The 10 Best Small Heatsinks With Fan (2023 reviews)

We consider a small heatsink with fan to be a worthy investment in the long run. We are here to help you choose the right one for your needs from all the best available products in market today.

Our review process: Show/Hide

Our Top Picks:

Best Overall: Buy: ineo RPM Fan READ REVIEW

Best For Peltier: Buy: Easycargo Heat Sink READ REVIEW

Best For motor Can: Buy: Nhx Small Heatsink With Fan READ REVIEW

Best For MOSFET: Buy: Easycargo Small Heatsink With Fan READ REVIEW

Best For Heat dissipation: Buy: Geeekpi Small Heatsink With Fan READ REVIEW

Best For NVME: Buy: Elecgear Small Heatsink With Fan READ REVIEW

Best For Cooler: Buy: Icy box Small Heatsink With Fan READ REVIEW

Best For RAM: Buy: Geeekpi ARMOR Aluminum alloy Heatsink READ REVIEW

Best For GPU: Buy: Newhail Small Heatsink With Fan READ REVIEW

Best For Motherboard: Buy: ineo Small Heatsink With Fan READ REVIEW

Best Overall: ineo RPM Fan

Buy on Amazon

Ineo line of heatsink come in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. If you want the very best of cooling, active cooling provides the best solution and this ines cooler is top notch. It can be used on low-cost motherboards that do not have a heat sink on the motherboard. It would probably work exceptionally well even without the fan running at all, really. In closing, if you want a cool looking cooler, this is the one to get. It is good when using double-sided nvme products, and when using single-sided products, it would be nice to have a slightly thicker thermal pad.

The heatsinks are easy to install on the drives, so you just make a little sandwich with the base plate, thermal silicon, ssd, thermal silicon, and heatsink. It works well but does take up space. This product will show the best performance.

• Noise for automatic speed control and ultra
• Cools ssd down by 20 degree celsius
• Works great from 39 celsius to 34 celsius
• Great option for pcie4 m.2 ssds

Best For Peltier: Easycargo Heat Sink

Buy on Amazon

Best part: easycargo heat sink costs comparatively low and it is available to ship in 24 hours. It works great for turning freezemod aluminum RAM cooler jackets, with these coolers you can turn the watercooling function to air and fan cool with three of these things per stick. They dissipate enough heat such that the steppers never get hot enough for the adhesive to wear down and slide them off.

The thermal tape does a good transfer of heat from the CPU to the aluminum. It is also a very food size for the chromecast. It is easy to work with and yet strong enough that the fins don't just break off.

• Pre-applied 3m 8810 thermal conductive double side adhesive tape backing
• Delivers what they promise

Best For motor Can: Nhx Small Heatsink With Fan

Buy on Amazon

Not everyone likes to purchase heatsink for their daily purpose, but the nhx small heatsink with fan would be an anomoly. These things move a ton of air. It is the new nhx 1/8 cyclone dual high voltage, high speed 28000 rpm fan with clip-on heatsink. The fans speeds are incredibly fast and push a ton of air flow. It fits the 40mm motor max 6 and 49mm motor. The fan will fit a 1/8 scale motor. It tends to collect bits of grass and such due to the force of air moving swiftly through the blades. It fits perfect and snug on the spektrum 4074 motor.

• Strong fans, good quality and snaps right in
• Fits and works well but loud
• Many colors great looks and blow super hard
• Moves quite a bit of air and keeps motor nice and cool

Best For MOSFET: Easycargo Small Heatsink With Fan

Buy on Amazon

The easycargo small heatsink with fan should be able to handle its purpose and duties with ease. This heat sink kit can be applied in other devices to cool processor, voltage regulators, vram vga ram, ic chips, mosfet scr, southbridge, northbridge etc. It includes 4 piece raspberry pi 30mm 3.3-5v DC fan and 12 pieces aluminum+ 4 piece copper cooling heat sink set for raspberry pi models a, b, b+, 2, 3, 3 b+ and 4b boards. The heat sinks and the fan reduce the temperature of the CPU by about 10C, which is pretty amazing.

These heat sinks have profiles which are short enough to fit within standard raspberry pi cases. It should be mounted onto your pi case to provide ventilation. The shielding on the wires is a bit dry. It is easy to install and keeps the rpie nice and cool. It comes with plenty of heatsinks which are easy to install.

• Easy to mount and works flawlessly
• Plenty of extra fans and heatsinks
• Good investment for long term

Best For Heat dissipation: Geeekpi Small Heatsink With Fan

Buy on Amazon

Next on the list, we've got yet another heatsink that manages to win our hearts. It's the geeekpi small heatsink with fan and it's widely considered as heatsink that has the most suitable features. The integrated fan and HS work perfectly to cool the pi even when it's in the garage running 24/7 in the heat of summer 100 deg f on hottest days but no direct sunlight. It fits the latest generation pi 3 b+ and keeps it cool 24/. Not only does it drop the temperature significantly, but it’s also super quiet. It comes with 2pcs little thermal tapes to attach to the cpu and lan tightly for better dissipation. The fan runs quiet as a mouse and the Pi barely gets warm even when run for an extended period.

There are two options for operation when using it with a microcontroller’s GPIO pins. It has worked best for overclocking.

• Relies on adhesive to hold heatsink on
• Installed easily with a 3m type heat conductive material and plugs into the gpio
• Reduced cpu heat by 30 plus degrees c
• Very good thermals, install is sketchy

Best For NVME: Elecgear Small Heatsink With Fan

Buy on Amazon

This heatsink/cooler takes only a minute to install and it works great. It can feel the heat produced by m.2 2280 ssd will be absorbed by the heat pipe and effectively conducted to both the upper and bottom heatsink. The pre-divided small pads are for the main control IC and memory chips, while the big single-sided pad is to apply to the middle frame facing against the bottom of the SSD. It is suitable for pcie 4.0 gen4 nvme.

• Equipped with 4pin 2510 connector fit most of pc
• Low noise level at max rate 9300rpm rapidly cools down your ssd
• Lot of satisfied buyers

Best For Cooler: Icy box Small Heatsink With Fan

Buy on Amazon

If you often find yourself scrambling for appropriate and satisfactory heatsink, icy box small heatsink with fan is your end point. Thanks to the heat pipe technology, the cooler is able to reduce the temperature of your m.2 nvme ssd by up to 50% for a long lasting and stable performance in your work flow. It fits perfect and dissipates the heat well due to its solid construction. It also has nine fins that provide a large surface area for heat dissipation.

It has copper heat pipes transferring to aluminum cooling fins. The installation is easy, and the thermal pad is included. It includes a spacer and extra screw for installation since the cooler adds a little thickness to the M.. It is pretty tall, so if you are looking at it for a microATX or miniITX build, make sure you check your measurements for case clearance as it is just a little bit taller than the stock AMD Tornado CPU cooler and fan.

• Active cooling is actively necessary for modern rigs
• Keeps the drive in sweet spot
• Good brand reputation

Best For RAM: Geeekpi ARMOR Aluminum alloy Heatsink

Buy on Amazon

Not everyone likes to purchase heatsink for their daily usage, but the geeekpi armor aluminum alloy heatsink would be an anomoly. It’s an armor aluminum alloy heatsink, which is only compatible with Raspberry Pi Compute Module. It comes with an adjustable speed fan and thermal pads for better heat dissipation. This is excellent, as the CM4 will begin throttling the CPU at 80 deg or so. It adopts passive heat dissipation. It comes with a screw pack, screwdriver and user manual for easy installation.

• Good brand reputation
• New and hot release

Best For GPU: Newhail Small Heatsink With Fan

Buy on Amazon

The newhail small heatsink with fan is the best suitable heatsink on the market today. This is an active M.2 cooler with a fan, heat pipes, and cooling fins. The design of this cooler is much like a CPU cooler with heat pipes. It comes with a larger 40mm quiet pwm cooling fan. The fan is whisper-quiet and spins up as needed, and the copper heat pipes and thermal pad do a great job of transferring the heat away from the SSD and into the heatsink. It’s also well-constructed out of quality materials.

The heatsink is easy to install and fits securely onto the SSD. If a thicker drive or thicker pads are being used, the ridge is an excellent guide. It installs easily, the very first time.

• At full voltage and full speed, there is noticeable sound
• Designed and effective cooling solution for m.2 2280 nvme and sata ssds
• Highly effective fan for nvme cooling
• Good cooling at the expense of noise

Best For Motherboard: ineo Small Heatsink With Fan

Buy on Amazon

If you want nothing but the best desirable heatsink, then ineo small heatsink with fan is the one you should definitely consider, as it manages to bring a lot to the table. This Ineo M9 Rocket has AMAZING Performance. It comes with pure cooper heatpipes and 30mm pwm fan to make sure excellent heat transfer from m.2 nvme 2280 ssd. It includes thermal tape, screws, and screwdriver. This definitely works if you want to lower M.2 thermals even more than just a regular, passive heatsink. It improves Pc boot time, every game, and program load times.

The movability of the heasink fan makes it ideal for small spaces. It looks and feels well made.

• Just a very cool, effective design
• Highly recommend for keeping things cool
• Good investment for long term