The 9 Best leak Irrigation Control Valves (2023 reviews)

Rain bird leak irrigation control valve is the epitome of what a great valve should be. These irrigation connectors are outstanding. It is constructed of highly durable uv and chemical-resistant materials to assure long life. They slide on to the rain bird XFD drip line easily. It fits and functions perfectly. The tension on the knob is not too firm. They work well and stand up to regular use. It is perfect fit for rb drip tubing. These are sturdy and well-made.

Why We Like This:

Useful for water flow changing to 90 degrees
Works great with rain bird tubing and other adaptors
Easy to install and holds well and shuts off and on easily
Perfect product for extending your drip irrigation systems

Best For Drip: Orbit Water Pressure

Buy on Amazon

Not everyone likes to purchase valve for their daily usage, but the orbit water pressure would be an anomoly. The easiest way to get the tubing on these green ports is to heat the tubing with a lighter. It reduces debris from clogging ports. The top center dial is where the filter is located beneath. It can be added onto most 1/2" risers. It can use a screw driver turning counter clockwise to get access to the filter.

The water pressure is basically equal everywhere at the same level, and this unit's rated for 100psi max. It is easy to crack the 1/2” threaded portion especially after a year. Each port is adjustable with a screw Clockwise to close and CCW to open and adjust flow rate. They come with screw on caps to cap off any unused ports you don't need.

Why We Like This:

Works very low to the ground
Easy to install, just screw on
Works great after a little tinkering

Best For Sprinkler: Orbit leak Irrigation Control Valve

Buy on Amazon

We would, of course, be remiss if we didn't mention orbit leak irrigation control valve for daily purpose. These are not a on/off valve but more of an adjustable flow rate valve. These allow you to customize how much water goes to each plant on a micro drip/spray line. They make the water flow "just right. These can be adjusted to wide open all the way down to just a drip if that's what you need.

These are actually screw valves, which makes them even more useful. It also has adjustable flow rates you can click through to open more and more until it is completely open. The part in question just allows you to open and close and fine tune the flow from your water source.

Why We Like This:

Reliably turns off the water flow on 1/4 inch tubing
A must for anybody who wants to control flow
Good, small valves to put in tight places
Designed specifically for 25 psi irrigation system

Best With Flow Control: Irritrol whole Valve

Buy on Amazon

Irritrol offers a variety of valve for personal choice and yet maintaining quality in all the variants. It offers the dependable, reliable irrigation products they need. It takes longer to dig up the valve then to change the head and connect 2 wires to the solenoid. It works with no problem and additionally comes with a 24 vac solenoid. It allows easy servicing without removal from the system. The bonnet design makes it super easy to replace. It will not shut off completely. Easy to install, the bonnet design makes it flawless to replace with the same type else. It is used for best consistency across system or projects.

Why We Like This:

Very robust & reliable valve for new or service
Easy install to put irrigation system back in operation
Minimum recommended operating pressure is 10 psi

RELATED: Best finding Irrigation lines

Best With Check Valve: Rain Bird latching solenoid

Buy on Amazon

Next on the list, we've got yet another valve that manages to win our hearts. It's the rain bird latching solenoid and it's widely considered as valve that has the most suitable features. The solenoid is 24V and requires a standard irrigation controller to operate. It's designed for homeowners, so it's at least 80 PSI, which is the maximum for homes. The output on controllers are 24V to match the input requirements of the solenoid. It has a design for maximum reliability#. The valve body is the rest piece with the inlet and outlet connectors. The molded part is attached to the pipes and it's a lot easier.

The solenoid is controlled by the 24vdc from the controller / timer. It's just a handle on top for easy turning.

Why We Like This:

Standard and most common irrigation valve
Operates in lowflow and xerigation applications when the rby filter is installed upstream#
Doublefiltered pilotflow design for maximum reliability#
Accepts latching solenoid for use with rain bird battery-operated controllers

Best For Drip Irrigation: Talegen leak Irrigation Control Valve

Buy on Amazon

The talegen leak irrigation control valve is satisfactory and appropriate and fits well with your daily purpose. 1 /4-Inch Barb Shut-Off Valves are ideal for garden irrigation systems, gardens, farmlands, greenhouses, flower beds, lawns, aquarium pumps, etc. It includes 30 pcs and 1/4 inch drip irrigation valves. It works with most new or existing drip irrigation systems. The red handle can be adjusted or completely turned off for easy operation.

Why We Like This:

Easily connect 1/4" drip irrigation tubing, control the water flow to plants or shrubs
Drip watering saves water in drought conditions
Fully functional, smooth action, shuts off completely, opens smoothly
Helping your adjust water to flow or turn off, save your money

Best With nut driver: Hunter encapsulated solenoid

Buy on Amazon

We know from years of feedback from readers, customers and amazon sellers, what most people want in a convenient and appropriate valve. The hunter encapsulated solenoid is exactly that - it's a simple valve that hits all the right notes. Jar-top models provide easy access without tools. It is constructed of high grade pvc that is corrosive and uv resistant. It comes with a captive plunger used on every hunter valve and provides hassle-free service. It is compatible with standard or phillips screwdrivers as well as a nut driver. The flow control maximizes efficiency and prolongs the life of the system. Captive bonnet screws eliminate the possibility of lost parts during disassembly.

It offers a wide range of configurations to fit almost any installation specifications, in any region. It is easy to install and easy to take apart.

Why We Like This:

One of the new comers and featured product
Good investment for long term

Best With spring: Hunter leak Irrigation Control Valve

Buy on Amazon

The hunter leak irrigation control valve's material feels more premium than its price would suggest. The Hunter ICV commercial grade valve is built to work flawlessly in the extremely demanding applications. It is made simple using an variety of common tools. The high-end fabric reinforced EPDM diaphragm and seat can withstand consistent operating pressures up to 220 PSI. It is exceptionally easy to maintain.

This clearly makes the ICV valve a contractor's best choice in any commercial or municipal application. It is a filter sentry option for use in dirty water situations.

Why We Like This:

Good brand reputation
New and hot release

Best value For money: Irritrol leak Irrigation Control Valve

Buy on Amazon

The Irritrol anti-siphon 2700 Series valves offer optimum performance, reliability and ease-of-use for a wide variety of residential applications. Featuring anti-siphon capability, this family of plastic valves also features flow control for precise flow adjustment, manual shutoff and a built-in atmospheric vacuum breaker to eliminate back siphonage. Available in electric and manual models, these valves also feature a flow range from.25 to 30 GPM and a pressure range from 10 to150 psi. The solenoid is required for this unit to work.

Why We Like This: