The 10 Best Sbf Thermostat Housings Without Bypass (2022 reviews)

The housing's high-end materials make sure that it ages well with use. The thermostat features all-in-one solutions, simple bolt-on solutions, easy, one-step installation and requires no special tools. Gates coolant outlets provide an improved and cost-effective answer to common design, manufacturing and material issues found in other aftermarket options. These high quality parts ensure an exact fit and easy installation while effectively restoring the cooling system to proper operation and performance.

The thermostat worked perfectly and it had mounting bolts. Finally, the housing is constructed with premium alloy materials and a 100 percent functional test of seals and bearings along with a 100 percent leakage test for both the casting and assembled water pump.

Most buyers found that the thermostat is as good as this new one. In addition, a few strongly agree that the housing comes with a pair of bolts to replace the old hardware, and a gasket. In addition, they also found that the labor would have entailed removing the old thermostat anyway, replacing this would save time & ensure a perfect fit on the new gates water pump.

Top Customer Quotes:

Opens against the flow of coolant from the water pump.
This is made with inferior construction and inconsistent crimping.
Everything you need for a complete repair is included in one assembly.
This is great in a large number of applications.

Best For Very Good Quality: Aa Ignition Sbf Thermostat Housing Without Bypass

Buy on Amazon

The best part: thermostat costs comparatively little and it is available to ship in 24 hours. The housing is a redesigned thermostat housing that features a full aluminium build which eliminates the frequent replacement of this part due to the poor plastic design not withstanding extreme heat causing leaks and failure. The manufacturer says: Save time and money by purchasing this redesigned coolant thermostat housing and take advantage of our lifetime warranty. This coolant theromstat housing is a direct replacement manufactured by aa ignition and comes complete with a lifetime warranty.

The thermostat works great, is great for engine coolant thermostat housing assembly and it allows for very good quality. Also, it is built with quality material, comes with exact parts and it can for customer service. Above all, the thermostat is perfect and it comes with gaskets.

Most customers opine that the housing is easy to install, not right fit at engine coolant temp sensor, thermostat failed <1yr. In addition, they say that the thermostat is a great 100% aluminum replacement/upgrade over the original plastic and aluminum thermostathousing for a 2014 sonic 1.8l. Also, a few say that the thermostat is easy to over torque the bolts if doing it by hand. Therefore, buyers were eager to recommend it to friends and families.

Top Customer Quotes:

This makes for solid construction and it fits perfectly.
This is used for only problems and it worked fine.
This is very happy and it comes with part numbers.
The Manufacturer says: Installing parts on your vehicle can be difficult and we understand.

Best With Bypass: Dorman Sbf Thermostat Housing Without Bypass

Buy on Amazon

The thermostat should be able to handle its purpose and duties with ease. The thermostat has an awesome clean finish and it is reliable. Manufacturer says: We offer an always-evolving catalog of parts, covering both light duty and heavy duty vehicles, from chassis to body, from underwear to underwear and from hardware to complex electronics. This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostathousing on specified vehicles.

Above all, the thermostat offers original manufacturer quality at a lower cost than getting a replacement at the dealer.

Most buyers agree that the thermostat can be used on 88 5.8 bronco. Also, they say that the housing is made of some non-magnetic material. In addition, a few also found that the thermostat is a lightweight piece but works when you're trying to add a second sending unit for an electronic fan sending unit or something else.

Top Customer Quotes:

This is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
They fit well, are made with durable construction and it is best for good fit.
This will fir any 302 with a bypass water pump.
Industry-leading design - professionally engineered by the aftermarket leader in replacement thermostat housings.

Best Neck Design: Acouto Sbf Thermostat Housing Without Bypass

Buy on Amazon

The thermostat should be able to handle its purpose and duties with ease. The housing has passed professional manufacturing, fine processing surface, good performance, and it has a brand new and high - quality aftermarket water neck thermostat housing. Black water neck thermostat housing omes with a thermostat housing, a gasket and two screws, convenient to install and use. Moreover, it is always at your service wholeheartedly. Lastly, the thermostat fits for sb & bb 265 283 305 327 350 383 396 400 427 454 472 502 engines.

Obviously, this product passed the test and had very satisfied buyers eager to share their experience.

Why We Like This:

Manufacturer says: as a professional seller, we provide high-quality products and professional after-sales service.
Delivers what they promise.

Best For Removing Complicated And Bulky Lower Radiator Hoses: Modular Motorsports Racing Sbf Thermostat Housing Without Bypass

Buy on Amazon

Modular Motorsports Racing line of thermostats comes in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. The housing is great for removing complicated and bulky lower radiator hoses. Make sure this fits by entering your model number. And, it is made in the USA by mmr from billet alluminum.

Most importantly, the housing is used for a coolant temp sensor if needed using a 1/2npt to 3/8npt reducer.

Therefore, buyers were eager to recommend it to friends and would-be buyers.

Customers also found that its wise to buy a engine coolant thermostat seal, along with this thermostat.

Why We Like This:

Accepts traditional thermostats/gaskets (not included) (small block chevy thermostat & gates 33616 rubber gasket).
Can be used to adapt -16an to 1.5" hose.
For 1.5" hose (in and out) or -16an (in and out) or combination.
This is perfect for removing factory bypass lines or to adding one.

Best For Stainless Steel: Ateam Performance Sbf Thermostat Housing Without Bypass

Buy on Amazon

For a low asking price, housing has managed to overwhelm their customers by packing as many features as they could. And, the housing is compatible with sbc and bbc chevy engines 283 302 305 327 350 400 396 427 454 502. Make sure this fits by entering your model number. Further, it has design for center out radiators. Finally, the housing is available in standard black color.

One customer says - "arrived quick and was exactly as the ad stated. ". Almost all buyers opine that the housing is a perfect fit for hot rod 1934 ford poop forward co-op.

Why We Like This:

Enjoy his straight up style water neck thermostat housing, black.
This fits perfectly. It allows for a great fit and has a water neck style.
This comes with 2 stainless steel allen bolts and an o-ring gasket.
It comes with 2 stainless steel allen bolts and an o-ring gasket.

Best For Fast Delivery: Speedway Motors Sbf Thermostat Housing Without Bypass

Buy on Amazon

The housing is capable of outshining several other thermostats featured in this list in overall features for the price point. The housing can be flipped over for rh or lh upper hoses, and has two 1/4" npt and one 1/2" npt hole in the back for bypass lines or sending units. The Manufacturer says: Our products are designed, built, and shipped by our very own racers, hot rodders, muscle car fans, and street rod enthusiasts. Moreover, it can be flipped to use right or left side upper hose, making it perfect for double - pass radiators.

Above all, the housing fits small block or big block fits Chevy fits v8.

Without any doubt, this thermostat passed the test and had very satisfied buyers eager to share their experience.

Why We Like This:

Accepts standard radiator caps such as 91015620.
This is built with great parts and it is made with high-quality parts.
Speedway motors is comprised of people, just like you, who love cars.
Gaskets and bolts are included to simplify installation.

Best With Nice Finish: Flashpower Sbf Thermostat Housing Without Bypass

Buy on Amazon

The Flashpower line of housing comes in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. Make sure this fits by entering your model number. . In short, with a 4.1 rating and more than 56 buyers, the house stands as the best choice.

To sum up, many buyers have used the thermostat for more than a few months without any complaints, and it shows no sign of giving up.

Why We Like This:

Precision machined from 6061 t6 billet aluminum.
Swivel water neck 95°,o-ring seal, stainless steel bolts included.
Fits: small block engines 221,260,289, 302, 351w, 1963-2000.
1.5'' id hose outlet is also available at 1.25'' or 16an.

Best For Too Much Money: Ford Sbf Thermostat Housing Without Bypass

Buy on Amazon

If you often find yourself scrambling for an appropriate and satisfactory thermostat, housing should be your first option for buying. And, it works great and it is used for so much money. Whether that means having your perfect dream performance car, or a racing victory. Finally, the thermostat knows what it takes to produce a winning combination, and they have the experience, skills and resources to do it right.

In short, for almost all customers, it was just what they wanted.

Why We Like This:

Package dimensions: 10.414 l x 10.16 h x 10.414 w (centimeters).
Good brand reputation.

Best Water Neck Style: X Autohaux Sbf Thermostat Housing Without Bypass

Buy on Amazon

Not everyone likes to purchase a thermostat for their daily purpose, but the housing would be an anomoly. The thermostat is a non-oem product, accessory included. Replace the old broken one, a good accessory for your cars. Further, it is specifically designed to withstand extreme temperature changes and resist cracking and leaking. Above all, the thermostat is made of material, not easy to rust.

Why We Like This:

Made of durable and practical aluminum material.
The package includes : 1 pc radiator water neck thermostat housing, 2 pcs screws.
Lot of satisfied buyers.