best For Passenger Side: Spicer Jk Rear Axle Shaft

Buy on Amazon

The Spicer Jk Rear Axle Shaft is the most convenient shaft on the market today. Make sure this fits by entering your model number. Spicer parts are built to meet or exceed the application-specific original equipment (oe) specifications, so you can count on spicer axle shafts and assemblies to deliver the same quality they bring to Dana's oe axles. To sum up, with a 3.5 rating and more than 240 buyers, the spicer jkrear axle shaft stands as the best choice.

Most customers found that the shaft fits the left side (driver side) of 2007. Moreover, they also found that the shaft is a factory replacement part if you have the super 44 found on the rubicon. In addition, a few also found that the 2004785 - 2 axleshaft ( left side axle shaft ) will fit your 2008 wrangler jk as long as you have the electric locking differential. If your jeep has a standard open differential, the 2004785 - 2 will not fit / work.

Why We Like This:

Package dimensions: 17.78 l x 17.78 w x 85.09 h (centimetres).
Country of origin : United States.
Lot of satisfied buyers.

Best For Optimal Performance: Yukon Gear & Axle Jk Rear Axle Shaft

Buy on Amazon

Compared with other shafts in this category, the Yukon Gear & Axle Jk Rear Axle Shaft has a convenient design. The yukon gear & axle jk rear axle shaft is purchased, It is beneficial to also install axle bearings and seals and axle studs. Make sure this fits by entering your model number. These parts are inexpensive and will provide longevity and optimal performance.

Lastly, the yukon gear & axle jk rear axle shaft is important and it is great for high quality.

"The wheel studs were installed, because they made to accomidate two bolt patterns of your choice, so that was a very smart decision on the manufactures end. " - says, one customer. Overall, for almost all buyers, Yukon Gear & Axle product was the most suitable.

Customers say that buying a jk rubicon rear axle shaft, with this shaft made their life much easier.

Why We Like This:

This includes axle shaft, axle bearing, seal, bearing retainer, abs tone ring, and wheel studs.
Includes axle shaft, axle bearing, seal, bearing retainer, abs tone ring, and wheel studs.
This dual heat-treating along with the high-quality material gives you a 35.
Jeep wrangler Jk rubicon left rear axle kit.