It is important to have the well suited 40 manual plasma cut. Let’s take you step by step, type by type, and find the best 40 manual plasma cut for you.

Our review process: Show/Hide

Our Top Picks:

Best Overall: Buy: Jack&Dave 40 Manual Plasma Cut READ REVIEW

Best For Mild Steel: Buy: Lotos 40 Manual Plasma Cut READ REVIEW

Best For Sheet Metal: Buy: Herocut 40 Manual Plasma Cut READ REVIEW

Best With Fast Shipping: Buy: Primeweld 40 Manual Plasma Cut READ REVIEW

Best For Input Voltage: Buy: Hynade 40 Manual Plasma Cut READ REVIEW

Best For Better Price: Buy: Reboot 40 Manual Plasma Cut READ REVIEW

Best For Cnc: Buy: Tooliom 40 Manual Plasma Cut READ REVIEW

Best For Power Cord: Buy: S7 40 Manual Plasma Cut READ REVIEW

Best For Maximum Cutting Thickness: Buy: Bestarc 40 Manual Plasma Cut READ REVIEW

Best For Product Size: Buy: Amicopower 40 Manual Plasma Cut READ REVIEW

Best Overall: Jack&Dave 40 Manual Plasma Cut

Buy on Amazon

If you often find yourself scrambling for a good cut, Jack&Dave 40 Manual Plasma Cut is your solution. Moreover, it is made worth the money and it is used for good buy. Make sure this fits by entering your model number. Most importantly, the jack&dave 40 manual plasma cut works great, it does the job and has a nozzle style.

Most buyers agree that the cut fits an ag 60 cutter. In addition, a few also found that the cut fit a pt 31 and fits cuts 40 & 50. In addition, they strongly agree that the cut is a good quality set with uniformly made pieces and a good assortment. Obviously, this product passed the test and had very satisfied buyers eager to share their experience.

• For 40 50 amp cutting machine.
• This works well on cut 40.
• These tips are not the extended tips so they will be shorter.
• Package include:10 pcs cup, 30 pcs electrodes, 20 pcs ring, 40 pcs tip(common).

Best For Mild Steel: Lotos 40 Manual Plasma Cut

Buy on Amazon

The Lotos 40 manual plasma cut's high-end materials makes sure that it ages well with use. The Lotos 40 manual plasma cut provides high power output for thick metal cutting, as well as steady output for thin metal cutting. Please search "lotos pcs22" or "lotos pcs33. In addition, the cut cut like butter, comes with a good machine, it is easy to move around and has professional design.

Above all, the Lotos 40 manual plasma cut is compatible with Lotos pcon40 or pcon90 consumable sets or any other third - part consumable set.

Most buyers opine that the cut comes in handy for rusty materials. Moreover, they strongly agree that the cut does require a 30 amp breaker. Moreover, a few say that the cut is worth the little extra. In conclusion, many buyers have used the Lotos 40 manual plasma cut for more than a few months without any issues, and it shows no sign of giving up.

• Cuts though rough, painted, and rusty surfaces.
• This works awesome, is impressive, it does the job and has a solid design.
• This works perfectly, it comes with great customer service and has a heavy - duty design.
• This is easy to setup with the regulator and the other parts.

Best For Sheet Metal: Herocut 40 Manual Plasma Cut

Buy on Amazon

Best part: Herocut 40 Manual Plasma Cuts costs comparatively low and it is available to ship in 24 hours. The herocut 40 manual plasma cut works as expected and it works really well. The Manufacturer says: machine comes with a 220v power plug, We provide a one - year warranty for this unit. The plasma cutter easy to cut stainless steel, alloy steel, mild steel, copper etc.

The cut is strong and it is present. Moreover, the cut is input and it is used for input power. Above all, the herocut 40 manual plasma cut is longer and more efficient than the mosfet machine.

Almost all buyers found that the cut works at a voltage of 110+/-15%, In this range, this machine can work at 120v. In addition, a few also found that the cut is compatible with a 30amp receptacle which you then wire for 110v. With no doubts, this product passed the test and had very satisfied buyers eager to share their experience.

• This is sold up, now it is cut45, price higher.
• This will automatically sense the voltage from 110 to 220 volts.
• This is the standard household three prong.
• This will work with less but generally what most real plasma cutters run at.

Best With Fast Shipping: Primeweld 40 Manual Plasma Cut

Buy on Amazon

Primeweld line of cut comes in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. The Primeweld 40 Manual Plasma Cut comes with years of hands-on experience, Primeweld is always available to help with solutions for any project. This plasma cutter is highly portable so you can take it wherever it's needed, from the jobsite to home workshops and beyond. Also, the cut is used for dual voltage, is impressive, it is blown away and has a professional design.

The cut is strong, is worth the money, it allows for higher quality and has a heavy - duty design. In addition, the cut is designed to produce top-quality cuts in stainless steel, alloy steel, mild steel, copper, aluminum and many other types of metal materials. Lastly, the primeweld 40 manual plasma cut is robust, is designed for heavy duty, It cuts current and has an excellent design.

Most buyers quickly discovered that the cut was not written by someone who speaks English. Further, they also found that the cut has a primeweld cut-60 fan pack for $42.00 with a 10 piece quantity right now. Also, they say that the cut improves performance a great deal.

• This is designed to work with cnc.
• This comes with a plug to adapt to your equipment.
• This is a very well built machine.
• This blow back starts with the cnc connection.

Best For Input Voltage: Hynade 40 Manual Plasma Cut

Buy on Amazon

The Hynade 40 Manual Plasma Cut's material feels more premium than its price would suggest. The hynade 40 manualplasma cut is perfect for great quality and it makes for a great little cutter. Manufacturer says: We have focused on the welding business for more than 20 years. In addition, this is even better, it has no issues and has product design.

The cut works great and it is input. Further, this is used for very light weight, comes with extra consumables and it is compact. Most importantly, the hynade 40manual plasma cut is used for digital display, is used for good buying and it can get for a reasonable price.

Most customers quickly discovered that the cut is good for up to 1/4" plate. In addition, a few strongly agree that the cut is best with a 220 volt outlet and higher than 50 psi. Overall, many buyers have used the hynade 40 manual plasmacut for more than a few months without any issues, and it shows no sign of giving up.

• This will blast through a 1/4" plate with some perseverance.
• Manufacturer says: also we have a service team in America.
• This has been a life and time saver.
• This is durable, allows for fast assembly and it is good for input voltage.

Best For Better Price: Reboot 40 Manual Plasma Cut

Buy on Amazon

We would, of course, be remiss if we didn't mention Reboot 40 Manual Plasma Cut for daily purpose. The reboot 40 manual plasma cut is used for dual voltage and it is good for plasma cutter machine. Make sure this fits by entering your model number. Also, this is good for a better price and it is good for fast delivery.

Finally, the reboot 40 manual plasma cut has adjusted the pressure and it is with max rated clean cut thickness.

Most buyers quickly discovered that the cut would ...with pilot arc the torch would strike an arc without touching the metal. And, a few say that the cut is a touch start plasma cutter, not a pilot arc. Moreover, a few strongly agree that the dirtier the tip gets, the more you 'll have to physically touch the tip to the material to get the arc to start.

• This is a high-frequency plasma cutter that will cause interference.
• This is made worth the money and it is even better.
• This is used to cut saddles out to make a swinging picnic table frame.
• This is a 10 year newer model and much cheaper.

Best For Cnc: Tooliom 40 Manual Plasma Cut

Buy on Amazon

We would, of course, be remiss if we didn't mention Tooliom 40 Manual Plasma Cut for daily usage. The tooliom 40 manual plasma cut is designed to worth every penny and it is compact. lightweight 13lb, can be carried and storage anywhere you need. The torch head does not need to touch the metal plate, then it will start arc.

The cut works awesome and it can check for air leaks. In addition, it can effectively cut rough, painted and rusty surfaces, and generates the least slag. Finally, the tooliom 40 manualplasma cut is used for input power and it is great for better cutting quality.

Most buyers opine that the cut is not an air tool like a drill where oil can be mixed into the air supply to lubricate the tools. In addition, they say that the cut is easy to assemble out of the box. In addition, a few strongly agree that the consumables of this model torch ( ag-60 ) can be used. Overall, buyers found this to be one of the best cuts for daily purposes.

• This is grounded, so it self starts.
• This comes with a one - year warranty.
• This is good for cutting out and replacing panels.
• This came with 2 different sized consumable tips.

Best For Power Cord: S7 40 Manual Plasma Cut

Buy on Amazon

The S7 40 Manual Plasma Cut is the most reliable cut on the market today. The s7 40manual plasma cut exceeded all expectations, cuts like butter, It is great for better cutting quality and has a nozzle style. Make sure this fits by entering your model number. Also, the cut is lightweight, it is compact and has a heavy - duty design.

Most importantly, the s7 40 manual plasmacut has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and torch efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag.

Almost all buyers quickly discovered that the cut is good for 110 unless it's below 50% power, which is expected. Furthermore, a few also found that the cut is the cheapest pilot arc unit, and it works well. Further, they also found that the cut will cut 1/4" pretty good but not 1/2. With no doubts, this cut passed the test and had very satisfied buyers eager to share their experience.

• This will go to saving consumables.
• This is a great little machine to cut steel.
• This is good for plasma cutter pilot arc and it has post flow.
• 🛡️plasma cutter can be plugged into 120v / 230v dual voltage using fitting).

Best For Maximum Cutting Thickness: Bestarc 40 Manual Plasma Cut

Buy on Amazon

The Bestarc 40 Manual Plasma Cut is capable of outshining several other cuts featured in this list in overall features for the price point. The bestarc 40 manual plasma cut is stable, is made for quick delivery, it is compact and has a compact design. Make sure this fits by entering your model number. The torch head does not need to touch the metal plate.

The cut is easy to carry around. Finally, the bestarc 40 manual plasma cut comes with a post time function, The adjustment range is 2-15 seconds.

Almost all customers found that the cut is great for making stuff outta sheetmetal like bears and deers to hang on the wall. And, they also found that the cut is a cheap machine, so it's no where near professional grade. Moreover, they say that the cut is pilot arc tried to use it that way. Overall, at the price, they believe that they got a steal of a deal with it.

• This is used for house construction, car maintenance, warehouse maintenance, etc.
• This is designed for maximum cutting thickness, is input and it provides great value.
• This has the pilot arc function.
• This is maximum, it is used for hooking up the lend and has a portable design.

Best For Product Size: Amicopower 40 Manual Plasma Cut

Buy on Amazon

Not everyone likes to purchase cuts for their daily purpose, but the Amicopower 40 Manual Plasma Cut would be an anomoly. The amicopower 40 manual plasma cut is designed for maximum cutting thickness, It is input and has product design. You can achieve better results overall with sharper cuts. Further, it is an intelligent power supply system.

The cut is maximum, is good for input voltage and it is rated input current. Moreover, it is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, plasma torch gun safety protection, etc. Finally, the amicopower 40 manual plasma cut is good for product size, is worth the money, It is made for plasma cutter machine and has an excellent design.

In short, the tone of buyers is very positive and we believe that the cut suits the purpose.

• This is manufactured in accordance with industrial level standards.
• This has automatic temperature control, it is convenient and has a beautiful design.
• This allows the machine to run very quietly.
• This is designed for demanding industrial work and construction and simple tasks around houses.