Are you planning to buy 2 wire for photocells, and are you confused about the options ? You have come to the right page.

Our review process: Show/Hide

Our Top Picks:

Best Overall: Buy: Solus 2 Wire For Photocell READ REVIEW

Best For Wide Applications: Buy: Kukuppo 2 Wire For Photocell READ REVIEW

Best For Post Light Fixtures: Buy: Xtremeamazing 2 Wire For Photocell READ REVIEW

Best For Hallways: Buy: Westek 2 Wire For Photocell READ REVIEW

Best For Perfect Fit: Buy: Edishine 2 Wire For Photocell READ REVIEW

Best For Solar Light: Buy: Gama Sonic 2 Wire For Photocell READ REVIEW

Best For Wiring Into A Lamp Or Lighting System: Buy: Vcca 2 Wire For Photocell READ REVIEW

Best Overall: Solus 2 Wire For Photocell

Buy on Amazon

The Solus 2 Wire For Photocell's superior materials makes sure that it ages well with use. The solus 2 wire for photocell allows for maximum wattage and it is made for easy repair. Automatic sensor means no manual operation. And, it feels well built and it provides great value.

The wire is fluorescent and it works great. Also, it is easy to use, is compatible with most bulbs and it works well for direct replacement. Above all, the solus 2 wire for photocell works with most fixtures and bulbs for hardwire outdoor lamp posts, only requires a 1-3/8" diameter mounting hole.

Most customers found that the wire is compatible with existing wiring. Further, they say that the wire was defective until dusk, when it worked. Moreover, a few strongly agree that the shape is designed for a pole, so there are better options. To sum up, buyers found this to be one of the best wire for daily purposes.

• This is supplied with replacement screws.
• This has worked flawlessly for a few months now and has very good light sensitivity.
• This is easy to install, no more than 1 minute.
• It is easy to replace old sensor.

Best For Wide Applications: Kukuppo 2 Wire For Photocell

Buy on Amazon

We would, of course, be remiss if we didn't mention Kukuppo 2 Wire For Photocell for regular usage. The kukuppo 2 wire for photocell installed easily and it has a lock nut. The swivel base can be positioned at the precise spot, focusing light on where you need it to be is effortless. The photocell in the outdoor lighting control senses sunlight and auto turns on at dusk / off at dawn.

The wire is great for controlling outdoor area lights, post light, porch lights, yard lights, floodlights, entry lights, driveway and walkway lighting. Also, the wire has a threaded diameter and it works fine. Above all, the kukuppo 2 wire for photocell works great, is good for simple installation and it is sturdy.

Most customers agree that the wire is easy to install as a replacement for another model. Also, a few also found that the wire is a great sensor been in over two months. And, they say that the wire is designed for a 1/2" conduit.

• 277v photoelectric switch sensor is ul listed to ensure quality and your safety.
• This is the ideal dusk-to-dawn outdoor lighting sensor switch.
• These fit a standard 1/2 knock out hole in any electrical junction box.
• This protects the sensor against weather elements such as rain and dust.

Best For Post Light Fixtures: Xtremeamazing 2 Wire For Photocell

Buy on Amazon

The Xtremeamazing 2 Wire For Photocell's material feels more premium than its price would suggest. Moreover, the wire turns at night and it works great. Outdoor light controllers for automating lights, lamp posts or lanterns in the driveway and entryway so that your house will be well-lit. Above all, the xtremeamazing 2 wirefor photocell works fine and it works with mercury vapor.

Almost all buyers found that the wires are like a regular switch. Further, they also found that the wire comes with outdoor fixtures.

• Remote control light sensor: heavy-duty case to protect elements can be dustproof,waterproof.
• This can be mounted anywhere in the 100.
• Rated voltage: 110~130vac,rated frequency: 50/60hz,rated loading: 500wtungsten,850vaballast,operate level: 10~20lx on / 30~60lx off.
• This is the perfect replacement photo-eye for post light fixtures.

Best For Hallways: Westek 2 Wire For Photocell

Buy on Amazon

The Westek 2 Wire For Photocell's superior materials makes sure that it ages well with use. The Westek 2 wire for photocell is the perfect choice for any installation. More functional product lines include energy-saving timers, dimmers and lighting controls, as well as an extensive offering of consumer electronics accessories for the home and office. In addition, the wire end coming home to a dark house, simulates home occupancy to deter intruders and requires no seasonal adjustments as with timers.

The wire is fluorescent and it works well for direct replacement. Above all, the westek 2wire forphotocell is built with a plastic housing and it works with mercury vapor.

Almost all customers opine that the wires are all wired to keep the light on continuously. And, they strongly agree that the wire is a perfect light on at the right time in the evening and off at day break. Further, a few say that the time you would want a switch to remove power to the westek or to remove power to the device / light. In short, at the price, they believe that they got a steal of a deal with it.

• This is an exact replacement and it worked great.
• Mounts into ¾” hole in lamp posts.
• This is made for simple installation, is super easy and it goes on at dusk.
• These are smaller but the work is perfectly.

Best For Perfect Fit: Edishine 2 Wire For Photocell

Buy on Amazon

The Edishine 2 Wire For Photocell's material feels more premium than its price would suggest. The edishine 2 wire for photocell works with most lamp posts, coach lights and pole lights. Your lights will turn on automatically at dusk and off at dawn. Moreover, it allows for easy install, is with ambient temp and it is compatible with most bulbs.

The wire is specially designed for outdoor post lamps and pole lamps, plug and play. Most importantly, the edishine 2 wirefor photocell is suitable for wet locations.

Most buyers agree that the wire is used for replacement pole light dusk to dawn sencor. In addition, a few also found that the wire was installed yesterday and had survived its first day of rain. In addition, they strongly agree that the wire is a perfect fit but the gasket for weather proof is too small. Obviously, this product passed the test and had very satisfied buyers eager to share their experience.

• This works at dusk, is input and it is made for wide applications.
• This offers 24/7 troubleshooting and hassle-free return policies through Amazon.
• This has a threaded diameter and it is built for easy installation.

Best For Solar Light: Gama Sonic 2 Wire For Photocell

Buy on Amazon

Gama Sonic offers a variety of wire for personal choice and yet maintains quality in all the variants. The Gama Sonic 2 Wire For Photocell is made of durable cast aluminum and real beveled glass panes. Featuring a color temperature of 2700k. The integrated photocell sensor can detect light and will automatically turn on at dusk and off once the sun comes up.

The wire is strong, it is perfect for simple installation and has an elegant design. Moreover, it will shine for up to 10 hours with a single day’s solar charge. Lastly, the gama sonic 2wire forphotocell is constructed of cast-aluminum, making it able to withstand all weather conditions, day and night.

Most customers found that the wire is the summer time, and the light turns on till 3. In addition, they say that the wire is easy to assemble and install. Further, a few say that the wire is good sun hours for solar light.

• The light gives a soft white glow that is plenty bright and long - lasting.
• This has to be the best solar carriage wall lights ever.
• These are a little pricey, but so worth it.
• Energy-efficient solar-powered lamp with a historic 19th century gas-light design.

Best For Wiring Into A Lamp Or Lighting System: Vcca 2 Wire For Photocell

Buy on Amazon

Best part: Vcca 2 Wire For Photocell costs comparatively low and it is available to ship in 24 hours. The vcca 2 wire for photocell installed easily and it is designed for easy installation. If you can’t cover the control with tape, try covering the photo control with the shipping carton to simulate night conditions. The heavy duty body & waterproof cap protects the sensor against weather elements such as rain and dust.

The wire comes with a photocell light sensor, the outdoor lighting remote control can sense the amount of sunlight and automatically switches on at dusk and off at dawn, energy saving design. Moreover, the wire is ideal for putting outdoor lighting, controls driveway and walkway lighting, post lamps, pole lanterns, yard lights, twin floodlights, area lights, coach and entry way porch lights. Above all, the vcca 2 wire for photocell has ip65 protection rating for outdoor use.

Almost all buyers found that the wire is perfect once installed, pointing away from the light. Also, a few also found that the post eye light control switch photocell light sensor works as advertised and it is easy to install.

• This is perfect for wiring into a lamp or lighting system requiring photoelectric automation.
• This worked perfectly and it works great.
• Lot of satisfied buyers.