The 9 Best patch panel Punchdown Tools (2023 reviews)

The westonetek impact tool's high-end materials makes sure that it ages well with use. The cutno-cut blade function is essential when you have to daisy-chain a termination. It comes with a 110/88 punch and punch/cut blade, as well as a 66 punch and punch/cut blade. The punch tool works easily and cuts off the excess leaving the 110 block looking good. The extra wire stripper makes wire cutting more convenient. The tool is easy to use and the side tools are useful also. The bit stays firm in place but is very easy to remove. This is a low cost punch tool for cabling.

Why We Like This:

Easy to use and cut the wires very well
Simple to use and worth the money
Delivers what they promise

Best For keeping labor hours: Fluke Networks patch panel Punchdown Tool

Buy on Amazon

We would, of course, be remiss if we didn't mention fluke networks patch panel punchdown tool for daily purpose. If you are terminating a high number of jacks, this tool is worth its weight in gold. Not only is this tool a HUGE time saver, the consistent, accurate & professional technique is it's PARAMOUNT result everytime. The JR-ORT-2 is meant to be used only with Ortronics TJ5E00, TJ600, and TJ610 jacks. It reduces hand fatigue and it is seated in the connector, eliminating the need for a secondary trim step.

This is a great tool for adding punch down keystone jacks. It does speed up the process of terminating network jacks, but it also makes it a lot easier to terminate wires that are hard to reach places. Honestly if you have a flat stable surface, sufficient cable length, and a steady hand, a regular punch down tool is more efficient.

Why We Like This:

Must have for low voltage work
Cuts all the wires at one time and allows for immediate visual inspection
Delivers what they promise

Best For Other brands of Punch Down Tools: VCELINK patch panel Punchdown Tool

Buy on Amazon

The VCELINK Keystone Punch Down Tool that cutting and punching down are carried out at the same time, with a sharp knife edge and fast punch down, suitable for network keystone jacks, patch panel panel, and patch panel. The 110 blade has one side with a blade, and the other side punches down without cutting. It is easy to use and switch out the blades.

This tool is much better than using tool-less keystone jacks, but it's not sharp and the excess wire has to be twisted and pulled off by hand. The tool is designed backwards, and the yellow should be on the cut side of the punch down. It is suitable for other brands of punch down tools. It can be used as a spare tool, but it looks totally fine as a main punch down tool.

Why We Like This:

A good solid punch tool with all the features
Double cutter head design, cut the excess cables while punching down
Precise blades are interchangeable and reversible between 110 and 66 standards
You can punch down without cutting

Best networking Tool: Southwire patch panel Punchdown Tool

Buy on Amazon

If you often find yourself confused about appropriate and satisfactory tool, southwire patch panel punchdown tool is your end point. This does not punch down like normal punchdowns but its just one solid piece so you kinda have to guess more or less when punching down. The tool does the job needed, it punches down the wires into the keystones and patch panels. It is used for cat5 ho train layout wiring.

Why We Like This:

Works great and very durable being pocket size
Good investment for long term

Best euro Krone style: Westonetek patch panel Punchdown Tool

Buy on Amazon

The westonetek patch panel punchdown tool gives the top-tier tool a run for their money by offering flagship specs at a much more affordable price. This punchdown tool works well for CAT5 cable installation. It is designed to not need a punch tool. It creates a safe punchdown connection, crops the wire neatly and fits the tight blade pitch encountered in the usual network connectors. It features alignment guides that assure straight positioning of the wires in the connector. This tool uses a tiny scissor cutter mounted on the side of the head. It not only works, but it also is easy to use as a novice and works the first time.

This tool works excellent for its intended use, however that will not work on the larger diameter wires that are used in a buried underground installation, steve. It works well for CAT5 cable installation.

Why We Like This:

Terminates wire and integrated spring loaded blade cuts off excess automatically
For telephone and computer network installation and maintenance
Small hook to remove any existing wires from socket
Great tool to have if you occasionally do phone, internet or cable work

Best For any property manager: Iwillink patch panel Punchdown Tool

Buy on Amazon

Iwillink offers a variety of tool for personal choice and yet maintaining quality in all the variants. This is a well made punchline tool. It is superior to this Iwillink Punch Down Tool and the yellow one comes with a 66 block blade as well. The spring punch action is easy to use but strong enough to do the job. The handle isn't terribly grippy but it isn't uncomfortable nor cursed with sharp, hard edges.

It is great for making punch down connection for j45 ethernet connections. The blade is reversible with one punch-and-cutoff end and one punch-only. The shape of the bit is such that you can insert it in the holder in any rotation you like. It is easy to change out with other heads if the need arises.

Why We Like This:

Slow is smooth and smooth is fast
Must have tool for custom lan wiring
, 4 stars, decent light-duty budget punch tool

Best For Keystone jacks: true Cable patch panel Punchdown Tool

Buy on Amazon

The true cable patch panel punchdown tool's superior materials makes sure that it ages well with use. This handy kinetic energy impact punch down tool comes with a 110 termination blade with termination-cut and termination-only reversible ends. It is constructed of high impact ab plastic. It is longer lasting and more consistent in operation than any other on the market. It includes an integrated swing-out hook tool for easy copper conductor removal from the idc block if re-termination is necessary. It is great for terminating keystone jacks and patch panels. It is also enhanced by rubberized tpe offering all-day comfort.

Why We Like This:

High end professional quality networking tool
High and low impact settings to allow for different conductor sizes
Lot of satisfied buyers

Best For Ethernet: Leenue patch panel Punchdown Tool

Buy on Amazon

The leenue patch panel punchdown tool's high-end materials makes sure that it ages well with use. It comes with a knife head storage room, convenient and practical, which can prevent the loss of the knife head outside. It is used for cat3 cat6 cat5 network cables. It is made of hardened alloy steel and nickel plated to ensure long life during use,reducing the frequency of replacement. It can easily remove the excess cable and ensure the accuracy of typing. It is suitable for network keystone jacks and patch panel. It is a good tool for cloud data center, network engineering, enterprise network cabling, internet cafe, and home improvement.

Why We Like This:

Lot of satisfied buyers
Delivers what they promise

Best For long time operation jobs: Vivoch patch panel Punchdown Tool

Buy on Amazon

The vivoch patch panel punchdown tool is satisfactory and appropriate and fits well with your daily usage. This tool can punch down wire at 5 pairs of wires. It is perfect for long time operation jobs.

Why We Like This: