The 9 Best Kitchen tap Hole Covers (2023 reviews)

Here, we review cover that manages to win our hearts. It's the onwon kitchen tap hole cover and it's widely considered as one of all-around great cover you can buy. It is great to fill unwanted holes in the sink. Because of the way they're designed, they'll fit faucet holes ranging from 1.2" to 1.6", which is very helpful. The caps come quickly, are exactly as shown with the brushed stainless steel top veneer, fit perfectly over the holes and look great. They come with a foam gasket to keep water from splashing through your sink holes and dripping into the cabinet below.

It is plastic as it feels a little flimsy. It is suitable for hole sizes between 1.2 and 1.6 inches, the thickness of the sink should be less than 0.4 inches (this is not long enough for granite counter tops), please check the size before purchase.

Why We Like This:

Nice stainless, slightly brushed, sleek and good size
Fills the hole, easy to install
Great for covering holes in sink

Best For Hole sizes: Lovewee Kitchen tap Hole Cover

Buy on Amazon

Not everyone likes to purchase cover for their daily usage, but the lovewee kitchen tap hole cover would be an anomoly. It is suitable for hole sizes between 1.2 to 1.6 inches, the thickness of the sink should be less than 0.4 inches (not long enough for granite counter tops), please check the size before purchase. It is used to seal sink drains and other openings to prevent water leakage. The gasket can not overlap the space of the hole to make a good seal. The good part of the putty is that it will allow for the cover to be flush with the sink. It helps to have someone hold from the top when installing nut from below.

The cover is sturdy, easy to install, and is a cost effective solution.

Why We Like This:

Perfect part to get rid of the ugly spare hole in your kitchen sink
Easy to install if you don't mind crawling under the sink
Delivers what they promise

Best For price: Tatuo Kitchen tap Hole Cover

Buy on Amazon

Next on the list, we've got yet another cover that manages to win our hearts. It's the tatuo kitchen tap hole cover and it's widely considered as cover that has the most suitable features. This is great for a stainless steel sink. It fits over holes perfectly plus protects the cabinet under the sink. It has to be larger than the hole so it doesn't fall through the hole. The rubber feels good quality and installation is as easy as turning the ring by hand.

These plugs are likely meant most for stainless or other thinner sinks. They should have made these caps an inch longer to make it into a one-cap-fits-all.

Why We Like This:

Easy to install and the seal is great
Easy and serves it’s purpose, covers whole from old faucet
Lot of satisfied buyers

Best With Our Sink tap Hole Cover: Yunking Kitchen tap Hole Cover

Buy on Amazon

It is great to cover the hole from the water filter system. The faucet hole cover is made of durable stainless steel and plastic, so please don't worry about rusting and tarnishing, you can use the faucet hole cover brushed nickel for a long time. It covers the spray hole, no need tools, comes with a rubber gasket for good sealing, and doesn't leak.

This hole cover fits perfectly, isn’t terribly noticeable, and has a little gasket to prevent leaking underneath if water gets up on the sink surround. It is suitable for hole sizes between 1.2 to 1.6 inches, the thickness of the sink should be less than 0.4 inches (not long enough for granite counter tops), please check the size before purchase.

Why We Like This:

Easy to install and looks good
Easier than crawling under the sink
Simple easy way to cover an unused hole

Best For granite: Dttra Kitchen tap Hole Cover

Buy on Amazon

We would, of course, be remiss if we didn't mention dttra kitchen tap hole cover for daily purpose. Filling the holes in the granite, the rust proof quality can provide lasting performance in the kitchen sink through kitchen utensils. It is designed to screw into place for quick and easy installation without any tools. It is made of 304 stainless steel, and the bottom of the cover is made of abs plastic, which is not easy to break.

The silicone holds it firmly in place without fear of loosening. It can prevent decoration and leakage, keep the kitchen clean and tidy, prevent water leakage to the floor, and is a useful kitchen accessories.

Why We Like This:

Good investment for long term
Lot of satisfied buyers

Best For Sink sprayer Hole: Lixiongbao Kitchen tap Hole Cover

Buy on Amazon

The lixiongbao kitchen tap hole cover is capable of outshining several other cover featured in this list in overall features for the price point. The sink hole cover of stainless steel sink faucet soap liquid device is decoration and leakage prevention, keeping the kitchen clean and tidy, preventing water from leaking onto the floor, a useful kitchen accessory. It is easy to corrode, not easy to rust, beautiful and generous, as long as new. It does not have a way to somewhat center the cover over the hole. It provides a long lasting performance in your kitchen sink with other kitchen fixtures.

The sink hole cover of stainless steel sink faucet soap liquid device is designed to screw into place for a quick and easy installation, easy to install with no tools required. It is great to fill the holes. It is designed to screw into place for a quick and easy installation, easy to install with no tools required.

Why We Like This:

Preventing water from leaking onto the floor, which is a useful accessory
Delivers what they promise

Best For Kitchen Faucet: Peixiong Kitchen tap Hole Cover

Buy on Amazon

Peixiong offers a variety of cover for personal choice and yet maintaining quality in all the variants. The sink hole cover of stainless steel sink faucet soap liquid device is decoration and leakage prevention, keeping the kitchen clean and tidy, preventing water from leaking onto the floor, a useful kitchen accessory. It provides a long lasting performance in your kitchen sink with other kitchen fixtures.

The Hole Cover is a perfect fit and looks great and very easy to install. These are cured, and they make a more secure mounting of the base plate. The silicone holds it firmly in place, no need to worry about it getting loose. The sink hole cover is made of stainless steel and ABS, which is durable and durable. It is designed to screw into place for a quick and easy installation, easy to install with no tools required.

Why We Like This:

Preventing water from leaking onto the floor, which is a useful accessory
Nice finish, solid enough to match functional faucet and garbage disposal button beside it
One of the new comers and featured product

Best traditional clamping type: Shieraily Kitchen tap Hole Cover

Buy on Amazon

Sink faucet hole covers are made of durable stainless steel and plastic, you don't have to worry about rusting and tarnishing, they are well made and sturdy for long-term use. This faucet hole cover is easy to install, without any other tools, just put the cover through the faucet hole, then tighten the bottom screw from under the sink, and comes with a foam gasket to prevent leaks.

This faucet hole cover is perfect for wash basin, bathrooms, to keep the bathroom clean and tidy, smooth surface, simple and elegant design, to make your bathroom look beautiful and neat. It is suitable for hole sizes between 1.2 and 1.6 inches, the thickness of the sink should be less than 0.4 inches (this is not long enough for granite counter tops), please check the size before purchase. It is well sealed and will not leak.

Why We Like This:

Equipped with rubber gaskets, it is well sealed and will not leak
Smooth surface, simple and generous design, useful functions, make your kitchen look more consistent
Lot of satisfied buyers

Best For cast iron Sink: Ullnosoo Kitchen tap Hole Cover

Buy on Amazon

Compared with other cover in this category, the ullnosoo kitchen tap hole cover has a convenient design. Styling finishes make your kitchen more beautiful and tidy. The matte black finish perfectly matches your black faucet sink. It is made of zinc alloy, and the wing nut and backing plate are made of stainless steel. The color matches fairly well. The finish is a matte black that doesn’t always seem to have a fingerprint or something that needs to be wiped off, very clean looking. It is easy to screw into place. The 2" long threaded shank makes it easy to screw into place.

Why We Like This: