Are you looking for collection of best ultra short throw projector ceiling mounts ?
You have come to the right page.
Our review process:
After carefully comparing almost 100's of mounts, we think the best mount, that suit most people, is metioned as first option below.
Our final set has the best products and we also worked hard to maintain variety within our selection for personal choice.
We regularly update ourselves with the advancements in these mounts since 2 years. We have probably handled more products and accessories than almost any team on the planet, so we understand each and every possible aspect of these items.
We have collected mounts from several brands including viri, epson, wali, dynavista, nc etc., specific to your daily purposes .
Note: Just because we dismiss a mount in the competition section doesn't mean it's not good. The following are simply our picks for the best mounts for most people - you may have specific needs , that make a different mount better for you.
Buy on Amazon
This might work for lighter and smaller projectors (if you can attach the mount above the projector's center of mass, things would be easier), but it's clearly a bad fit for large ones such as the Epson HC. It is crafted from premium quality and heavy duty steel to provide a reliable projector mount with maximum strength and support.
The bracket is for standard projector mounting as long as your projector has the screw mounts on the bottom and the mount is adjustable to fit various size. The bottom part only holds on the last segment with a single screw. The stand also allows you to rotate it left and right and even up and down to get the proper viewing area then you can adjust your keystone setting on your projector. The in-locking pipes are well built and doesn't allow for over extension and avoids any issues. The design of the swirl will let it fit virtually all screw positions. It can be used under normal conditions.
Why We Like This:
Works great sturdy and lots of adjustments which you need with projector
Easy to install and maintains position
Super easy to put together, came with extra hardware
Buy on Amazon
The wali ultra short throw projector ceiling mount gives the top-tier mount a run for their money by offering flagship specs at a much more affordable price. The Projector mount is minimalistic, sturdy and flexible for most adjustments. It includes all hardware including lag bolts with anchors (for concrete, don't use these anchors in drywall) and a range of screws to attach to the projector. It has a plastic washer to keep it from moving. The throw is perfect at 15 ft. and the brightness is very good even in a semi dark room. It's plenty sturdy for holding up your projector so no worries there.
It is still of good quality for a regular sized projector, and includes all the mounting hardware needed.
Why We Like This:
Versatility and ease of setup was amazing
Build strong and holds very sturdy
Swivels in every direction and holds its place without much tightening
Buy on Amazon
The vivo ultra short throw projector ceiling mount gives the top-tier mount a run for their money by offering flagship specs at a much more affordable price. The projector supports an upside dow position. It has more than enough configurations to fit any projector. It is universal, so it can be used with multiple or a single mounting screw depending on your projector model design. It is adjustable so it should be able to fit almost any projector.
The Item is sturdy enough for a modern projector but easily moves the projector if touched or bumped. It has a lateral “swivel” that is near impossible to tighten. It is a bit clunky and not super easy to assemble. The parts are, however, pretty solid and they include the hardware and tools.
Buy on Amazon
Amer offers a variety of mount for personal choice and yet maintaining quality in all the variants. It blends in reasonably well with a regular drop celing, feels sturdy, easy to mount the projector, and you can rotate it as needed to move the projector in or out those few inches you need for a perfect setup. It comes with both a drop down wire and mounting screws for the projector. There is a thin metal cable that you MUST hang on a permanent, load bearing structure above the drop ceiling that will support the panel and projector should the drop ceiling grid fail.
The mount (it uses a full motion cardan joint) allows you to project straight down to the floor if needed. It's strong but not heavy and uses high quality parts to secure your projector. Its unique design, array of drop extensions, and cable management allow the mount to adapt to almost any installation. There is an opening that will allow cables to pass through in the center.
Why We Like This:
High quality and looks very clean
Feels sturdy, easy to mount the projector
Easy to assembly and looks like a professional installation
Buy on Amazon
If you are searching for a satisfactory mount for your daily usage, mountit ultra short throw projector ceiling mount is the ultimate decision. It fits most all standard and ultra short throw projectors on the market. It is designed with a focus on ergonomics, user experience and mobility. It has a very thin plastic cover that covers the bolts that mount to the wall. It works well and is adjustable in distance and 3 axis.
The wall mounting bracket and support arm are well made, sturdy & high quality. The projector holder slides along the 32.5" arm extension and allows you to place your projector at a minimum of 9" from the wall to a maximum of 29.5" from the wall. It will work for short throw and long throw.
Buy on Amazon
We would, of course, be remiss if we didn't mention alzo digital ultra short throw projector ceiling mount for daily purpose. It fits all larger projectors with 3 to 4 mounting screw holes weighing up to. It is, you can articulate the adjustable arms to accommodate a number of positions. The ALZO suspended Drop Ceiling projector mount allows for positioning the projector left/right and front/back to balance the weight so that the assembly will hang straight down from the ceiling. It includes all metal parts and a kit of assembly screws and hardware. It clips on easily enough if you have pliers or something to assist.
It comes with the typical drop ceiling, a medium to heavy projector a small amount of movement or sway will occur when touching the projector. It will save you a lot of time and hassle.
Why We Like This:
Includes scissor clamp and one 8 inch aluminum suspension rod, and screws
Installs quickly, and is plenty sturdy if done correctly
Includes an american written installation manual with illustrations and photos
Buy on Amazon
Viri line of mount come in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. This wall mount is good for short throw projectors. It comes with concrete mollies (which don't really work on drywall) and big meaty screws. It does move freely and you have a 12 x 12 footprint to work with. It has a universal mount. They allow you to really dial in the image. It is easy to install and requires some ingenuity to get the image correctly projected. It’s compatible with ANY projector that has a limited throw range.
Buy on Amazon
This mount is really quite "beefy" for a mini or even small projector. The mounting plate of the projector bracket has four adjustable and freely retractable horizontal axis mounting arms, which is a universal mounting bracket for ultra short distance projectors. The cable channel within the telescoping arm is a nice touch. The 3 adjusting knobs let you dial it in easy.
The projector telescopic bracket hanger must be mounted on concrete or dry wall, otherwise there is a risk of falling. This thing is pretty cool, they really think of everything when it comes to this mount. It is a universal adjustable mount, so you need to apply some technical knowledge to use this mount with any projector.
Why We Like This:
Very solid design with all the necessary adjustments
Buy on Amazon
We would, of course, be remiss if we didn't mention viewtech ultra short throw projector ceiling mount for daily usage. If you want to get an image size less than 100", then this mount can help do it. It fits most short throw projectors. The Mount is really designed for having a projector mounted and pointing directly in line with the arm. It fits 8"/11"/16" wood stud spacing. The plastic covers hide the bolts and wiring very well and looks very professional. The knob adjustments make the final screen adjustments way easier as well.
The projector weighs only 3kgs, the weight capacity of this mount is 10 kg, strong enough to hold the projector. It is made of pretty good steel. The Mount is made of pretty good steel.