The 9 Best Passive DI Boxes For Bass (2023 reviews)

The latest behringer passive di box for bass is an absolute beast in terms of its features, and rightfully takes the top spot with ease. This load can be a speaker or speaker load simulator, basically what you would normally connect to the amp. It is used to bypass an amp and get a simple clean signal from the instrument. When the ground lift is enabled, the hum is pretty low and having a good strong output from the source helps keep the noise floor low. It can be used on stage to convert a low impedance signal (1/4" cable) to three-pin xlr. It does a great job of eliminating line level hum/noise. The plating on the connector looks robust. It is a passive device and requires no 9v battery to power it up. It is good for new devices, watchout for static on old instruments.

Why We Like This:

Handles speaker level input for recording, as well direct input from guitar
Good investment for long term

Best For hooking into A stage snake: Yovus Passive DI Box For Bass

Buy on Amazon

Yovus has been making great box for years, thanks to a combination of clever design and appropriate materials. This DI Box is a good value, well made and has great features. It is a low cost chinese made passive di. It is perfect for hooking into a stage snake. There will be knobs (vol, gain, etc and a battery or power source) involved to control the amount of boost. It is great for keyboardists, acoustic & electric guitarists, bassists, and other instrumentalists needing to plug into the snake on stage.

It has a desktop di computer for recording bass guitar and it does the job. It will give you any extra volume.

Why We Like This:

Works great as a secondary di box
Good sound, no static in the line and very inexpensive
Good investment for long term

Best With feedback: Pyle Passive DI Box For Bass

Buy on Amazon

Compared with other box in this category, the pyle passive di box for bass has a convenient design. This device also has some ground lift switches that can prevent ground loops. It reduces stage clutter, noise and signal loss from long instrument cable runs. The transformer isolates your PC from the mixer's phantom power. You can even plug your guitar, bass or keyboard amp’s speaker output into the pdc22, which can handle ratings and still deliver a perfect signal.

The purpose of this box is to convert unbalanced to balanced for noise reduction. It allows you to easily connect keyboards, guitars & outboard signal processors. These are great for a permanent installation, or for musicians who don't do a whole bunch of traveling. They also allow you to set input levels via a switch just in case your input is hot.

Why We Like This:

Good, inexpensive and dual in and out
Excellent to isolate noise and hum from external source
Clean strong signal and versatile with ground lift and input pads

Best For synth: Radial Engineering Passive DI Box For Bass

Buy on Amazon

We know from years of feedback from readers, customers and amazon sellers, what most people want in a convenient and appropriate box. The radial engineering passive di box for bass is exactly that - it's a simple box that hits all the right notes. These DI's are built like a tank, no hums, no problems. They're bulletproof, indestructible, and sound great. The direct box is intended to take an unbalanced, line level, signal as the input. It also provides isolation, attenuation, and ground lift.

This direct box is excellent for eliminating noise in the line. It's pro-studio grade quality, works perfectly, and won't comprise your audio signal in the slightest. It does not require a battery and works very well to reduce noise and provide a clear sounding signal. The ground lift and pad make it so versatile that it's nearly idiot-proof, indestructible, and sound great.

Why We Like This:

Hums or any kind of distortions, the sound quality is real good
Buzz / hum, quiet as a church mouse
Brilliant, pure sound without any unwanted added noise

Best For PRESENTATIONS: Hosa Passive DI Box For Bass

Buy on Amazon

The hosa passive di box for bass should be able to handle its purpose and duties with ease. This little box works great, sounds good, and accommodates xlr and 1/4" output so you can feed the pa and your drummer's fancy in-ear monitor system at the same time. It's solid, functional and robust. It's "adequate" if connected just right and you don't need a 1/4" output. It even comes with a built in unbalanced XLR MALE microphone input as a bonus with it's own LINE switch.

It needs an official manual, but overall it's a nice, inexpensive direct box. The Gain controls on the soundboard can be kept much lower, with volume being controlled primarily by the channel volume sliders, as it should be. This almost makes it sound like a person could run a speaker cable from a power amp to this box. It is a very well-made, heavy gauge, steel box with standard-sized holes for connectors/switches (like Neutrik), and is very nicely finished.

Why We Like This:

Inexpensive impedance match box that does the job
Absolutely clean and silent operation, no hissing or buzzing
Lot of satisfied buyers

Best For home recording: Donner Passive DI Box For Bass

Buy on Amazon

The donner passive di box for bass is the best convenient box on the market today. It is a compact passive direct box that is perfect for guitartbasses and keyboards. It is augmented with a ground lift switch that lifts pin-1 on the xlr for quiet, professional results. It’s super simple to use and the parallel output makes it useful if you want to run your guitar into a mixer and amp. It comes with tartar sause and it is great as a dual outpt.

This direct box is durable, sounds great, and won't break the bank. It is magical in its ability to handle extreme signal levels with a natural compression that is pleasing to the ears. It’s easy to use and sounds great for any type of recording session. There is nearly no complaints, it’s small and versatile, it’s simple and effective, and all this for only around $30, yes please.

Why We Like This:

Inexpensive and straightforward, will definitely recommend to anyone else starting out with home recording
Power supply and no battery needed
Good investment for long term

Best For Stereo sources: Mackie Passive DI Box For Bass

Buy on Amazon

Compared with other box in this category, the mackie passive di box for bass has a convenient design. An essential tool for every musician and engineer, the mdb-1p passive di has everything you need to adapt unbalanced, high-impedance audio to a balanced, low-impedance output with minimal noise. It features dual 14 high-impedance inputs with thru outputs and. It can use as stereo, two inputs with separate xlr outs, or one input with two separate xlrs out. It is great with no buzz or hum.

This is a line-level signal converter to an XLR output. They make it easy to get clean, low-noise audio to a mixer no matter what instrument you are using. This is an “active” DI box, meaning that it needs a battery or phantom power from the mixer.

Why We Like This:

Provide a clean, high resolution signal
Very solidly built, quiet, with many useful features
Tons of flexibility, small enough to fit on a pedal board, and quiet

Best For streaming of radio station: ART Passive DI Box For Bass

Buy on Amazon

The art passive di box for bass should be able to handle its purpose and duties with ease. A mixer brings various sound inputs together and outputs one sound mix. It DOES have a ground lift on each channel. There are a lot of buttons to select pad levels, ground lift, etc. The input attenuator switches allow for a wide range of signal levels and the input thru jacks allows for tapping off of your signal chain. It will even convert some speaker outputs to balanced XLR with the.

The ground lift switches let you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise.

Why We Like This:

Fits into a side pouch on a backpack
Low noise and lots of functionality
One of the new comers and featured product

Best For signal switching: Joyo Passive DI Box For Bass

Buy on Amazon

Joyo makes beautiful and great box with classic and smartly choosen materials. If you're serious about your music, this is definitely a piece of equipment you should consider adding to your setup. It's like having a superhero on standby, ready to swoop in and tackle any ground loop problems. The passive reamping function allows you to take a pre-recorded bass (or guitar) track and send it through the amplifier, adding a layer of depth and texture to the original recordings. It's easy to use, versatile, and provides exceptional sound quality.

There's no ground buzz or hum present with this box and it provides a VERY clean signal. The active DI is perfectly clean and uncolored. It's used for both performance and recording purposes, making it a great investment for any musician or producer.

Why We Like This: