The 9 Best tractor Trailer legs (2023 reviews)

Curt line of leg come in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. Each Curt Marine boat trailer jack is equipped with a trailer jack wheel at the base, giving your trailer enhanced maneuverability without requiring you to fully lift up the trailer tongue. It has an integrated grip for comfortable handling when raising and lowering the trailer coupler. It is greater, meaning it takes more turns to elevate.

The tubing is very thin gauge steel. The jack fits the tongue perfectly without modification and functions very well. The product & the swivel design also makes setup quicker and easier with less raising of the trailer jack leg required. It is easy to replace and is much easier to work.

Why We Like This:

Smooth cranking and effortless turning on handle
Well built, with nice clean welds
New and hot release

Best For Light Duty Trailers: Reese tractor Trailer leg

Buy on Amazon

We would, of course, be remiss if we didn't mention reese tractor trailer leg for daily purpose. It is perfect for a typical boat or snowmobile trailer. The powerful reese towpower trailer jack fits tongues 3 ” to 5 ” and helps effectively raise and lower trailers with a capacity up to 1, 000 lbs. It swings up in line with the trailer frame. It has only 1 gear ratio for fast, smooth usage.

The heavy-duty swivel mechanism with a pull-pin release makes it easy to access the jack when you need it, and store it away when you don’t. It's also zinc electro-plated, and not Hot-dipped galvanized. It works well for light additionally can be used on a log splinter.

Why We Like This:

Plenty sturdy, installs in minutes using standard wrenches and rachets
Sinfully easy to install, works like a champ
Easy to install, cranks up very easy

Best For Camper Trailer: red Hound auto tractor Trailer leg

Buy on Amazon

The red hound auto tractor trailer leg is satisfactory and appropriate and fits well with your daily purpose. These are stabilizing legs. They require constant pressure to keep them at the adjusted height, so anytime there's "bounce" from movement inside the trailer, the legs tend to shorten an inch or two, and no longer provide support. This is great to stabilize the trailer.

These leveling jacks work out very well and they are easy to install and very easy to use. It is easy to install with these telescopic trailer leveling legs. They work perfect there and take seconds to adjust. This is better to support when the stands are down.

Why We Like This:

Adds to stability when parked as well if needed
Easier to remove and make sure they do not come out
Works great with a few tweaks

Best With rear Door: The ultimate Trailer Jack tractor Trailer leg

Buy on Amazon

The Ultimate Trailer Jack has been making great leg for years, thanks to a combination of clever design and appropriate materials. It comes with this jack, setting up your trailer at your destination has never been breezier. This product is great because you can pull the landing pad up flush with the bottom of the trailer frame to prevent dragging and bending up the frame and jack. It allows enough adjustment to pull the base right out of the way. It can be lifted straight up, and all the way over to the point the black handle part is upside down. It also gives way more jack height to unhook easier.

This one raises much higher & is much faster to use. It can be taken off entirely so the tailgate can open with the trailer attached. It is easy to install as any other trailer jack.

Why We Like This:

Simple design, easy install works exactly as designed and promised
Good investment for long term

Best For outside: Curt Trailer Tongue Jack

Buy on Amazon

We know from years of feedback from readers, customers and amazon sellers, what most people want in a convenient and appropriate leg. The curt trailer tongue jack is exactly that - it's a simple leg that hits all the right notes. Curt boat trailer jacks are built to thrive under water exposure, equipping your boat trailer with a dependable support for miles to come. Each Curt marine boat trailer jack is equipped with a trailer jack wheel at the base, giving your trailer enhanced maneuverability without requiring you to fully lift up the trailer tongue. This trailer jack is protected in a durable black powder coat and zinc.

The Curt swivel trailer jack features an integrated swivel bracket that allows the entire jack leg to tilt up and out of the way after hittingching your trailer to your vehicle. It comes with a jack foot plate welded on the bottom, this type of jack provides added stability for your trailer on rough terrain. This allows the boat jack to swivel up and out of the way for travel, providing plenty of ground clearance for your trailer tongue.

The item is of excellent quality, constructed, and sturdily crafted for use. It’s easy to install, nice looking, nice heavy duty cranking handle and it has a grease fitting so you can grease the gears.

Why We Like This:

You can also drill and bolt on
Supplies superior lift and support capacity
One of the new comers and featured product

Best For adding extra lift: Seachoice tractor Trailer leg

Buy on Amazon

Not everyone likes to purchase leg for their daily usage, but the seachoice tractor trailer leg would be an anomoly. From anchors to anodes, Seachoice offers a wide range of products designed to make your experience on the water safer and more enjoyable. It has a maximum load capacity of 2, 500 pounds, so it can be used on trailers that haul significant loads. It includes all mounting hardware and it is designed for mounting on trailer frames of up to 3 inches x 5 inches. It looks really sturdy to add to that works well on the trailer.

There are plates for each side that attach with bolts. The wheeled jacks would lean way over and look as if they were going to fall. It is great for adding extra lift. It is very easy to use since you don't have to turn the handle all the way up and down every time you use it, it has an extra long leg with a pin that you use to adjust it. It will be fine for a car hauler.

Why We Like This:

Very heavy duty and easy to install
Mounts on the outside of trailer tounge no holes needed
Has a zerk fitting so the gears can be greased
Super fast to use but watch your fingers and toes

Best For Rv Camper: red Hound auto Jack stand

Buy on Amazon

If you often find yourself confused about appropriate and satisfactory leg, red hound auto jack stand should be your first option for buying. This stand fits on the inside, instead of the outside of the jack tube, ( like most drop leg accessories) it also has to have a matching grove to accommodate the one on the jack tube. It fits inside the inner tube of the jack. It is simple and fast. It is constructed of heavy duty zinc plated steel and built to last. It makes hooking up and unhooking the csmper earier as you dont need to carry heavy wood blocks and crank the handle as much. It provides height adjustment and a flat foot to the jack.

The holes and indentation lined up perfect. It fits on the inside, instead of the outside of the jack tube, ( like most drop leg accessories) it also has to have a matching grove to accommodate the one on the jack tube.

Why We Like This:

Saves a lot of cranking time
Easy to drop down and put back up
Great add on for a trailer

Best For Rv Trailer: Tenfun tractor Trailer leg

Buy on Amazon

The tenfun tractor trailer leg is capable of outshining several other leg featured in this list in overall features in its price range. These are used on an aluminum landscape trailer. It will provide the stability needed to drive an atv into your trailer. The Stabilizer Jacks are great quality and easy to install. They're the perfect height and provide stability while in the camper.

The bolt spacing of the rotating leg is 3 inches. They're easy to flip down, will not drop down accidentally while driving, and feel very sturdy. It does secure to the folded position but you really have to work with it to get it to the full upright position.

Why We Like This:

Perfect for utility trailers, pop-up campers, motorcycle trailers, cargo trailers, concession stands, and more
Black environmentally friendly electrophoretic paint, not easy to rust
New and hot release

Best For Scamp: Classacustoms tractor Trailer leg

Buy on Amazon

They do wonders for loading cars, motorcycles, or side by side by keeping your trailer stabile and the nose jack firmly on the ground when your trailer is off the tow ball. The stands need to be mounted on a metal surface to be most effective. The leg tension spring protudes out further than the mounting base when the leg is folded, so you cannot fold the leg and lock it in as designed.

These jacks are spring loaded with positive ratchet locking to hold the load without slipping. It can be bolted or welded to the frame. The jacks fold down, and telescope for longer distances.

Why We Like This: