The 11 Best Mic pod Mounts (2023 reviews)

It works fine to mount a microphone gooseneck to a speaker's podium. This mount and the microphone are going to be heavy, you will want to either find a stud in the wall ( preferably ) or drill holes in the wall and use extra secure wall anchors. There are many short length stems you could use. This tool is super convenient and perfect for mounting.

This mount works well with on stage goose necks and other similar items requiring a standard thread mount. The threads haven't shredded off after repeated use, and the rubber pad on the bottom is actually quite effective at dampening shock noise.

Why We Like This:

Has cushioned underside to dampen vibrations
Works well for studio ceiling mount
New and hot release

Best With Standard Microphone stands: Moukey Mic pod Mount

Buy on Amazon

Not everyone likes to purchase mount for their regular usage, but the moukey mic pod mount would be an anomoly. The advanced combination conversion interface is a combination of 3/8 and 5/8, which eliminates a close-to-human design of the conversion nut. It features a new streamlined, lighter weight design, perfect for on-camera streaming. It is durable and prevents rust. The Shock Mount is well made and keeps the microphone securely attached. It is perfectly into the retaining nut and the retaining mechanisms hold the mic steady and firmly. This definitely reduces shock/virbration noise and is perfect for casual use.

The mount holds it well and is easy to adjust and easy to screw the mike into and out quickly. It comes with a 5/8 interface, so it can be used together.

Why We Like This:

Fits the blue yeti mic, reduces vibration, fit a standard mic stand
Fits the yeti screw and does not block either usb or mic jacks
Holds the blue yeti microphone as expected and looks good

Best With Clamp: Rode Mic pod Mount

Buy on Amazon

Rode is known for creating pragmatic and minimalist mount for people on the go, and its line of rode mic pod mount definitely falls in line with that reputation. This is a screw retained mount designed for a side address mic. It's a threaded socket into which you screw the mike stand, no extra bolt required. The other style shock mount that rode uses has a squeeze clip and could probably hold other similar sized studio mics. The shock mount goes on in seconds and the pop screen is great. It's sturdy and holds the mic extremely well.

The design gives perfect placement to the pop filter which solves awkward couplings with standard filters. All the parts are metal so you can crank down hard on the knobs and not break anything.

Why We Like This:

Great combo shock mount + pop filter
Fits perfectly and you can use it in many positions
Locks in place, heavy duty adjustments
More suited for the broadcaster than the podcaster and the procaster

Best With mounting Screw: Btoop Mic pod Mount

Buy on Amazon

We know from years of feedback from readers, customers and amazon sellers, what most people want in a convenient and appropriate mount. The btoop mic pod mount is exactly that - it's a simple mount that hits all the right notes. This mic shock mount is metal, so it can hold the weight of the microphone. The shaped pop filter has three layers design that include foam layer, metal mesh layer and basic etamine layer that can effectively reduce the plosive, wind interference, saliva spraying. It keeps the mic to the stand's center point and it is rock solid stable with no fear of it tipping over. If you have a professional, this is a great additive for extra filtering, to reduce incoming sharp sounds and etc.

The pop filter does a good job of handling the plosives and the shock mount is easy to assemble and use. It comes with extra rings as well to hold the filter to the mic. It would be perfect with a microphone suspension boom scissor arm stand.

Why We Like This:

Sturdy mount and nice pop filter
Perfectly goes with the mic and cater the purpose of it efficiently
Fits well, bungies around shock mount look like hair elastics, but they work
Works really well with the audio-technica at2020usb plus cardioid condenser usb microphone

Best For podcasting: Boseen Mic pod Mount

Buy on Amazon

If you often find yourself scrambling for appropriate and satisfactory mount, boseen mic pod mount is your end point. This ShockMount will fit most big fat condenser mikes. It is suitable for many USB microphones with function knobs, such as fifine, blue yeti/snowball, and razer. It is sturdy and easy to mount and the rings are great because you can spin the mic in the directions you want and just tighten rather than struggling with a jaw grip type rubber mount. It comes with an extra elastic band and looks very professional.

The metal rings are used to hold the bottom of the mic. It is also stable, it stays horizontal or at a downward angle, but if you try to put it at an upward angle it won't stay. This is one accessory where you can save money and be assured you are getting a very decent shockmount.

Why We Like This:

Screws it into place, reducing greater odds of mic noise
A very sturdy, well-balanced metal universal shock mount
Great shock mount for several rode microphones
Works great especially for the sampson boom stick, compatible with many mics

Best For Streaming Or virtual meetings: Innogear Mic pod Mount

Buy on Amazon

We would, of course, be remiss if we didn't mention innogear mic pod mount for regular usage. It is perfect fit for the hyperx quadcast mic and sturdy. The mounting clamp (piece that attaches to your desk/table) is very strong. It is made of high-quality material and can protect the microphone all-around with a high rubber rope design which makes the microphone more convenient to install and prevent it from falling. The new arm not only supports the blue yeti weight without sagging / drooping / slowly lowering. The extra strong spring of the boom arm prevents the microphone from accidental dropping, noise generation and shaking.

The package comes with 5 cable ties for putting your microphone cable in order and avoiding a mess. If you wanna use it 10 times a day, it's actually very cool and very flexible. It is great for non condenser mics.

Why We Like This:

Works very well for gaming/audio recording
Adjusts easily, and easy to set up and assemble
Works well and stand is very adaptable
Great boom, easy to use and convenient to reposition

Best For clamping Mics: Camvate Mic pod Mount

Buy on Amazon

The camvate mic pod mount is suitable and reliable and fits well with your daily purpose. This crab clamp works great for lockpicking. The clamp is great and has multiple threads to position the extension where ever you’d like. The clamp holds on to the monitor arm and the mic floats with the mount hidden. It can clamp so tight that a flimsy tube would be crushed.

These smaller clamps in particular are great for the side of snare rims and toms that have the mounting hardware. They're built sturdy. It is used for live sound under hi hats. Each of these steering wheels is stock, no additional covering or padding.

Why We Like This:

Looks great and is much sturdier that the original
Use for clamping microphones, cameras, to just about anything
Perfect boom to microphone base clamp
Easily attaches 2 pound lights to mic stands, ladders, etc

Best With Pop Filter: Audiotechnica Mic pod Mount

Buy on Amazon

If you are currently in the market looking for a suitable mount for your daily usage, audiotechnica mic pod mount is the natural choice. It fits all of the AT2020 series microphones. It does isolate the mic from shocks as designed. As other reviewers have said, this mount eliminates a LOT (not all) of noise transmitted from bumping the mic stand, tapping (or cat jumping onto) the desk, etc. It hugs the mic and can be used in multiple positions.

The shock mount does hide a portion of the painted logos identifying those two dials, but the dials themselves are still easy to access, and so is the headphone input. There should be a threaded plug on the scissor boom which can be removed and it should fit. The plastic knob doesn't give you the needed torque to tighten the mic down solid. This one works really well and is affordable.

Why We Like This:

Great value, durable and high quality production
Great mount for the at2020 usb plus
New and hot release

Best For camera: YOUSHARES Mic pod Mount

Buy on Amazon

If you often find yourself confused about appropriate and satisfactory mount, youshares mic pod mount is your end point. The base of the Yeti X is tapered in more so than the Yeti, affording less room for the ports on the bottom. It looks great (just like the SM7B), and sounds way better than the included MV7 foam. It also comes with the screw mount to mount it to a table or desk. It doesn't block all the plosives and is better suited to off-axis speaking a short distance from the mic.

This windscreen is identical to the one you originally receive with the microphone. It works well with rode podmic. The rubber mat between the metal bolt and microphone attaches that prevent scratches from your microphone or mount and will bitterly cinch down the bolt.

Why We Like This:

Perfect starting boom arm, you will need to buy separate clamps
New and hot release

Best With Any video lamp: Acetaken Mic pod Mount

Buy on Amazon

The acetaken mic pod mount's high-end materials makes sure that it ages well with use. It is compatible with almost traditional microphones by microphone clip. It is compatible with any video lamp, led light panel, ring light, photography light with 1/4''-20 interface. It has one set screw and 2 pivot points. It is compatible with shure microphone sm58 sm57 sm81 etc, sennheiser e604, akg d112, etc. The more weight and size will make it harder to tighten in 2 places. It comes with a 3/8''-16 and 5/8''-27 microphone adapter hole.

Why We Like This:

Sturdy, easy to adjust and tighten
Works great, easy to use and very handy
Good brand reputation

Best With Shockmount: Mictop Mic pod Mount

Buy on Amazon

Not everyone likes to purchase mount for their daily usage, but the mictop mic pod mount would be an anomoly. It works on a huge number of microphones. The package includes a pop filter, preventing the dreaded hissing and lisping sounds to make your sound perfect, effectively reduce the plosive, wind interference, saliva spraying. The unique shape gives the shockmount specific compliance to the microphone, isolates the mic from physical vibration, floor, and stand noise, and prevent unwanted movement of the microphone when you are recording.

The adjustment screws have a lot of flexibility. There are four screws which need to be tightened against the microphone body. Actually, it has such a good amount of different mic sizes it can hold that this is a no brainer.

Why We Like This: