The 9 Best part stands (2023 reviews)

Are you looking for collection of best part stands ? You have come to the right page.

Our review process: Show/Hide

Our Top Picks:

Best Overall: Buy: Innogear part Stand READ REVIEW

Best Mic Stand: Buy: Bilione part Stand READ REVIEW

Best For wall mounting: Buy: Gator Frameworks part Stand READ REVIEW

Best little collapsing Stand: Buy: Mictop part Stand READ REVIEW

Best For Easy replacement: Buy: Chauvet DJ part Stand READ REVIEW

Best For Audio recordings: Buy: Km part Stand READ REVIEW

Best For Live band: Buy: unknown part Stand READ REVIEW

Best For mobile Use: Buy: Cedarslink part Stand READ REVIEW

Best Feature: Easy To assemble: Buy: fat Toad part Stand READ REVIEW

Best Overall: Innogear part Stand

Buy on Amazon

The innogear part stand is capable of outshining several other stand featured in this list in overall features. This desktop microphone stand is designed with a heavy weighted powder coated black finish base that features a rubber gasket on the bottom to absorb vibration and provide a precise balance and stability for kick drum and amp mic stand. The boom supports the microphone, and shock mounts at an side angle. The arm can be swung about 30 degrees off center without tipping which makes it easy to push out of the way.

This short weighted base mic stand has a maximum height of 40cm158 inches for flexible usage and is constructed of heavy. The mic position is very adjustable. The telescoping boom arm allows you to adjust the length and angle to the perfect angle independently. It's very heavy so it doesn't tip over. This stand is very well built with quality material. It provides excellent stability for even heavy mics.

• Heavy base, very capable of holding microphone with arm fully extended
• Comes with a microphone holder and screw adapter
• Locking mechanisms are easy to tighten and loosen
• A sturdy threaded adapter is included

Best Mic Stand: Bilione part Stand

Buy on Amazon

This stand is ROCK SOLID. It looks, the sturdiness and the weight. It's nice and solid and the quality is good. It's easy to mount and use. The extension tube is metal but the tightening knob is plastic as is the accessory for the camera mount. It's easily fixed by using a flat head screw driver to carefully pop the plastic bottom off the stand. The weight also makes it more stable.

The cellphone holder and microphone clip are a nice bonus to have in the studio and can be threaded onto any standard microphone stand. It is if you have the correct mic adapter or shock mount, a solid desk stand with heavy base, and has plenty of height if needed.

• Sturdy and functional for lightweight items
• Highly recommend for those who record narrations and/or produce podcasts
• You can switch clips as needed to achieve different functions

Best For wall mounting: Gator Frameworks part Stand

Buy on Amazon

Gator Frameworks line of stand come in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. This is an easy desk upgrade that will suit most people. It looks great, operates almost effortlessly and smoothly. The microphone just screws onto the boom stand and uses an XLR connection. It includes both clamp and fixed mount hardware. Each boom arm includes both a clamping and mounting base attachment mechanism to best accommodate your particular setup needs and swivels a full.

The clamp holds tight and there are plenty of locking positions on it. All stands are engineered specifically to reduce noise brought about from moving parts and can be adjusted to hit desired angles, providing you with quiet and easily customizable mic placement options.

• A well built clamp-style and a bolt-in stand support
• Hides the xlr cable inside the boom arm
• Reducing stand solutions perfectly suited for broadcasters, podcasters, content creators, radio hosts, and on

Best little collapsing Stand: Mictop part Stand

Buy on Amazon

The mictop part stand's high-end materials makes sure that it ages well with use. It's perfect for a desk top shure mv88+ stand. It appears to be made out of a quality lightweight material, making it extremely practical. It can work in a pinch, with three sticky tack mounting putty or alien tape under the feat so it doesn't tip over in specific positions that sometimes can be a problem. The spread of the legs is adjustable, so the wider you make them, the sturdier it becomes.

The lightweight form factor means that the microphone stand can be prone to tipping over in specific positions that sometimes can be a problem. It comes with the screw adapter, this mic stand is also compatible with blue yeti, snowball, shure sm7b, shure mv7, and rode podmic. This is so much lighter to move around and sturdy too.

• Using for conference room/virtual work meetings
• Lot of satisfied buyers

Best For Easy replacement: Chauvet DJ part Stand

Buy on Amazon

We know from years of feedback from readers, customers and amazon sellers, what most people want in a convenient and appropriate stand. The chauvet dj part stand is exactly that - it's a simple stand that hits all the right notes. The lights are very lightweight themselves, and very mobile. It is used to use the hallogen bulb for 1, 000+ watt spot lights. The control panel is clear and easy, buttons feel nice and responsive and having owned alot of lighting fixtures, its so nice to finally flick through the menu and basically find either dmx or manual mode. The light works perfect, with the exception that the fan is loud. A diffuser is used to reduce the hardness of the light.

This light is smaller, has white light not a yellowish cast as in the older lights. It features, colors, tight and wide spot are all exceptional. It is custom made if they are going to be high-detailed images. The size and control of the spot beam is perfect.

• Very light weight and smaller than a normal spotlight
• Led and incandescent are two animals
• Low low heat and low noise
• Perfect follow spot for small venues

Best For Audio recordings: Km part Stand

Buy on Amazon

Not everyone likes to purchase stand for their regular usage, but the km part stand would be an anomoly. This best-selling stand allows for maximum durability and stability so you can keep focused on your music. It can be used on smooth surfaces and round shaped tubes. It also comes with an adapter so that you should be able to connect your microphone to the arm no matter what size connector you require.

This is constructed of aluminum, and the arm is solid. It allows the clamp to be attached to a wide variety of surfaces. The integrated cable works just fine, albeit non-removable and permanent. The boom hasn't sagged a centimeter, and is extremely fluid when repositioning.

• Sleek solution for small studio space
• 3.2 pounds are easily held in any position
• Lot of satisfied buyers

Best For Live band: unknown part Stand

Buy on Amazon

The unknown part stand is suitable and reliable and fits well with your daily purpose. The ProX Truss Heavy Duty Crank Stands are an integral part of the Truss SQ System for temporarily mounting lights for small to medium sized DJ lighting at any event. It is made with heavy duty all-metal components. It folds easily to a portable size for transport.

The stand is positioned on a hard stable surface in a suitable location on firm ground and clear of overhead obstacles. It is perfect for a live band and mobile dj applications that eliminate direct lifting and lowering of heavy loads. It's equipped with a smooth heavy-duty cranking mechanism.

• Delivers what they promise
• Good investment for long term

Best For mobile Use: Cedarslink part Stand

Buy on Amazon

Cedarslink line of stand come in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. It works with any crank or fixed tripod stand with 35mm.-40mm. The safety cotter pin ensures the pin will not slide out of place. It includes 4 couplers with pins to attach both truss sections together.

• Extremely durable and complete heavy duty system
• One of the new comers and featured product

Best Feature: Easy To assemble: fat Toad part Stand

Buy on Amazon

We would, of course, be remiss if we didn't mention fat toad part stand for daily purpose. Whether you're spinning some tunes for a house party or getting the crowd going at a club, this table is sure to be the centerpiece of the event. It measures 47.5 inches wide and 23.75 inches deep, so you'll have plenty of room to get your groove on. It is made in a steel honeycomb design and can easily be used to mount a lightweight tv or logo sign.

The removable solid steel tabletop shelf easily hangs right on the frame and has a hole in 2 corners to run your wires through. The heavy-duty square steel frame tubing is light enough for transport and heavy duty enough to hold your gear. It is removable, and the base folds into one single panel about 6” thick. The sleek and sturdy design will keep your setup in place, no matter how wild things get.

• Metal parts are individually prepped, sanded, hung, coated and re-coated again
• One of the new comers and featured product