If you are looking for collection of best polyethylene foam hotwire cutters,
This page is just for you.
Our review process:
After carefully scanning almost 70 cutters, we have arrived at these products.
Our final set has reliable products and we also managed to maintain variety within our picks for personal choice.
We have been surveying these cutters for more than 2 years. We have probably handled more products and accessories than almost any team on the planet, so we have a particularly experienced perspective and depth of knowledge when it comes to these items.
Pick the one you want among the presented or you may blindly pick the first option.
Note: It doesn't mean that the cutters that aren't mentioned here are bad. We picked these because these will help most of the people.
Buy on Amazon
If you often find yourself confused about good cutter, gochange polyethylene foam hotwire cutter should be your first option for buying. It is good for small hobby projects, or detail work on large pieces. The wire attachment cuts the pink foam very easily and cleanly. It's a strong quality product, heats up in 10 seconds, generous length power supply cord and much more. It works great and is relatively quick.
The tool heats up quickly and cuts foam very well. It has enough power or heat to cut it, and might melt it and run out of heat with plastic. It is easy to cut out the shape without leaving black marks.
Why We Like This:
Heats up fast and great value
Three different attachments that heat up and cool down fast
Buy on Amazon
We would, of course, be remiss if we didn't mention romech polyethylene foam hotwire cutter for daily purpose. It takes a bit to get the hang of cutting styrofoam. It is suitable for commercial and industrial use, it can cut lightweight foam, kt board pink foam, polyurethane, polyethylene, expanded polystyrene (eps) and extruded polystyrene (xps), styrofoam, polyester foam, sponge, rubber etc. It includes a few blades, a cleaning brush, and a little wrench for tightening and loosening the blade holder, all in a compact hard case.
It is easy to use, but the blade cools off where it is cutting so you need to do a saw type motion to expose the hotter part of the blade as you move along. It comes with no dust or polystyrene filings left behind, cleaning up is easy. It has a three prong or two prong plug.
Why We Like This:
Does not get real hot and is not easy to turn while cutting foam
Highly recommend for outdoor acrylic or polyester fabric
Works well and has the power to cut through 1” line
Works great at cutting 6 inch thick extruded polystyrene
Buy on Amazon
Not everyone likes to purchase cutter for their daily purpose, but the cooltop polyethylene foam hotwire cutter would be an anomoly. There are plenty of different cutting tools to use with this kit, which is great for all kinds of different types of cuts and materials. It is suitable for foam carving, commercial artwork, advertisement design, art piece creation, diy craft projects and christmas decor in home & school. It's easier and cleaner to cut with heat to use an exacto knife and have all the foamy pieces coming off and making a mess. It is hot enough to be applied on different kinds of materials, such as foam board, foam block, pearl cotton, epp, kt board, eps and so on.
The hot wire cutting pen can cut foam board or foam block from any angle smoothly and efficiently. It is easy to replace the wires or holing tips during working, making the process convenient and time saving. The foam cutter is easy to use and get great results.
Why We Like This:
Works pretty well for cutting foam board
Worked good on cutting foam for model train layout
Buy on Amazon
The hercules polyethylene foam hotwire cutter's superior materials makes sure that it ages well with use. This cutter is perfect for architects, designers, decorators, artists and teachers to build architectural models, prototypes, model railroad items or scenery, plane and boat pieces and more. It is made of sturdy steel construction. It is 14.5” x 10.5” and is made of a durable co-bonded compound that ensures smooth and easy movement of the work piece. The foot pedal makes the machine very easy to operate.
It is a breeze with the 8500 series, making it perfect for gaming terrain and all types of foam model building. The guide fence on this one is very stable, and the included foot control is a huge bonus, not to mention the circular cutting guide.
Why We Like This:
Incredible quality of cut, zero smoke, amazing foot pedal is very convenient
Very easy assembly, just a few screws, and included instructions are very clear
Buy on Amazon
We know from years of feedback from readers, customers and amazon sellers, what most people want in a convenient and appropriate cutter. The winons polyethylene foam hotwire cutter is exactly that - it's a simple cutter that hits all the right notes. The three interchangeable heads make even the most intricate cuts come out as close to perfect as possible. It cuts like butter and no mess. It’s quick to heat up, and cuts through styrofoam so smooth. The plastic housing on removable tips is cheaply put together, and it easily needs to be glued together or plastic welded.
This set is lightweight, heats quickly and is easy to use. It’s sturdy construction makes it perfect for cutting thick or thin. It's also really smelly and pieces of foam stick to the other attachments. The product is very well crafted and the tips allow you to create any project you want.
Why We Like This:
Easy to use and carve smoothly, heats up quickly
Cuts through foam like,well, like a hot wire through foam
Buy on Amazon
The horusdy polyethylene foam hotwire cutter's material feels more premium than its price would suggest. It allows polystyrene foam cutting almost instantly with the hot-wire tip. It is easy to use and it gets hot very fast. It is great for small hobby projects. It allows users to make cutouts from the center of alphabets without needing to cut though the alphabet. It is easy to use, good quality, heating time is on point. All indicators of the tools are strictly adjusted to help you with the most difficult cutting, suitable for cutting polystyrene foam, smooth and fast, sealed edges clean, without leaving any debris. It is flawless and works perfectly.
Why We Like This:
Would recommend for professional use but perfect for small projects
Buy on Amazon
Next on the list, we've got yet another cutter that manages to win our hearts. It's the genround polyethylene foam hotwire cutter and it's widely considered as cutter that has the most suitable features. It does well on dense construction grade foam that is three inches thick. It comes with this high temperature, it cuts the styrofoam smooth and fast, seals the edges clean, and leaves no debris. It has a protection device, and if it is adjusted to more than 3 grids, it will stop heating. The handle is good thickness and non-slip, so you can get a full grip and won't get strain for large projects.
It's suitable for high density foam, memory foam, nylon fabric and sponge. It has a metal stand holder for resting the heated pen, so you don't have to worry about where to rest it when you want a break from your work. The package also comes with a metal stand holder for resting the heated pen, so you don't have to worry about where to rest it when you want a break from your work.
Why We Like This:
Heats up very fast and is sturdy even when applying pressure to the element
Buy on Amazon
We would, of course, be remiss if we didn't mention aolloa polyethylene foam hotwire cutter for daily purpose. This foam cutting tool is made of high quality stainless metal and has longer service life. It cuts the width of the wire. It comes with a wire to solder so it does not melt it. It can get very hot which helps, but the lower the heat the easier to handle its cutting ability.
This will cut foam with ease. It comes with a digital voltage controller, it's easier and safer for everyone to use it. The wire cutter is about 6 inches between the tips.
Why We Like This:
Widely fit most types of foam
Decent tool with nice temperature control that allows to cut fast and smooth
Buy on Amazon
Next on the list, we've got yet another cutter that manages to win our hearts. It's the dominox polyethylene foam hotwire cutter and it's widely considered as one of the best convenient cutter you can buy. It is great to cut insulation foam for a decor project. It works well cutting through 3” xps foam. The edge of the " blade " melts the material from the side to the side. It has 16 positions to adjust temperature and power. It doesn't need to be set very high to slice through foam like a literal hot knife through butter. It is very hot and powerful. It provides efficient tools for professional engineers to use. They get really hot and you have to move slowly through foam. It is very suitable for use in stores and packing houses.
Buy on Amazon
The minova polyethylene foam hotwire cutter is capable of outshining several other cutter featured in this list in overall features for the price point. The Minova hot wire foam cutter is able to operate at 27 watts, which is more powerful than any other foam cutter competitors on the market. It cuts smoothly and cleanly. It comes with the temp control knob, so you can set the wire or the tube to different temperatures during cutting to control the cutting speed and precision. It is suitable for foam carving, halloween costumes, handmade exercises and even model building lessons at school. It is also perfect for commercial artwork, complex and small font design in advertising (such as letters), art model making, and diy projects. It is a really helpful tool to keep on hand for projects. It is easy to uselots of fun with crafting.
Buy on Amazon
Compared with other cutter in this category, the jhua polyethylene foam hotwire cutter has a convenient design. This hot knife foam cutter can be bent on the blade to a 90 degree. It makes cutting styrofoam insulation less messy and the cuts are more accurate than using a mat knife or other blade. It's an excellent cutting tool to help you for low density styrofoam cutting, handmade practise, advertising words making, even kids model making. It is hot enough that you can cut through all foams like samurai's sword. It can be heated continuously for 8 hours, which is longer than the normal foam cutter.
This unit has worked wonderfully, retains it's heat, and fires-up every time without any effort. It is an excellent cutting tool to help you for low density styrofoam cutting, handmade practise, advertising words making, even kids model making.
Buy on Amazon
We know from years of feedback from readers, customers and amazon sellers, what most people want in a convenient and appropriate cutter. The hotorda polyethylene foam hotwire cutter is exactly that - it's a simple cutter that hits all the right notes. This Tool is simple to use and works well to cut Styrofoam for packing. It is ideal for low density styrofoam, art model making, students handmade practise, advertising words making, creative model. The needle style heating element makes curves easy to cut. The hot wire foam cutting pen can cut the foam quickly and smoothly, sealing the edges without leaving any debris! The anti-slip of the handle is also very good, so you don't have to worry about slipping out of your hands while working.
The cord is short so you will need to stay close to avoid accidentally falling or unplugging. The foam cutter is easy to work with. You can cut the template or foam block from any angle and then process it into the desired shape. This is much less messy than using a knife on styrofoam.
Why We Like This:
Just perfect, wear a mask, cuts great all styrofoam