It is important to have the best 4 dust separator. In the following post, we will help you to select the best 4 dust separators.

Our review process: Show/Hide

Our Top Picks:

Best Overall: Buy: Oneida Air Systems Vacuum Hose READ REVIEW

Best For Smooth Surface: Buy: Powertec Dust Hood READ REVIEW

Best For Virtually Eliminating Filter Clogging: Buy: Oneida Air Systems 4 Dust Separator READ REVIEW

Best For Part Time Wood Worker: Buy: Dust Right 4 Dust Separator READ REVIEW

Best For Good Fit: Buy: Taytools 4 Dust Separator READ REVIEW

Best For Light Duty Use: Buy: Taytools Dust Separator Kit READ REVIEW

Best With Durable Construction: Buy: Powertec 4 Dust Separator READ REVIEW

Best For Good Seal: Buy: Deadwood Crafted Tools 4 Dust Separator READ REVIEW

Best Overall: Oneida Air Systems Vacuum Hose

Buy on Amazon

Oneida Air Systems line of separators comes in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. The Oneida Air Systems Vacuum Hose is sturdy and it works as advertised. Injection molded from a translucent anti-static resin, the patented design of the dust deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum's filter, eliminating clogged filters and suction loss. Also, the separator improves separation efficiency by 20.

The separator allows for low noise, works pretty well and it is black. Further, the separator features tapered 2.0" ports for secure fittings with a standard 2.5” to 1.5” vacuum hose. Lastly, the oneida air systems vacuum hose provides superior flexibility and anti-static components significantly reduce the likelihood of static shocks.

Almost all customers agree that the separator is much more thorough, again nothing helps 100. Moreover, they strongly agree that the separator is easy to keep working @ full capacity whereas as a big unit has to be broken down, and is nothing but a major pain and space sucker. And, a few strongly agree that the separator works very well, and the rest of the kit doesn't really add enough value to justify the additional cost over that of the bare tool. In short, at the price, they believe that they got a steal of a deal with it.

• The cyclone separator removes nearly all the bulk of material.
• This is a great little kit to help with tough vac jobs.
• cannot make two 90 degree hose elbow adapters.
• This is perfect for a small woodshop.

Best For Smooth Surface: Powertec Dust Hood

Buy on Amazon

Compared with other separators in this category, the Powertec dust hood has a convenient design. The Powertec Dust Hood is pretty basic and it is priced well. The powertec mini gulp dust hood is the perfect solution for catching dust, chips and debris from your machines. This ab plastic fitting is lightweight and known for its superb durability and abrasion resistance.

Finally, the powertec dust hood measures 13-12" x 7-14" flange 78" wide hood opening inside dimension.

Almost all customers opine that the separator is great value on a dust hood. Also, a few strongly agree that the separator is great for dust collection systems. Further, they say that the separator does a fair job collecting the dust.

• This works well enough, plus it is super easy to mount.
• It is sturdy and it works like a charm.
• The mounting flange has pre-drilled holes for you to use when attaching your device.
• The powertec mini dust hood is made out of high quality abs plastic.

Best For Virtually Eliminating Filter Clogging: Oneida Air Systems 4 Dust Separator

Buy on Amazon

Compared with other separators in this category, the Oneida Air Systems 4 Dust Separator has a convenient design. The oneida air systems 4 dust separator is sturdy and it is made with a great shape. Make sure this fits by entering your model number. In addition, the separator is made of sturdy plastic, is connected together with pvc and it comes with hose fittings.

The separator has a contained unit, is great for high quality plastic and it is important. In addition, this has increased suction power, is flexible and it works as advertised. Most importantly, the oneida air systems 4 dust separator is portable and it makes the deputy smaller.

Most buyers agree that the separator is a common issue with the types of cheap plastic buckets sold by most hardware stores. Further, a few say that the separator is made for the home workshop. And, a few also found that the separator is easy to install with simple supplied instructions.

• This is 20.00 cheaper on the oneida home site.
• This is more of a personal preference rather than a recommendation.
• It is easy to dispose of the dirt and debris.
• Works great but needs adapters to connect to the standard dust collection hose.

Best For Part Time Wood Worker: Dust Right 4 Dust Separator

Buy on Amazon

The Dust Right 4 Dust Separator's superior materials makes sure that it ages well with use. The dust 4 dust separator does the job, It is nice to have and has a good design. It includes an approximately 36'' long flex-form hose to connect to your shop vacuum. The five - caster base of the cyclone dust extractor makes it exceptionally stable and easy to maneuver around the shop.

Lastly, the dust right 4dust separator is sturdy, is perfect for a great tool and it is very stable.

Almost all buyers found that the separator is perfect for the part - time wood worker. Further, they also found that the separator is as good as the tornado shaped separators. In addition, a few say that the provided hose has a hard time staying attached to much of anything.

• This is delayed in arrival, at no fault of the shipper.
• This is a good alternative to the expensive systems.
• Holds twice the capacity of competitors.
• This works well for radial arm saw with a 6.5 hp shop vac.

Best For Good Fit: Taytools 4 Dust Separator

Buy on Amazon

The Taytools 4 Dust Separator's high-end materials makes sure that it ages well with use. The taytools 4 dust separator works fine and it is sturdy. Make sure this fits by entering your model number. The elbow fitting under the inlet side induces a cyclonic air flow inside the bucket for increased efficiency.

The separator is made from strong abs plastic for durability. Above all, the taytools 4 dust separator fits 5 gallon buckets with a maximum diameter of 11-3/4.

Most customers agree that the separator works well after a bit of shopping for hose parts. In addition, they strongly agree that the separator fits a standard 5 gallon bucket well. Moreover, they strongly agree that the separator fits a home depot bucket perfectly. Therefore, customers were eager to recommend it to friends and would-be buyers.

• Elbow fitting on the inlet side to induce cyclonic air flow.
• Inlet and outlet ports accept a 2-1/2” id hose.
• This is flexible and it works as advertised.
• This features a foam gasket for superior seal.

Best For Light Duty Use: Taytools Dust Separator Kit

Buy on Amazon

Best part: Taytools Dust Separator Kit costs comparatively little and it is available to ship in 24 hours. The taytools dustseparator kit includes two elbows, two couplings, two hose clamps and all hardware needed to convert any barrel, trash can, box or custom container into an effective chip separator. Inlet and outlet ports accept a 4” dust collector hose. This cyclone separator collects larger and heavier debris before it can reach and damage the impeller or clog the filter. Above all, the taytools dust separator kit is perfect for use with table, saws, jointers, planers, router tables and much more.

Almost all buyers opine that the separator is great for light - duty use. And, a few say that the separator is easy to install in an old trash can, and easy to empty. And, a few also found that the separator includes everything you need. In conclusion, at the price, they believe that they got a steal of a deal with it.

• Prevents debris from reaching the impeller and clogging the filter.
• This does the job really well.
• This separator works great. very little dust gets thru to the vacuum.
• This comes with it makes for a real easy setup.

Best With Durable Construction: Powertec 4 Dust Separator

Buy on Amazon

The Powertec 4 Dust Separator's material feels more premium than its price would suggest. The powertec 4dust separator is made with anti-abrasion abs plastic. Working in combination with your woodworking dust cyclone, these dust collection fittings combine to give you in-feed and out-feed points when they are utilized with debris & dust buckets, barrels, or boxes. Further, the separator is designed for optimal efficiency.

The separator offers long term durability for high volume usage. In addition, the separator is ideal for both, small and big workshops. Lastly, the powertec 4 dustseparator is a leading manufacturer of high quality woodworking tools and accessories, machines, and an assortment of oem replacement parts.

One customer says - "Converted a card board fiber barrel with a metal lid into a cyclonic dust collector. ". Most customers agree that the separator works well as part of a baffle dust separator. As a result, buyers were very happy to recommend it to friends and families.

• Includes: (2) 4” separator elbows, (2) 4” separator couplers (2) hose clamps.
• One of the newcomers and featured product.

Best For Good Seal: Deadwood Crafted Tools 4 Dust Separator

Buy on Amazon

Deadwood Crafted Tools makes beautiful and great separators with classic and smartly chosen materials. The Deadwood Crafted Tools 4 Dust Separator fits standard 30 plus features a foam gasket for a superior seal. Woodshop dust separator lid for woodworking collector tools in conjunction with a common trash can to improve your dust collector efficiency by converting to a 2-stage unit. The connector inlet and outlet ports accept a 4 - inch ( 10.2 cm ) hose.

Most importantly, the deadwood crafted tools 4 dust separator allows for a good seal, is highly recommended and it works as advertised.

Most buyers opine that the separator can handle the suction force perfectly well. Also, a few say that the separator is easy to install and fits on can well. Moreover, they say that the separator is easy to install and so much easier to empty chips. In conclusion, the tone of buyers is very positive and we believe that the separator suits the purpose.

• It is great to keep the workshop clean.
• This is built to last, is made for table saws and it is easy to use.
• This will crush nearly any trash can.
• This has a tendency to lift the lid, some bungees and weight helped.