It is important to have the best slip clutch for go kart. We are here to help you pick the best one for your needs from all the best available products in market today.

Our review process: Show/Hide

Our Top Picks:

Best Overall: Buy: Lotfancy Slip Clutch For Go Kart READ REVIEW

Best For Heavy Duty: Buy: Fdj New Clutch READ REVIEW

Best For Great Price: Buy: Bravex Slip Clutch For Go Kart READ REVIEW

Best With Great Service: Buy: Mowtownusa Great Clutch READ REVIEW

Best For Fast Delivery: Buy: Motovecor Slip Clutch For Go Kart READ REVIEW

Best For High Quality: Buy: Lucasng Slip Clutch For Go Kart READ REVIEW

Best For Worth The Money: Buy: Mowtownusa Slip Clutch For Go Kart READ REVIEW

Best For Small Engine: Buy: Parts Club Slip Clutch For Go Kart READ REVIEW

Best For Maximum Torque: Buy: Kioipo Slip Clutch For Go Kart READ REVIEW

Best For Complete Set: Buy: Fdj Slip Clutch For Go Kart READ REVIEW

Best Overall: Lotfancy Slip Clutch For Go Kart

Buy on Amazon

If you often find yourself confused about a good clutch, lotfancy slip clutch for riding kart should be your first option for buying. The Lotfancy Slip Clutch For Go Kart is extremely important to add that it is to extend the rear sprocket diameter. Before ordering, please check your crankshaft size. The treatment for the primary clutch smoking drawback is to change the driveline in order that the general ratio is steeper.

The clutch is perfect for go kart minibike baja mini bike mb165 and mb200, including baja heat, mini baja and the baja warrior. Further, the clutch worked perfectly and it works for part number. Finally, the lotfancy slip clutch for go karts is suitable for single wheel belt direct drive karts with tires no larger than 15" high.

Almost all buyers quickly discovered that the clutch has a 3/4 inch shaft and the proper chain size .measure the shaft across. In addition, a few also found that the clutch will fit a #41 40 420 roller chain. Further, a few strongly agree that the clutch can spin either clockwise or counterclockwise. In conclusion, buyers found this to be one of the best clutch for daily purposes.

• The shaft is keyed and the clutch has a slot that fits the key.
• This allows for great fit and it is effective.
• This does not have a hole for oiling the bushing, etc.
• This will not remain intact under the loads that this clutch will transfer.

Best For Heavy Duty: Fdj New Clutch

Buy on Amazon

Not everyone likes to purchase a clutch for their regular use, but the new clutch would be an anomoly. The Fdj New Clutch has 35 chain, works for any number of teeth, It is good so far and has a perfect design. But what should you do when the kid's fun kart breaks down. Also, the clutch works well and it fits perfectly.

Finally, the fdj new clutch fits Go cart motor auto engine tecumseh clutch 6.5 horsepower motor with a 3/4" bar shaft and 3/16" key way.

Almost all customers opine that the clutch can not be guaranteed, better change another model of clutch. And, a few say that the clutch is great on a mini bike with a Briggs & stratton 3.5hp. In addition, a few strongly agree that the go kart 's 10 teeth clutch 3/4 bore needs a 40/41/420 chain.

• This is designed for super fast delivery and it is good for high performance.
• This fits the shaft of a predator.
• The wonderful thing about this clutch is that it does n't engage too soon.
• This will work on a 3 hp briggs.

Best For Great Price: Bravex Slip Clutch For Go Kart

Buy on Amazon

If you often find yourself confused about the appropriate and satisfactory clutch, bravex slip clutch for riding kart is your end point. The bravex slip clutch for riding kart pulls hard and it has large flange. 100% money-back guarantee, If you're not satisfied, return back to us, no-hassle refund or product replacement. Moreover, this works great and it works on preditor.

Most importantly, the bravex slip clutch for riding kart provides great value and it is reliable.

Most customers agree that the clutch is a 3/4 inch crank shaft then yes. Further, they say that the clutch comes with a 2 year warranty. Also, a few also found that the clutch is great for 69370 predator 212cc. With no doubts, this product passed the test and had very satisfied buyers eager to share their experience.

• Super grade high impact/wear resistant steel, 50% longer lifetime.
• Perfect for: go kart, mini bike, fun kart, lawnmower, 6.5 hp engines.
• This comes with a set of screws, That’s all you will need.
• This is for two different sized chains.

Best With Great Service: Mowtownusa Great Clutch

Buy on Amazon

If you often find yourself confused about the appropriate and satisfactory clutch, Mowtownusa Great Clutch should be your first option for buying. The mowtownusa great clutch installed easily, worked perfectly and it is made with fast shipping. Make sure this fits by entering your model number. And, this has the best price and it is best for good fit.

The clutch is designed for easy installing and it is ideal for heavy duty. And, it is perfect for great quality and it works well. Above all, the mowtownusa has a great clutch and it works fine.

Most buyers believe that the clutch will work, but they are happy thus far. And, a few strongly agree that the clutch fits perfectly on the 6.0 hp power sport. And, a few strongly agree that the clutch is a perfect fit and a good price.

• This is easy to install and great for the price.
• This will be wider than needed though.
• This is installed on a 212 cc predator motor.
• This is easy to install, and works very well.

Best For Fast Delivery: Motovecor Slip Clutch For Go Kart

Buy on Amazon

The Motovecor Slip Clutch For Go Karts is capable of outshining several other clutches featured in this list in overall features for the price point. The motovecor slip clutchfor go kart is better to oil the chain at the same time if the chain gets rough from lack of oil. Centrifugal clutch 3/4” bores 12 tooths for 35 chain, common clutch for 2-6.5 hp engines 2300 prm. Also, the clutch fits any other engines with a 3/4 crank shaft and 3/16” key way, most 5.5 hp clones, 6.5 hp clones and 4-6.5hp motors in all brands.

Above all, the motovecor slipclutch for karts is extremely important and includes two set screws, but the chain is not included.

Most buyers opine that the clutch is designed to be used with 4 cycle engines with common straight keyed shafts. Further, a few say that the clutch is easy to install and holds up very well. And, a few strongly agree that the clutch includes 1 x go kart clutch warm tips.

• The Go kart clutch kit includes two sets of screws, but the chain is not included.
• This has 35 chain, is good for fast delivery and it worked perfectly.
• This is very dangerous. Heat damage will be seen inside the clutch drum.
• Perfect for riding kart,s minibike and fun kart.

Best For High Quality: Lucasng Slip Clutch For Go Kart

Buy on Amazon

The lucasng slip clutch for riding kart should be able to handle its purpose and duties with ease. The lucasng slip clutch for riding kart works well and it fits well. The longer you drive at full throttle, the better off it is for the clutch, because it gives it a chance to cool off before the next engagement. Further, the clutch is made for golf carts and it can be bought for good value.

The clutch is made of high quality iron material, which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation. Most importantly, the lucasng slip clutchfor karts is a problem with new drivers that are unsure of themselves.

Most customers quickly discovered that the clutch is great and very easy in stall. Further, they strongly agree that the clutch will not cause too much stretch on the chain and it works great.

• Tooth:10t; work with #40/41/420 chain (chain not included).
• This is good for fast delivery and it is inexpensive.
• Package included:1 x go kart centrifugal clutch.
• 5/8" bore designed for 6.5hp 212cc engines.

Best For Worth The Money: Mowtownusa Slip Clutch For Go Kart

Buy on Amazon

The features department is where Mowtownusa Slip Clutch For Go Kart truly manages to shine. Make sure this fits by entering your model number. And, the clutch worked perfectly and it was worth the money. To sum up, with a 4.2 rating and more than 1304 buyers, the mowtownusa slipclutch for riding kart stands as the best choice.

Most buyers found that the clutch is made of good quality parts. Also, they say that the clutch is needed on a mini bike or gokart. Moreover, they also found that the clutch came with a set screw. In conclusion, most customers found the clutch is functionally comfortable and no one questions it.

• The clutch has a smooth transition from start to top speed.
• This is perfect for a harbor freight preditor 6.5hp motor.
• Good brand reputation.

Best For Small Engine: Parts Club Slip Clutch For Go Kart

Buy on Amazon

The Parts Club Slip Clutch For Go Kart's high-end materials makes sure that it ages well with use. The parts club slip clutch forgo kart is simple and has a simple design. The Manufacturer says: We offer you a three - month warranty, you can buy it with confidence. The 1 " bore allows this clutch to work with gas engines larger than 6.5 hp.

The clutch is made for use with the common 40/41/420 chain size. And, it is perfect for riding a mini bike. Most importantly, the parts club slip clutch for gokart is designed to be able to move a certain amount of weight.

Almost all customers opine that the clutch comes with a belt and bolts on easily to a 212, 301cc, clone engines. Also, a few strongly agree that the clutch will tell you everything you need to know about this clutch and manufacturer. And, a few say that the clutch can take a beating, be sure and clean and oil after a long ride or really rough duty. To sum up, buyers found this to be one of the best clutch for daily purposes.

• Centrifugal clutch 1" bore 14 teeth, perfect for a 40-41-420 roller chain.
• This allows for horse power, it allows for a great fit and has a perfect design.
• Works with gas engines larger than 6.5 hp (top limit - 13hp).
• You will receive the product in the picture.

Best For Maximum Torque: Kioipo Slip Clutch For Go Kart

Buy on Amazon

Kioipo offers a variety of clutches for personal choice and yet maintains quality in all the variants. Further, the kind of dry clutch is unnecessary to be oiled, or the temperature of the surface will be easy to rise. That also makes the clutch easy to smoke during working. Centrifugal go kart clutch, kiolpo, 13hp gokart centrifugal clutch 1inch bore 14t 14 tooth for 40 41 420 chain. Lastly, the Kioipo Slip Clutch For Go Kart can be used on go kart clutch, mini bikes.

Most buyers quickly discovered that the clutch is pretty straight forward. To add to that, it is a clutch with a 1 1/4 inch shaft. Moreover, they strongly agree that this part will only work with a # 40 or # 41 chain. Overall, most buyers found the clutch is functionally comfortable and no one questions it.

• 🌛A high quality and professional clutch. Engaging speed up to 2300 rpm.
• This clutch is intended for a 1" straight crankshaft.
• Replace the old broken 1inch bore clutch 41 chain.

Best For Complete Set: Fdj Slip Clutch For Go Kart

Buy on Amazon

The Fdj line of clutches comes in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. The Fdj Slip Clutch For Go Kart is perfect forgo kart baja mini bikes mb165 and mb200, including baja heat, mini baja and the baja warrior. Make sure this fits by entering your model number. The clutch onto the crankshaft using a bolt and a washer on the end of the crankshaft, easy to operate within minutes.

The clutch is great for hassle-free return, is great for the complete set and it is comparable to stock. Above all, the fdj slip clutch for go kart is fitment, looks well made and it is compatiable.

Most buyers quickly discovered that the clutch is great for a predator 212cc on a kart.

• New and hot releases.
• Good brand reputation.