The 8 Best 292 Chevy Intake Manifolds (2022 reviews)

Edelbrock offers a variety of manifold for personal choice and yet maintains quality in all the variants. The Edelbrock 292 chevy intake manifold is for vortec heads and it has better throttle response. Make sure this fits by entering your model number. The edelbrock performer intake manifold delivers superior performance with square - bore carburetors.

The manifold is made of aluminum with a natural finish. Above all, the Edelbrock 292 Chevy Intake Manifold works great with carb,s is brand new and it is accurate.

Almost all customers opine that the manifold is designed for more stock engine's 0 to 5500rpm...the 7101 is a high - rise dual plane. In addition, they say that the manifold make one that will this one is for sbc. Also, a few also found that the heads curved up close to the valve covers the seat.

Customers say that getting a 292 chevy intake manifold, along with manifold is useful.

Top Customer Quotes:

This is built to match larger plenums and runners are designed for free flowing exhaust.
This is perfect and has plenty of low end torque.
This is safe, works great and it can ask for better than stock.
This fits older pre 1986 blocks.

Best With Part Number: Gm 292 Chevy Intake Manifold

Buy on Amazon

The Gm 292 Chevy Intake Manifold gives the top-tier manifolds a run for their money by offering flagship specs at a much more affordable price. The gm 292 chevy intake manifold is very easy, is great for good quality and it is compatible with part numbers. Recommended replacement part for your gm vehicle's original factory component. In addition, it is most, perfect for exact replacement and it is limited.

Lastly, the gm 292 chevy intake manifold is manufactured to gm oe specification for fit, form, and function.

Most buyers found that the manifold is easy to install, fits perfectly and fixes problems. Also, a few also found that the manifold is for a 2013 chevy cruze 1.4. Further, a few strongly agree that the thing connected to the bottom of the manifold that has the vacuum lines attached to it ... that 's a solenoid that controls the bpv valve. It has a constant source of vacuum from the chamber. In short, the tone of buyers is very positive and we believe that the manifold suits the purpose.

Top Customer Quotes:

This comes with a check valve, orange rubber nipple, bolts and gasket already.
This will only fit only Chevrolet and buick.
The tube that crosses over from the intake manifold to the turbo.
This is compatible and it makes for an easy install.

Best With New Part: Dorman 292 Chevy Intake Manifold

Buy on Amazon

Dorman offers a variety of manifold for personal choice and yet maintains quality in all the variants. The Dorman 292 chevy intake manifold is engineered and manufactured in the United States of tough nylon polymer to resist cracking and warping. Make sure this fits by entering your model number. This manifold often leads to failure in the valve cover 's pcv diaphragm.

Above all, the Dorman 292 chevy intake manifold works for engine light, works great and it keeps it clean.

Most customers agree that the manifold can be used on a 2014 chevy cruze. And, they strongly agree that the manifold made in the USA" stamped on the part and the quality reflects this. And, they strongly agree that the manifold will prevent waiting for a separate order and shipping. Overall, buyers found this to be one of the best manifold for daily purposes.

Top Customer Quotes:

This provides for easy replacement, it comes with direct fit and has a product design.
This is the updated version of gm's most troublesome part.
The fuel rail screws from the stock manifold will not work with this manifold.
This comes with a complete kit and it is designed for good fit.

Best For Great Price: Speedmaster 292 Chevy Intake Manifold

Buy on Amazon

Not everyone likes to purchase a manifold for their regular usage, but the Speedmaster 292 Chevy Intake Manifold would be an anomoly. The speedmaster 292 chevy intake manifold works great and has engine block style. Make sure this fits by entering your model number. Further, the manifold has become a leader in its field, built on a long - term consistency of being a specialist in aftermarket automotive components.

The manifold works fine and has a flange style. In addition, it has now grown to include selling, assembling, manufacturing and racing high performance engine parts. Lastly, the speedmaster 292 chevyintake manifold is also one of the rare companies to produce its own products, where the majority of items are entirely developed and manufactured in its workshops.

Most customers opine that the manifold is quality workmanship and it fits perfectly. And, they also found that the manifold is for a chevy mark a big block with oval port heads. To sum up, the tone of buyers is very positive and we believe that the manifold suits the purpose.

Customers discovered that getting a chevy intake manifold bolt, along with manifold is useful.

Top Customer Quotes:

This is sometimes called an air gap design.
This provides additional power and torque.
This is most, it is great for intake manifold height and has product design.
This is that there is an open area under the plenum chamber.

Best With Bolt Hole Pattern: Tyfyb 292 Chevy Intake Manifold

Buy on Amazon

The Tyfyb 292 Chevy Intake Manifold should be able to handle its purpose and duties with ease. The tyfyb 292 chevy intakemanifold is designed to be used with holley, carter afb or edelbrock square flange carbs. Make sure this fits by entering your model number. And, it is 100% new, never used or installed.

Finally, the tyfyb 292chevy intake manifold will not fit under the corvette hood.

Almost all buyers opine that the manifold is possible if you're using vortex heads. Also, they also found that the manifold is for old style heads, not the vortecs. Further, they strongly agree that the manifold that is shown works with the old style and TBI heads.

Customers discovered that getting a intake manifolds for _chevy_ 327, with this manifold made their life much easier.

Why We Like This:

Carburetor flange type:4-barrel square bore;power range is 1500-6500 rpm.
Fitment:fits 1957-86 sbc chevy engine applications.
Intake gaskets with 1.23" wide x 1.99" tall port holes;material:aluminum;bolt hole pattern:5.160" x 5.625";.
power comparable to single plane manifolds yet retains the throttle response/driveability of a dual plane.

Best For Air Flow: Auto Dynasty 292 Chevy Intake Manifold

Buy on Amazon

The Auto Dynasty 292 Chevy Intake Manifold should be able to handle its purpose and duties with ease. The auto dynasty 292 chevy intake manifold works great and it is good for hose clamp. Make sure this fits by entering your model number. Further, it is very easy and it is thick.

Lastly, the auto dynasty 292 chevy intake manifold is great for fuel pressure, worked perfectly. It is brand new and has a cool design.

Almost all buyers quickly discovered that the manifold was in the back of the cap and screwed the front of the cap. In addition, a few also found that the manifold came with the throttle body gasket as well. Moreover, a few say that the wiring harness running down the side of the manifold on the driver side is secured to the intakemanifold near the front. In short, at the price, they believe that they got a steal of a deal with it.

Few customers bought chevy avalanche knock sensor, along with the manifold.

Top Customer Quotes:

▶️ direct replacement for factory manifold.
This manifold does not use the standard gasket.
This will be where the air inlet duct connects to the throttle.
This looks to be an exact copy of the original.

Best With Popular Aftermarket Square Bore: Jegs 292 Chevy Intake Manifold

Buy on Amazon

The Jegs 292 Chevy Intake Manifold's superior materials make sure that it ages well with use. The jegs 292 chevyintake manifold improved performance, is well and it comes with an adapter plate. Make sure this fits by entering your model number. Further, this fit with popular aftermarket square bore 4150 carburetors including Edelbrock, holley, quickfuel, proform, and more.

Most importantly, the Jegs 292chevy intake manifold fits gm and Chevrolet cylinder heads from 1955 through 1986.

One customer says - "Standard, short or tall valve covers. ". Almost all buyers opine that the manifold is cheaper than some of the Chinese crap. It turns out it is a very nice cast neat and clean. In short, many have used the jegs 292 chevy intake manifold for more than a few months without any issues, and it shows no sign of giving up.

Customers found that buying a chevy 292 distributor and _chevy_ 350 cam kit, along with manifold is useful.

Why We Like This:

Idle to 5500 rpm power band for street or mild race applications.
Fabricated from cast aluminum for weight savings and improved performance.
This is longest and it provides great value.
This is the suit is best and it is great with power band.

Best For High Rise: Weiand 292 Chevy Intake Manifold

Buy on Amazon

The best part: the 292 chevy intake manifold costs comparatively little and it is available to ship in 24 hours. The Weiand 292 Chevy Intake Manifold is designed to improve manifold efficiency and deliver maximum horsepower and torque. Make sure this fits by entering your model number. These manifolds feature a high rise dual plane design with a square bore carburetor flange.

The manifold is fitment, is great for tight fit and it fits perfectly. Above all, the weiand 292 chevy intake manifold works very well, It looks good and has a high - rise design.

Most buyers agree that the manifold is a carb intake and you might need an adapter for the TBI system.

Why We Like This:

Good brand reputation.
One of the newcomers and featured product.