Are you planning to buy pwm hubs, and are you confused about the options ? You have landed on the right page.

Our review process: Show/Hide

Our Top Picks:

Best Overall: Buy: Deep Cool Pwm Hub READ REVIEW

Best For Modern Look: Buy: Rmaltake Pwm Hub READ REVIEW

Best With Quick Shipping: Buy: Electop Pwm Hub READ REVIEW

Best For Cable Management: Buy: Xmsjsiy Pwm Hub READ REVIEW

Best For Temperature Control: Buy: Yellow Sand Shell Pwm Hub READ REVIEW

Best For Number Of Revolutions: Buy: N/D Pwm Hub READ REVIEW

Best For Low Cost: Buy: Id-Cooling Pwm Hub READ REVIEW

Best For Step: Buy: Skineat Pwm Hub READ REVIEW

Best Overall: Deep Cool Pwm Hub

Buy on Amazon

If you often find yourself scrambling for a good hub, deep cool PWM hub should be your first option for buying. The deep - cool PWM hub looks good and it is very strong. Make sure this fits by entering your model number. Also, it is able to extend up to 4 fans and is compatible with 3-pin/4-pin fans.

Finally, the deep - cool PWM hub is better than fan splitters and it works well for low profile.

Most buyers find that the hub looks good, has a nice long tiny cable, and is very small so it's almost invisible in the computer. Further, they say that the hub will run at a constant speed the whole time. Moreover, a few say that the hub takes multiple PWM items and controls them with one signal. To sum up, most buyers agree that the hub suits them best, and no one questions it.

• This is good for quality with quantity and it works fine.
• It is very good, is very happy and it is built with low noise adapters.
• This is great for less cables and it is really powerful.
• Only the speed of fan 1 can be identified by the system.

Best For Modern Look: Rmaltake Pwm Hub

Buy on Amazon

The rmaltake PWM hub might be a relatively new release, but it's still nothing short of impressive this year, thanks to multiple price cuts and added new features over the past few months. The rmaltake PWM hub has outstanding value, it is safe and has a good design. Powers up to 9 pwm fans simultaneously from psu to prevent stray currents when the fan hub is in use. The new thermaltake ’s pwm fan hub commander fp is capable of powering up to 10 independent pwm fans, which allows users to saturate the case with fans while maintaining superb cable management.

The hub is built for very well made hubs, buy again, it works perfectly and has a sleek design. Most importantly, the rmaltake PWM hub is for low noise, It works as advertised and has a new design.

Most buyers quickly discovered that the hub includes the controller needed for functioning with the fans. Moreover, a few strongly agree that the hub is not compatible with addressable rgb fans. In addition, a few also found that the fans connect to the hub, the hub connects to a motherboard fan header.

• This allows users to experience the unrivaled airflow and water cooling capabilities.
• As long as it's a standard 3-4 pin PWM fan, it should work.
• This is a good alternative to their commander core which costs 4x as much.
• This can be very hit or miss, but these worked right out of the box.

Best With Quick Shipping: Electop Pwm Hub

Buy on Amazon

If you often find yourself scrambling for an appropriate and satisfactory hub, Electop Pwm Hub should be your first option for buying. The electop pwm hub can also be used, but because 3pin has no pwm function, it is at a fixed speed after inserting. Make sure this fits by entering your model number. The hub has a power source fed from the computer power supply, then the speed is regulated by the speed of the " source " fan.

The hub is a double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Most importantly, the electop pwm hub is based on a system that detects the temperature of the cpu and other heating devices, automatically adjusts the cpu fan speed.

Most buyers found that the hub is an excellent unit and does exactly as expected. In addition, they strongly agree that the hub is great since it draws extra power directly from the psu via molex. Moreover, a few say that this hub is way too useful to dock a star for that though. In short, many have used the hub for more than a few months without letup, and it shows no sign of giving up.

• This is done by voltage, so you will not have rpm control.
• Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces.
• This has dedicated power from the psu, that can't happen.
• The main connector goes to the cpu fan pwm pins on the motherboard.

Best For Cable Management: Xmsjsiy Pwm Hub

Buy on Amazon

Compared with other hubs in this category, the Xmsjsiy Pwm Hub has a convenient design. The xmsjsiy pwm hub is a pwm argb 2-in-1 6 channel hub with a a 15pin power supply that can supply power to the fan and argb at the same time. Make sure this fits by entering your model number. The computer cpu fan must be connected to the red 4pin fan socket of the extender.

Finally, the xmsjsiy pwm hub is used to fix the hub in the chassis, tool-free installation, and not easy to drop.

Most buyers found that the hub is great for connecting mutiple rgb 3 pin and cpu fans. Furthermore, a few also found that the hub has rgb all within it as well. And, they strongly agree that the hub can be controlled with aura sync.

• This is widely used in pc computer water cooling systems and multiple rgb lighting controls.
• Supports pwm function and automatic fan speed adjustment.
• This is designed with solid materials and it is highly recommended.
• This is made with gold-plated pins, is compatible with aura sync and it is durable.

Best For Temperature Control: Yellow Sand Shell Pwm Hub

Buy on Amazon

Yellow Sand Shell offers a variety of hubs for personal choice and yet maintains quality in all the variants. The Yellow Sand Shell Pwm Hub has a double-sided adhesive tape at the back of the hub to mount to the case or any flat space. You just plug the board into the cpu fan motherboard connection & then sata for power. The other 9 black fan ports can not be adjusted in speed and will copy the power level of what the red port is at.

Above all, the yellow sand shell pwmhub is connected to the cpu fan interface on the motherboard by pwm cable & the red interface is dedicated to the cpu fan.

Most buyers quickly discovered that the hub allows for custom speeds at certain temps and the fans adjusted accordingly. Also, a few strongly agree that the hub is perfect for multiple fan setups. Obviously, this hub passed the test and had very satisfied buyers eager to share their experience.

• This has pay attention and it is an improved backside double.
• Managing multiple fans from a single case input has become easier for you now.
• You then need to connect the fan hub’s pwm cable to the motherboard.
• Connect 1 fan to the red port on the fan hub, then connect the remaining fans.

Best For Number Of Revolutions: N/D Pwm Hub

Buy on Amazon

We know from years of feedback from readers, amazon sellers, and family and friends what most people want in a convenient and appropriate hub. The N/D Pwm Hub is exactly that - it's a simple hub that hits all the right notes. The n/d pwm hub is easy to connect fans, is designed for convenient installation, It is expensive and has an efficient design. Adopts Satan power direct output, which is more concise, more efficient and more stable. The red interface in the cooler master 1to 10pwm hub is used to transmit the fan speed information to the motherboard for adjustment.

The hub comes with a power line direct output, It is safe and has a new design. Further, the hub can still be adjusted in the number of revolutions. Most importantly, the n/d pwmhub works as intended, is powerful, it is worth the money and has a powerful magnetic design.

Almost all customers opine that the hub can connect up to 10 fans at a time. Also, a few strongly agree that the hub will not allow independent fan control. And, a few say that the hub is compatible with any standard 4-pin PWM fan. To sum up, buyers found this to be one of the best hubs for daily purposes.

• This does not provide individual addressability to each connected fan.
• This has paid attention, it has saved space and has a simple design.
• This is a 4 pin PWM fan and can be controlled via bio.
• It is nice to have a cover and magnetic attachment.

Best For Low Cost: Id-Cooling Pwm Hub

Buy on Amazon

Id-Cooling offers a variety of hubs for personal choice and yet maintains quality in all the variants. The Id-Cooling Pwm Hub can support up to 7 fans for a computer, which makes the inside of the pc case look more clean and tidy. Make sure this fits by entering your model number. The 1 to 7 splitter provides a power supply and connectors for pc computer case internal fans.

The hub makes for easy installation, it is easy to use and has a product design. Finally, the id-cooling pwm hub is perfect for these cases, it does the job and has a pwm function design.

Most buyers agree that the hub is perfect for Sama im01. And, a few say that the hub will read the highest rpm fan at the first section. Moreover, a few say that the hub is easy to install and the best utility for a lot of fan case. Overall, most customers found the hub suits best, and no one questions it.

• This offers greater flexibility between the motherboard and cpu cooling fans.
• This is perfect for low profile, it works very well and has a clean design.
• This is expensive and it is great for a decent price.

Best For Step: Skineat Pwm Hub

Buy on Amazon

The skineat PWM hub is the most convenient hub on the market today. The skineat PWM hub provides great value and it works fine. You then need to connect the fan hub’s pwm cable to the motherboard. This fan splitter will work even if only connected to the psu with a sata connector.

The hub can also be used, but the plug is running at full speed, because the 3pin fan has no pwm regulating function. Most importantly, the Skineat Pwm Hub has a double-sided adhesive tape at the back of the hub to mount to the case or any flat space.

One customer says - "You can use the chassis fan port as a signal.. not only cpu. ". They strongly agree that the cpu fan to the adaptor adaptor itself is connected to the cpu 4 pin fan pinout on the motherboard and powered by a sata connection.

• There are thousands of product specifications and models, and support oem and odm.
• This is add 10 solid and it is great for step - by step set-up.
• Connect 1 fan to the red port on the fan hub, then connect the remaining fans.
• The Manufacturer says: we will go an extra mile to redress the situation at hand.