The 9 Best Olympic Barbell hangers (2023 reviews)

The yes4all olympic barbell hanger is long-lasting, rigid and fits well with your regular usage like a dream. Space-saving solution for your fitness home gym available as a quadruple bar storage accessory, the compact yes4all wall mounted barbell holder top is constructed of a 4.5mm thick steel base with a black paint coating finish to stand for years without corrosion or breaking apart. It is easy to install and very sturdy, without being an eyesore. It also helps with saving space by holding them up vertically. It has some nice thick plastic where the bars hang, in order to perfect your bars.

The wall mounted barbell holder top is fully equipped with a thick padded plastic layer to reduce noise and protect your precious barbells from damage. It has plastic plates on the bottom and back of the mount so it does not scratch your bars. It is great to use with weightlifting bars, power bars, curl bars, cambered lifting bars, and other specialty olympic bars. It is built like a tank and if you bolt it to the wall correctly it may even hold a tank.

Why We Like This:

Perfect for mounting on stud walls
Has plastic to protect the bar where it hangs in the bracket
Pre-drilled screw holes to fit both disrance of wall studs
Looks very sleek and nice on the wall

Best For Gym equipment: BRTGYM Olympic Barbell hanger

Buy on Amazon

Compared with other hanger in this category, the brtgym olympic barbell hanger has a convenient design. This rack is great for all that gym equipment that you don’t want lying on the floor. It's made from very thick and very heavy metal which makes it perfect to hold your heavy equipment. It can also hang your garage tools.

The solid steel construction will last a long time, and the nice black finish fits perfectly into your gym decoration. It's heavy, sturdy and really good quality. The metal is very thick and sturdy. It is sturdy and easy to install.

Why We Like This:

Very well made and tough built to handle your heavy rugged gym equipment
Holds two barbells and clips easily
Easy to install if you have some handy man experience
Comes included with lag bolts, holes are 16 inches allowing mounting to studs

Best For two Bar SETUP: PRX Performance Olympic Barbell hanger

Buy on Amazon

The prx performance olympic barbell hanger's high-end materials makes sure that it ages well with use. This barbell storage hanger is built strong and will never need to be replaced. It can be attached to a full concrete wall. It has all the accessories you will need to hang this. The holder is solid metal and feels sturdy. It is easy to install as a single stud mount. It is good for regular bars and curl bars.

Why We Like This:

Easy install with some lag screws and it's good to go
Gets barbells off the floor when not in use
One of the new comers and featured product

Best Wall hanger: Vehcarc Olympic Barbell hanger

Buy on Amazon

The vehcarc olympic barbell hanger is suitable and reliable and fits well with your daily usage. This is a great wall hanger. The workout gear organizer holds up to 3 sets of olympic barbells and most of the fitness equipment suitable for this wall mounted rack. It’s sturdy and does what it is made to do. The extra wider hook makes the whole max holding weight 45kg/100 lb for drywall and 68kg/150 lb for the concrete wall. The black powder coat looks good, no scratches or dents present.

The rack organizer is made strong. The rust steel makes it sturdy enough for rugged use in home gyms and fitness rooms. There are 8 total prongs for hanging things. It is easy to install and utilitarian enough to accommodate all your needs with hanging exercise equipment suitable for this wall mounted rack.

Why We Like This:

Versatile and gets the job done
Lot of satisfied buyers

Best For small home Gym: Uboway Olympic Barbell hanger

Buy on Amazon

Best part: uboway olympic barbell hanger costs comparatively low and it is available to ship in 24 hours. This is a well designed and manufactured rack for hanging up to 3 barbells. It has two or three barbells in your home, which is easy rolling and hard to stand. The vertical hanging uses less space and is perfect for a small home gym. The Purposely made raised plastic pad can reduce noise, protect your barbells and prevents the barbell bar from slipping. It frees up floor space.

A wall mounted barbell holder will help you to manage these barbells easierly. It provides rust protection plus it is compatible with all standard and olympic bars with diameter.

Why We Like This:

Excellent accessory piece for storing barbells
Plenty room for the barbell diameter to hold them
Lot of satisfied buyers

Best Bar Holder: Rigers Fitness Olympic Barbell hanger

Buy on Amazon

The rigers fitness olympic barbell hanger's high-end materials makes sure that it ages well with use. The new space-saving vertical bar hanger is the best alternative for bulky bar holder, which helps you save floor space and effectively prevent trips and falls on the floor as well. It is compatible with 12, 14 & 16 inch wood studs. It includes mounting hardware for easy & quick installation.

It is a well built vertical barbell holder. It can be installed to wood studs, wood backer board, or masonry. It is very solid and holds 4 bars with no problems. The screws it comes with are cheaply made, hence they will snap off if you try to tighten them up really good. It's nice that it holds 4 bars vs most vertical hangers that hold.

Why We Like This:

Plastic inserts prevent any metal to metal contact
Really helps to organize a home gym
Good investment for long term

Best For home Gym: Alvade Olympic Barbell hanger

Buy on Amazon

Next on the list, we've got yet another hanger that manages to win our hearts. It's the alvade olympic barbell hanger and it's widely considered as hanger that has the most suitable features. This wall mount barbell holder is great for your home gym, it has your barbell completely out of the way but easily accessible. This rack is perfect to save your gym space and keep your gym look neat. It is made of elastic steel and won't easily break for bearing heavy weight and black powder coated to add durability in long term use. It comes with hardware needed additionally it is counterbore so that the black screw head is parallel to the plate, giving a nice look for the rack.

Alvade produce diverse household storage products at a cost-friendly price for families around the world. It securely holds the barbell up out of the way, and fits the Olympic bars perfectly. This 5mm thick cut CNC machine precisely gives this barbell storage holder a smooth edge.

Why We Like This:

Keep your bands and yoga easily to reach while save your ground space
Good investment for long term

Best For giving A home: Jniheep Olympic Barbell hanger

Buy on Amazon

We know from years of feedback from readers, customers and amazon sellers, what most people want in a convenient and appropriate hanger. The jniheep olympic barbell hanger is exactly that - it's a simple hanger that hits all the right notes. This wall mount barbell holder can effectively save more space and store your fitness equipment neatly. It is designed to hold an olympic sized bar. It provides good care for your steel bars, and you can use them for a long time. The hanger is constructed of a heavy gage steel, with a design that secures the bar once in place. It comes with both drywall and concrete anchors. All the fingers/combs are spaced apart to avoid overlapping, thus protecting your equipment and shelves from scratches.

This bracket is quite heavy duty and comes with three methods of attaching it to the wall. It's very easy to put bars in and out, and they are very securely held without scratching the bars at all. This is such a good tool to keep the extra bars off the ground and organized.

Why We Like This:

Easy, good wall anchors come with it
Bends or cracks or dry rotting
Great construction in this unit, very solid

Best For lighter ones: X3M Olympic Barbell hanger

Buy on Amazon

The x3m olympic barbell hanger's high-end materials makes sure that it ages well with use. The Olympic bars fit perfectly and are well protected by the plastic layer. Rather than having the extra barbells laying on the ground, this helps keep them cleaner and organized. The holder fits standard bar bells well, is well made and easy to install.

It's made of heavy gauge steel plate and attaches to the wall with supplied heavy screws. There's heavy-duty plastic bolted to the steel to protect your barbell. The material is top notch, it looks clean and it's heavy duty. The horizontal barbell storage will keep your weights off the ground and protect them from damage.

Why We Like This: