The 9 Best small Flush Trim Router Bits (2023 reviews)

The freud flush trim bit is capable of outshining several other bit featured in this list in overall features. It is designed in freud research and development laboratories, and freud's tico hi-density carbide is scientifically developed using titanium carbide, cobalt and tungsten (as well as proprietary elements), to produce a supreme product. It features such as tico hi-density carbide and red perma-shield non-stick coating. The bearing is silky smooth, the cut is clean and burr free and the edge stays sharp, what else could you want.

The cutting capacity is 1 1/2" long without the bearing. These are the bits to rely on for a smooth, burn-free cut. It is quite smooth with the router. It will last many more uses.

Why We Like This:

Perfect flush trimming without marring the surface the bearing rides on at all
Recommended for all uses in a small wood shop
Precise flush cutting, and goes through wood like butter
Worked well to cut out excess plywood

Best For installing miter track: Freud small Flush Trim Router Bit

Buy on Amazon

We know from years of feedback from readers, customers and amazon sellers, what most people want in a convenient and appropriate bit. The freud small flush trim router bit is exactly that - it's a simple bit that hits all the right notes. It can be used in many mill cutters because it is tougher and finer grain and that's where the recommendation for them comes into play for tougher materials. It is designed in freud research and development laboratories, and freud's tico hi-density carbide is scientifically developed using titanium carbide, cobalt and tungsten (as well as proprietary elements), to produce a supreme product. The 1/2" shanks simply provide better centricity as they don't flex or bend under normal use. It cuts up to 1.5 inches flush.

Include an anti-kickback design additionally these are the bits to rely on for a smooth burn-free cuts. It is good for template following or edge jointing.

Why We Like This:

An accurate and professionally made tool
Well made tool with great potential for trim work
Makes clean, flush and great cuts every time
Works really well and keeps everything straight and aligned

Best For cabinet tops: Zokmok small Flush Trim Router Bit

Buy on Amazon

The zokmok small flush trim router bit should be able to handle its purpose and duties with ease. It works well for small projects. The blue bits set is Industrial grade and will have a long-term life and better performance. The blade is C3, which has a higher percentage of tungsten carbide than C2 bits. They are perfectly straight and create a smooth and even cut along the whole surface. The bit cuts easily through the 12" plywood with no tear. It comes with a small case to protect the edge during storage and transport and is labeled so you can quickly find it when needed.

Why We Like This:

Surprisingly sharp, good for the money
Light-duty flush-trim bit for use with pattern template
Carbide cutting edge is sharp and smooth

Best For speaker enclosure: Tackpro small Flush Trim Router Bit

Buy on Amazon

The tackpro small flush trim router bit should be able to handle its purpose and duties with ease. It is an excellent router bit and works well. At the top of the bit (the end that connects to the router), it's solid cylindrical metal until you get to the point where the spiral groove starts to be cut into the shaft. With this spiral bit, the cut is smooth as glass. It offers extreme durability to add to that it is made of solid carbide, with c3 micro-grain tungsten carbide cutters. The bearings on the bit are clean spinning and have zero play in them.

This cuts super clean and makes end-grain routing so much less scary. It has a large amount of reach. It is perfect for speaker enclosure build.

Why We Like This:

Does a good job of clearing debris while cutting
Easily cut through drywall and 1/2 inch plywood
One of the new comers and featured product

Best With Bearing guide: Yonico small Flush Trim Router Bit

Buy on Amazon

The yonico small flush trim router bit should be able to handle its purpose and duties with ease. The Yonico router bit sets feature high hook and shear angles, allowing cutters to slice smoothly into stock resulting in clean and splinter free cuts that are devoid of burn marks. The cutting edge is a fraction of an inch longer than the bearing is so it cuts slightly more than intended. It absolutely kills cutters, or at least dulls them till they hardly work anymore, and need sharpening.

This bit is good with a variable speed router, fixed speed will make the top bearing fly off, and can not perform at high speeds. The top & bottom bearing is a tremendous timesaver. It cuts beautifully without any burn or tear out. The diameter is small, so this can be run at 24k.

Why We Like This:

Yellow finish shows signs of wear after one use
Worked very well for flush trim against a pattern using the bottom bearing
Lot of satisfied buyers

Best With Bottom Bearing: CMT small Flush Trim Router Bit

Buy on Amazon

The cmt small flush trim router bit is capable of outshining several other bit featured in this list in overall features for the price point. This bit works great for straightening up an edge (riding the bearing on a straight edge) on anything up to. The top and bottom bearings make it suitable for pattern following and/or edge trimming. This ensures that any bowing in the straight edge (yes it will happen) will be mirrored on the opposing piece. The slight shearing angle on the two knives really help make a smooth edge and it also helps router on really thick wood.

This is a very heavy duty well built bit, which cuts fast and smooth. This is a large bit, so you need to reduce router speed when using it.

Why We Like This:

Good bit, sharp, trims perfectly flush to bearing surface
Good investment for long term

Best For Solid Wood: Sinoprotools small Flush Trim Router Bit

Buy on Amazon

The sinoprotools small flush trim router bit should be able to handle its purpose and duties with ease. This set includes a useful assortment of 4 different individually packaged & well labeled sharp TC edged router bits. These are all 1/4 inch shanked and have a varying cutting edge flute length of 3/4", 1", 1 1/16ths"and 1 3/16ths. It makes the edges of your wood smooth, without cracking. The bearings feel like they spin smoothly without any noticeable friction.

This router bit stays sharp and has a great edge on it. It is quicker and neater. It is easy to resharpen so hopefully a piece doesn't break off. These router bits are just as good as expected, durable and sharp.

Why We Like This:

Very nice, very sharp, work well
Bits are very sharp, very accurate, and highly recommended
Lot of satisfied buyers

Best For making repeatable patterns: TOOLDO small Flush Trim Router Bit

Buy on Amazon

If you want nothing but the best desirable bit, then tooldo small flush trim router bit is the one you should definitely consider, as it manages to bring a lot to the table. These bits have the standard 14-inch shank and the minimum cutting radius is 14-inch. It can be used for cutting solid wood, particleboard, plywood, mdf and different wood composites. The collets that hold the bearing in place are well constructed and hold fast. It is great for cleaning up edges or tracing cut out patterns.

These are great for routing multiple identical parts to a pattern. It comes with a wrench, 2 spare bearings and 2 stop collars. The set comes with extra hardware, which is nice. It is great for making repeatable patterns from a template or matching a laminate to the substrate profile.

Why We Like This:

Worked great on cutting board templates
Come in two types and also suitable for a home diy shop
Inexpensive but thin carbide cutting edges
Spare bearing and locks are a great addition

Best For soft woods: Spetool small Flush Trim Router Bit

Buy on Amazon

It works better than a regular flush trim bit. It is specialized in manufacturing various cutting tools including cnc router bits, carving and engraving bits, aluminum and metal end mills, grinder burr and other rotary tools for industrial and diy applications. It is perfect for soft woods, hard woods, plywood, laminate, oak, mdf and any hardwood working.

The router bearing bit uses a double ball bearing pilot at the tip to run against your project template to ensure smooth running. These smaller bits are for small finishing cuts and are fine for that purpose. It can be used with a table mount and handheld router with 1/4" collet. It is easy to use and long enough for guitar work.

Why We Like This: