The 10 Best _Utv_ Axle Pullers (2022 reviews)

The OTC UTV axle puller's superior materials make sure that it ages well with use. The OTC UTV axle puller worked perfectly. is designed for a great price and it works very well. Pulls constant velocity joints in 1986. Moreover, the puller is very helpful, it works perfectly and has an excellent design.

Lastly, the OTC UTV axle puller comes with this puller, The axle assembly is popped out of the transaxle without damage, thanks to the straight, even pull provided by the slide hammer.

Most buyers quickly discovered that the puller works for small/medium vehicles and also fits a 2011 nissan rogue cv axle. Furthermore, a few also found that the axle fits on the toyota corolla 2004, made in Taiwan. Also, they say that the puller will save so much profanity and time. Overall, many buyers have used the OTC UTV axle puller for more than a few months without any problems, and it shows no sign of giving up.

Top Customer Quotes:

This is great for quickly and easily pulling ford escape cv shafts.
This is a good quality for a weekend job, and is made in Taiwan.
This works perfectly. It is simple and has a heavy design.
This is handy to have and easy to use.

Best For Low Price: Oemtools Utv Axle Puller

Buy on Amazon

Oemtools has been making great axles for years, thanks to a combination of clever design and appropriate materials. The oemtools UTV axle puller worked perfectly, It is used for center bolt and has a special design. The spare locknut lets you use it with a standard slide hammer puller oem 27033 for rear axle flanges. The oemtools front wheel drive hub puller removes the front hubs without damaging the wheel bearing.

The puller works with oemtools attachments as well as other manufacturers' attachments with the same thread. Most importantly, the oemtools UTV axle puller has a universal design that fits most domestic and imported vehicles with independent front wheel suspension.

Almost all buyers found that the axle can be used on a 97 wrangler. And, a few also found that the axle is supposed to be and is well built. Also, a few also found that the puller is great for pushing the cv shaft out.

Top Customer Quotes:

This fits flush to the hub on a 07 camry and works great.
This works relatively well for pulling a brake drum from a volvo 122s.
This is a great tool for when that stubborn axle won't come loose.
yoke and bolt are threaded 5/8 inch x 18.

Best For Pulling An Axle Shaft: Powerbuilt Utv Axle Puller

Buy on Amazon

Powerbuilt has been making great puller for years, thanks to a combination of clever design and appropriate materials. The Powerbuilt Utv Axle Puller can also be used as a slide hammer for dent pulling and gear pulling duty. Make sure this fits by entering your model number. Also, this includes usage instructions and photos.

Most importantly, the powerbuilt utv axle puller comes with a nice case, It is packed great and has a special design.

Most buyers opine that the puller has features for a low price. Also, they say that the axle does pull dents, but it also does bearing. In addition, they also found that note: if this attachment does n't spread inside the axle hole to 90 degrees to the pulling line. In short, the tone of buyers is very positive and we believe that the axle suits the purpose.

Top Customer Quotes:

Made to be the most reliable tools in the market today.
This includes a 1-3/8" - 2-7/8" bearing adapter.
This is used for several suspension fix applications.
This can also be used for pulling dents out of a car 's body.

Best For Almost No Effort: 8Milelake Utv Axle Puller

Buy on Amazon

We know from years of feedback from readers, amazon sellers, and family and friends what most people want in a convenient and appropriate puller. The 8Milelake Utv Axle Puller is exactly that - it's a simple puller that hits all the right notes. The 8milelake utv axle puller includes a grip wrench adapter and a dent puller attachment for sheet metal. Make sure this fits by entering your model number. Further, the puller worked perfectly and it is great with almost no effort. Lastly, the 8milelake utv axle puller comes with a nice case and it has been used several times.

One customer says - "Removed a rusty wheel bearing without a problem, kit costs double at stores in Philly. ". Most buyers find that the axle comes with a good number of attachments, and the price is impossible to beat. To sum up, most customers call the puller suits best, and no one questions it.

Customers say that getting a wheel bearing puller and rear axle bearing remover, along with axle is useful.

Why We Like This:

Pulls flange-type rear axles and most front-wheel drive hubs.
Lot of satisfied buyers.

Best For Optimal Strength: Abn Utv Axle Puller

Buy on Amazon

We would, of course, be remiss if we didn't mention about UTV axle puller for daily purpose. The Abn Utv Axle Puller is perfect for great quality, It is built to last and has a safe design. 4.7-inch t-shaped handle provides a proper grip, while the 3-inch machined threads fit your internal or external 5/8-inch x 18 threaded adapters to remove dents and other vehicle parts. And, the axle works well, is safe for your vehicle and it fits your needs.

The Axle is a family-owned company in South Dakota. Finally, the abn utv axle puller is designed for optimal strength and resistance to rust and corrosion.

Moreover, they also found that this is better than nothing when trying to remove a CV.

Customers discovered that getting a pry bars for cv axle, along with axle is useful.

Top Customer Quotes:

This provides strength and durability, while the t-handle and 5 lb.
The same tool that others are selling for twice the price.
This allows for maximum pull force and it provides great value.

Best For Corrosion Resistance: Orion Motor Tech Utv Axle Puller

Buy on Amazon

The orion motor tech UTV axle puller is capable of outshining several other pullers featured in this list in overall features for the price point. The orion motor tech UTV axlepuller is great for a great price and it has pull cv joints. Manufacturer says: Stainless steel, our cv joint removal set provides strong and dependable service for the long haul. This cv joint puller tool set by orion motor tech is compatible with ford taurus and mercury sable models from 1986 to the present, loosening and removing their front wheel drive axles and hidden retaining rings in minutes.

Most importantly, the Orion Motor Tech Utv Axle Puller is designed for easy operation, provides great value and it is built to last.

One customer says - "Would recommend it, and it is at a very good price. ". Most buyers agree that the puller works for intended use, plus it comes with a case holder. Therefore, customers were eager to recommend it to friends and would-be buyers.

Customers discovered that getting a abn axle popper kit, with this puller made their life much easier.

Why We Like This:

This offers superior durability and corrosion resistance for long use.
Delivers what they promise.

Best For Cheap Plastic Case: Ewk Utv Axle Puller

Buy on Amazon

Best part: EWK UTV axle puller costs comparatively little and it is available to ship in 24 hours. The EWK UTV axle puller comes with 2-leg and 3-leg jaw pullers for internal and external work to provide a variety of combinations to pull axles, bearings, gears, and seals. easily complete a whole range of complicated jobs of pulling on press-fit and flange-type parts. The 5 - pound steel slide hammer constructed of chrome vanadium steel for smooth operation is perfect for professional garage.

Most importantly, the EWK UTV axle puller works well and it is designed for a great price.

"Saves you a lot of money if you are a diary " - says, one customer. Therefore, buyers were very happy to recommend it to friends and families.

Few customers bought rear axle bearing remover, along with the axle.

Why We Like This:

Ewk provides you premium quality tools and the best service with a 12 - month warranty.
This worked perfectly, is made of a cheap plastic case and it works as expected.
New and hot releases.

Best For High Hardness: Dptool Utv Axle Puller

Buy on Amazon

Not everyone likes to purchase an axle for their regular use, but the dptool UTV axle puller would be an anomoly. The DPTOOL UTV axle puller is compatible with land rovers ect. Make sure this fits by entering your model number. Moreover, this is used to press the output shaft out of the drive flange, grip with tire iron in so doing. Lastly, the DPTOOL UTV axlepuller is compatible with bmw e30, e31, e32, e36, e38, e39, e46, e52, e53, e60, e61, e65, e66, e67, e83, e85, rr1.

Most customers found that the axle is great for removing and installing stubborn axles on an e70 x5.

Why We Like This:

Application: specially designed to install remove hub axle compatible with bmw.
New and hot releases.

Best For Easy Operation: Yoursme Utv Axle Puller

Buy on Amazon

The own UTV axle puller should be able to handle its purpose and duties with ease. The own UTV axle puller comes with a satisfaction guarantee and it allows for easy operation. Position the adapter around the shaft behind the inner boot. This cv joint puller tool set is compatible with ford taurus and mercury sable models from 1986 to current, loosening and removing their inner cv axles and hidden retaining rings in minutes.

Finally, the own UTV axle puller is made of premium forged steel for strength and durability, hardened and finished with oxide, resists rust and corrosion, providing strong and dependable service for a long time use.

Customers found that buying a abn axle popper kit, along with puller is useful.

Why We Like This:

This will create added torque to impose a large pressure on the cv axle.
Attach the inner cv axle puller to your axle slide hammer.
Manufacturer says: we support 12 months’ warranty.

Best Slide Hammer: Kuntec Utv Axle Puller

Buy on Amazon

Next on the list, we've got yet another axle that manages to win our hearts. It's the kuntec UTV axle puller and it's widely considered as one of the most convenient axles you can buy. Also, this includes 9 holes to allow full adjustment that suits different lengths of joint assemblies on most cars. Make sure this fits by entering your model number. Finally, the Kuntec Utv Axle Puller is made of high quality galvanized metal iron material, sturdy and durable.

Without any doubt, this product passed the test and had very satisfied buyers eager to share their experience.

Customers say that buying a axle boot clamp, along with puller is useful.

Why We Like This:

Cv joint puller reduces the risk of damaging the joint, transmission, or other parts.
24cm x 14cm overall dimensions with 100mm maximum cv joint diameter.
Lot of satisfied buyers.