The 8 Best lift plates for outboard (2023 reviews)

Best part: t-h marine jack plate costs comparatively low and it is available to ship in 24 hours. The Micro-Jacker will only go straight up and then back down. It has a max hp rating of 115 with a 425 pound weight limit. The hole pattern is standard. It comes with a switch that mounts on the dash. The foot of the jet will be slightly lower than your measurements without the setback and angle. The jack plate moves the engine up and down without a struggle even at full power.

There is a relief valve on the bottom side of the hydraulic actuator that you can take out to relieve the pressure and manually move the jack plate up or down. It will take longer bolts to install a power pole in front of the atlas micro jacker then mount the motor to atlas micro jacker.

Why We Like This:

Very fast travel up and down
Fits the standard bolt pattern, 4” setback with 5” of hydraulic vertical lift
Works fine in saltwater, no rust

Fiberfly lift Plate for outboard

Buy on Amazon

The fiberfly lift plate for outboard is capable of outshining several other plate featured in this list in overall features in its price range. The Jack Plates are the perfect solution for long shaft engines with a short shaft transom boathere. It is combined with the 6 inches of adjustable vertical lift you can obtain 5500 inches at a maximum height to raise your long shaft engine and make it workable on a short shaft transom boathere are the pre-drilled hole dimensions listed below in inches. The bolt pattern is standard.

The jack plate is designed so you can raise or lower your outboard motor for the best performance. It’s to raise a motor so basically the opposite of what you need, when mounting at the lowest setting the motor will sit exactly where it is mounted originally. The engine side holes of the jack plate are drilled 1.500 inches higher than the transom side.

The Manual Jack plate weighs 27 lbs, light and easily for installation.

Why We Like This:

You will have 4 inches of adjustable movement
Works excellent for the boat to run in way shallower water
Good investment for long term

T. H. Marine lift Plate for outboard

Buy on Amazon

The t. h. marine lift plate for outboard's superior materials makes sure that it ages well with use. This is an atlas jack plate that supports the motor and mounts to the transom on one side and the outboard on the other. It has one inch of lift built in to the frame and 5 inches of hydraulic lift. It does come pre drilled. It offers a special part number for basscat boats.

The bolt pattern is an industry standard. It works on motors up to 300 hp. It comes with enough wiring and hose length for the jack plate. This will not lower your motor, it is designed to raise the motor from its current location. It does come with a rocker style switch.

Why We Like This:

Silicone caulk tube, cleaning supplies for surface prep
Self-contained hydraulic pump system, no reservoir or lines to install
Speed and self contained lifting action
High-tech engineered polymer rods, six times more abrasion resistant then steel

Bob'S Machine Shop Jack Plate

Buy on Amazon

The first bob jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat. The material and the new internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards. It comes with holes for the talons. This will provide plenty of space. It is a great oem feature to help save time in rigging.

Why We Like This:

Large powerful motor that can lift heavy outboards under full power
Pre drilled for dual side mount power pole brackets
New and hot release

Bob'S Machine Shop lift Plate for outboard

Buy on Amazon

The bob's machine shop lift plate for outboard is capable of outshining several other plate featured in this list in overall features for the price point.

Why We Like This:

Large powerful motor that can lift heavy outboards under full power
Lot of satisfied buyers

Vepurlt lift Plate for outboard

Buy on Amazon

The features department is where vepurlt lift plate for outboard truly manages to shine. This jack plate is designed for smaller motors to improve the performance of your boat. It fits all v-4 and v-6 standard bolt pattern engines. It is made of aluminum. It is combined with the 4 inches of adjustable vertical lift so you can obtain 5.500 inches at a maximum height to raise your long shaft engine and make it workable on a short shaft transom boat.

The manual jack plate weighs 20 lbs, light and easily installation. The engine side holes of the jack plate are drilled 1.500 inches higher than the transom side. It is rated for motors up to 150 hp and comes in an attractive polished aluminum finish.

Why We Like This:

Stainless steel bolts hold the angles in place
Pre-drilled holes for 1/2'' stainless hardware
Fit for 150 maximum horsepower boat equipment
Offers 4 inches of adjustable vertical movement

T-H Marine lift Plate for outboard

Buy on Amazon

We know from years of feedback from readers, customers and amazon sellers, what most people want in a convenient and appropriate plate. The t-h marine lift plate for outboard is exactly that - it's a simple plate that hits all the right notes. It is easy to hook up with zero hydraulics and it travels up and down faster than the standard hydraulic jack plate. It has 1 inch of lift built in to the frame and 5 inches of hydraulic travel so you will get 6 inches installed at normal position. It comes with 4 bolts, washers and nuts to attach to the boat. A gauge makes it easy to know where the motor is without looking back.

This plate also features the newest concept in one. It is made from self-lubricating material. It is predrilled for any motor with a 4 or 6 bolt pattern up to 400 hp.

Why We Like This:

High-tech engineered polymer rods, six times more abrasion resistant then steel
Self-contained hydraulic pump system, no reservoir or lines to install
Speed and self contained lifting action

BESTOOL Professional garage tools equipment lift Plate for outboard

Buy on Amazon

The bestool jack plate for outboard is designed for quick and easy installation, with a slip-on design that allows you to replace your original damaged or rusted one without the need for specialized tools or skills. It is made of high-strength polished aircraft quality aluminum, with stainless steel fasteners, which provides maximum corrosion resistance and durability, ensuring that it will last for years.

The outboard jack plate offers 4 inches of adjustable vertical movement, which allows you to fine-tune the height of your motor to optimize performance and fuel efficiency. It’s perfect for salt water applications with the Aluminum plates and stainless steel bolts. The bestool jack plate allows you to lift your long axle engine up to 5.5 inches, making it possible to use it on short axle beam boats that would otherwise be incompatible. This is perfect for flats and shallows.

Why We Like This: