The 8 Best KEMIMOTO Fender eliminators (2023 reviews)

The eliminator is a must have addition for your daily purpose. This 2023 z650 fender eliminator comes with a rubber ring for protecting the cables to avoid scratch. It fits snug right into the stock opening. It's under the frame bracket, so you either put a screwdriver through a hole and bend the under cover down until you can get it, or you can go under it with a low profile driver. It's a type of washer that pushes the rubber outwards so it doesn't pop out of the channel. There's a screw holding the stock one on even after you remove the bolts.

The rear edge of this hardware has a 45'ish degree cut and it fits perfectly. It's just shove in the lights, fish the wires, and tighten the nuts on the studs. It's easy to transfer all of the bits from one to the next.

Why We Like This:

Rugged bracket for that clean look
Simplicity and solidity all in one affordable package
New and hot release

Best For two of The holes: KEMIMOTO License Plate Holder

Buy on Amazon

If you want nothing but the best reliable eliminator, then this product is the one you should definitely consider, as it manages to bring a lot to the table. This fits on a 2022 Triumph Speed Triple 1200 RS Motorcycle, perfectly. It feels solid and well put together in hand and is sturdy once mounted to the bike. It's aluminum so easy to drill a new hole, make sure you center-punch first as it's easy to veer off. The adjustment is good to get the angle right, and it fits well.

The spacing on the mount is perfect for two of the holes left from fender removal. There's a scarcity of license plate holders that also host the turn signal lights. It's a Universal fit bracket. The ability to articulate it is very handy and it comes with a light if you decide to wire it up for night riding. It's easy to install and definitely worth the money.

Why We Like This:

Good build quality, great anodizing and machining
Hangs under the frame after mounting
New and hot release

Best With Your Motorcycle: KEMIMOTO Universal Fender Eliminator

Buy on Amazon

Compared with other products by Kemimoto, the kemimoto universal fender eliminator has a convenient design. Although it's actually designed for a motorcycle, it works really well on a Polaris RZR, if you have a rear bumper. It can clearly highlight the license plate in the night driving. It will rub against the rear tire if you do not adjust your rear suspension, but then again adjusting the suspension for a license plate holder on your motorcycle is stupid to begin with. It fits well and can be modified if required.

The adjustable range of the mounting hole is 30115mm, fender eliminator is almost compatible with all of the models. The spacing on the mount is perfect for two of the holes left from fender removal.

Why We Like This:

Super sturdy and really nice machine work
Lot of satisfied buyers

Best Plate Holder: KEMIMOTO Fender Eliminator Kit

Buy on Amazon

The kemimoto fender eliminator kit is capable of outshining several other products featured in this list in overall features in its price range. The bracket part that goes into the motorcycle right under your seat only uses 2 bolts to secure itself to your motorcycle. It is compatible with z400 z650 z750 z800 z1000 z750r er6n zx10r. All the needed adjustments for a proper final angle are there, and overall it is sturdy and looks far better than the oem bracket.

The adjustable range of the mounting hole is 30115mm, fender eliminator is almost compatible with all of the models. Tightens up tight and rattles and does not move, comes with led light but the mounting holes work with stock light (bonus) you do have to widen the electric connector hole to get stock through but worth it. The frame is sturdy and installs easy.

Why We Like This:

Good brand reputation
Lot of satisfied buyers

Best With Fender Eliminator Kit: KEMIMOTO hardest part

Buy on Amazon

The kemimoto hardest part's high-end materials makes sure that it ages well with use. This is a great quality fender eliminator because it is very solid and you can use your stock turn signals and license plate light or after market ones. It is definitely a upgrade from oem and makes the bike even sexier. The stock signals mount using a rubber grommet and metal backplate/stopper that screws in. It fits with threaded extensions to the mounting bolts.

The turn signal might be snug enough to stay put without them, but you'll leave a gaping hole where water, rocks, mud, and other debris can make it *into* your actual turn signal housing and cause issues. It sheds a few pounds and it looks way better. It comes with any hardware except for the four mounting bolts and nuts.

Why We Like This:

Easy installation and bike looks awesome
Awesome look, great build, an absolute butt to install oem turn signals into
Fits stock z400 under-pillion fender mount

Best For price: KEMIMOTO Fender Eliminator

Buy on Amazon

Kemimoto has been making great eliminator for years, thanks to a combination of clever design and appropriate materials. The Z125 pro license plate holder can tidy up your motorcycle well and definitely improve the look of your bike. It is installed on a 2022 Z125 Pro and it is a very sturdy product that looks very good compared to the big plastic OEM part. It is in great shape with a quality finish. All of the cnc’d holes are a perfect fit and ensure the lights and blinkers are facing exactly as they should be.

This is well constructed and very sturdy. It is thanks to making a quality affordable fender eliminator. It is easy to run the wires and get it installed.

Why We Like This:

Easy install, factory lights fit right in
Lot of satisfied buyers

Best For Stock Signals: KEMIMOTO Motorcycle License Plate Bracket

Buy on Amazon

This fender eliminator fits with the mt09 bike perfectly, the turn signals can be installed on this mt09 fender eliminator directly. This motorcycle license plate bracket comes with 4 bolts 4 nuts 4 washers, 3 rubber seal and 1 rubber ring, the rubber ring for protecting the cables to avoid scratch. It is much sturdier than other fender eliminator kits.

This fender eliminator kit is made of aluminum alloy, the design is solid and sturdy. It comes with a unique side design. It is easy to follow instructions and no drilling, simply screw the screws to the correct position to complete the installation process, come with instruction manual for installation.

Why We Like This:

Amazing product and very simple to install
One of the new comers and featured product

Best For Sturdiness: KEMIMOTO Grom Fender Eliminator

Buy on Amazon

This fender eliminator fits with msx125 bike perfectly, the aftermarket turn signals can be installed on this grom fender eliminator directly. It is made of aluminum alloy, it is not only very light but also very hard. The KEMIMOTO parts are developed and tested with the assistance of motorcycles from all over the world. It comes with unique side design. The fender eliminator fits with the msx125 bike perfectly, and the aftermarket turn signals can be installed on this grom fender eliminator directly. It is very pretty straightforward with the install.

Why We Like This:

New and hot release
One of the new comers and featured product