We consider a mightymule dual solar gate opener to be a worthy investment in the long run.
We are here to help you choose the right one for your needs from all the best available products in market today.
Our review process:
We have listed out the most suitable openers for your regular usage after careful inspection and comparative studies.
Our final set has reliable products and we also managed to maintain variety within our picks for personal choice.
Buy on Amazon
The mighty mule circuit board's material feels more premium than its price would suggest. This opener power supply uses a 12 volt battery supply. It is designed for heavy duty single swing gates up to a maximum of 18 ft. long or maximum weight of 850 lbs. It’s wired into the circuit board, and the board controls the rest. It has a new nice feature where it slows down before it connects with other gate or gets to wide open.
It is a setting (switch) on the controller board. It comes with its own larger battery. It is designed for colder climates. The old system requires 7 wires and runs under the driveway.
Why We Like This:
Easy to install durable and reliable
Include your solar panel wattage, geographic location, sun exposure, and even battery capacity
Good opener kit, easy to install if you follow directions
Buy on Amazon
The mighty mule control box has killer features for the price point. The system works as well as the 600 if not better and Mighty Mule's tech support is easy to speak with and very helpful. This opener can be used for a push or pull to open the gate. The lock is a key and the pin has a cap so it does not come off. The system is compatible with Mighty Mule DIP switch transmitters and keypads. It is perfect because it isn't bundled with a solar panel, and has a small 12 volt battery supplied.
The system is capped by the 25 amp fuse. The plug in inverter is a supplied option for a trickle charger inverter to charge the battery.
Why We Like This:
Comes with everything you need as long as you have power
Buy on Amazon
The mighty mule chain link should be able to handle its purpose and duties with ease. The gate opener requires only one battery. The system is powered by a 12vdc automotive or marine battery. This is generally buried underneath the driveway but you can use a drive-over cable protector if your driveway concrete is already poured. The mounting brackets are improved so there's less "slop" in the mechanism, but lack of a soft start and stop capability will quickly wear the holes egg shaped.
The system is very good openers. The box has the on off switch on it so you wouldn't want it too far away. The process is fairly easy and is spelled out in the manual. It comes with a Remote Antenna kit.
Buy on Amazon
The mightymule dual solar gate opener should be able to handle its purpose and duties with ease. The plastic circuit board case is thinner and comes equipped with two out of four stripped holes, which is OK since it only comes with 2 screws instead of four, with one wrapped with Teflon tape on the threads. This is built with 2X2 square tubing for the frame with 1" square tube for the inside runners 4" apart. The board has a setting to let you adjust closing and opening pressure.
This does have a chain drive system and will work on slide gates up to 30' long. The chain is low quality and sprockets are mounted on bushings rather than bearings. The gate opener is complete with control box and battery, transformer, transmitter and hardware for mounting. The kit will include (1) entry transmitter, mounting hardware, (1) installation manual, (1) 12V battery and warning signs. This opener starts at full force so it's almost like a jerk start. It is compatible with homelink security systems.
Why We Like This:
Well designed, well put together and good customer support
Buy on Amazon
We know from years of feedback from readers, customers and amazon sellers, what most people want in a convenient and appropriate opener. The product is exactly that - it's a simple product that hits all the right notes. It is ideal for light commericial and residential slide gate applications, and is a compact design for tight spaces. It provides connections for safety loops, wands, intercoms, card readers and phone systems. It features a built in internal friction brake locking device that locks the gate in the closed position for added security. The plastic circuit board case is thinner and comes equipped with two out of four stripped holes, which is OK since it only comes with 2 screws instead of four, with one wrapped with Teflon tape on the threads.
This opener doesn’t use loop detectors. Its modular design makes it easy to install and the mounting post can be set to almost any height, depending on the slope of your driveway and the type of vehicle that will be passing through your gate. The system comes with an power adaptor to keep the battery charged, which plugs into a standard 110V/120V socket. This does come with one wireless single button remote control.
Why We Like This:
Opening time is 1-foot per second, and has a high cycle capability
Buy on Amazon
The mighty mule old board's superior materials makes sure that it ages well with use. The mighty mule replacement control board for the mighty mule gate opener ( r4211 ) is a replacement control board for the fm500/fm502 & mm560/mm562 series swing gate openers. It features mighty mule's exclusive dual sense technology for additional protection & safety. It can handle push and pull-to-open settings and dual gate operation and can direct power from a solar panel or from an ac transformer.
There is no need for a charge controller when attaching the solar panel to the circuit board. The battery charger for the 502 is built into the board and when lightning sticks the board would not keep the batteries charged. This is an exact replacement for the original control board. It is good for single or double opening gates.
Buy on Amazon
The mighty mule correct board should be able to handle its purpose and duties with ease. The mighty mule replacement control board for the mighty mule gate opener ( r4211) is a replacement control board for the fm500 / fm502 & mm560 / mm562 comes with a 6 ” dual battery harness w/ bullet connector. The circuit board has a built. This board is actually an upgraded model that can control two motor arms if required. The delay time is not adjustable.
This board is the mosr current version and works with GTO, Mighty Mule and Linear legacy control panels. The soft-stop feature with this board is nicer than the original board had, as is the auto-programming feature. The r4211 replacement Control Board is compatible with the FM502 Dual Gate Opener.
Buy on Amazon
Compared with other products by Mighty Mule, the mighty mule replacement control board has a convenient design. The Mighty mule control board works great. It is designed to work with all mighty mule automatic gate openers. They plug into the "master operation" bus on the left side of the board. The gate is opening and closing correctly. The board itself runs off the battery power. It is an ideal accessory for convenience and security. This Board will also work with SW3000XLS & SW4000XLS Models.
Buy on Amazon
Best part: mighty mule new board costs comparatively low and it is available to ship in 24 hours. The mighty mule replacement control board for mighty mule gate opener ( r4211 ) is a replacement control board for the fm500 / fm502 & mm560 / mm562 and comes with a 6 ” dual battery harness w/ bullet connector. The new board has nicer features when it comes to setting delays and stop limits on the gate. It is an ideal replacement control board if a previous board is burned out by a lightning strike, a power surge or if the previous board was burned out by reversed battery wiring.
The circuit board has a built-in Diode to prevent the solar panel from overcharging. The battery charger for the 502 is built into the board and when lightning stuck the board would not keep the batteries charged. The single-button gate opener remote is a great accessory for a replacement or for an additional user to compliment your mighty mule automatic gate opener.
Buy on Amazon
The mighty mule control board should be able to handle its purpose and duties with ease. The Mighty Mule Replacement Control Board for Mighty Mule Gate Opener (R4211) is a replacement control board for the FM500/FM502 & MM560/MM562 and comes with a 6” Dual Battery Harness w/Bullet Connector. It is an ideal replacement control board if a previous board is burned out by a lightning strike, a power surge or if the previous board is burned out by reversed battery wiring. It is used to maintain a battery charge by providing a trickle charge of power to the gate opener battery.
This is the replacement control board for that model as well as a few other Mighty Mule and GTO/PRO gate opener models. They are powerful antennae and even the wind can generate static charge. The power only helps charge the battery. These guys have gate openers nailed.