The 9 Best Arduino Analog Shields (2022 reviews)

Not everyone likes to purchase a shields for their regular usage, but the Elegoo Arduino Analog Shield would be an anomoly. And, the elegoo arduino analog shield is optimized for the original version, mainly for customers under the functional requirements for product quality and high case designed both to ensure consistent and compatible with the original, but also easy to use. It would be an intelligent choice of board for 3d printers, robotics projects and more other projects with 54 digital i/o pins (of which 15 can be used as pwm outputs), 16 analog inputs and a larger space for your sketch. The case the adapter can be connected by plugging a 2.1 mm center - positive plug into the board 's power jack. Finally, the elegoo arduino analog shield is available in 2 attractive colors: blue and black.

Almost all customers quickly discovered that the shield is set by the address that they are given in software, so basically they are capable of both. And, a few say that the shield makes no sense that you get only 5ma out of any pin. Moreover, they strongly agree that this fact alone makes the board appear to be much more expensive than it is. To sum up, most buyers found the shield suits best, and no one questions it.

Customers also found that its wise to buy a _arduino_ lambda shield and arduino analog shield, along with this shield.

Top Customer Quotes:

It is available in both blue and black.
This is a fluke as this is a very nicely made board.
This is easy to use and Arduino ide loves these units.
This was designed in Italy by professors.

Best For Best Value: Seeed Studio Arduino Analog Shield

Buy on Amazon

The Seeed Studio Arduino Analog Shield is suitable and reliable and fits well with your daily purpose. The seeed studio arduino analog shield is very good, It allows for great ideas and has an awesome design. A scenario where you need to read multiple mock values of the DAC output. This arduino ide compatible board xiao is also equipped with a 256 kb flash memory and 32 kb sram.

The shield has 14 gpio pins, which can be used for 11 analog pins, 11 digital pins, 1 i2c interface, 1 UART interface, and 1 SPI interface in such a tiny size. In addition, the shield is strong, it is beautiful and has a very good design. Lastly, the seeed studio arduino analog shield is great little, is built for processing power, It is easy to use powerful and has a low power design.

Almost all buyers opine that the shield is a totally viable option over an arduino nano clone. In addition, they also found that the shield came with stickers for the top side marking of the pins. In addition, a few say that this board is tiny, cheap, and relatively easy to use. Therefore, buyers were eager to recommend it to friends and families.

Few customers got _arduino_ lambda shield, along with the shield.

Top Customer Quotes:

This is perfect for all the projects that need a mini arduino.
Standing at only 23.5 x 17.5, this board is as small as your thumb.
This has a 256kb flash, and a 32kb system.
This is also breadboard compatible, which is very rare for a small board like this.

Best For Lots Of Fun: Keyestudio Arduino Analog Shield

Buy on Amazon

The Keyestudio Arduino Analog Shield is suitable and reliable and fits well with your daily purpose. The keyestudio arduino analogshield has a led indicator and it is great for lots of fun. Pressing nothing to display the value of the analog revolving potentiometer. Further, it is well-equipped with led displays, a relay or two, and resistors to use to turn on leds for error or status conditions.

The shield is compatible with the main controllers on the market, such as rev3 controller and mega2560. Lastly, the keyestudio arduinoanalog shield works great and it can be with product name.

Almost all buyers found that the shield is great for demonstrating arduino programming. Moreover, a few strongly agree that the shield is well - equipped with led displays, a relay or two, and resistors to use to turn on leds for error or status conditions. Overall, the tone of buyers is very positive and we believe that the shield suits the purpose.

Customers say that buying a arduino analog shield and _arduino_ lambda shield, with this shield made their life much easier.

Why We Like This:

This is data, It will start from the second piece like this.
Multi-purpose shield v1 is a learning board based on training.
Alarming and making sound by passive buzzer module.
Using 4 bit led segment displays to display data.

Best With Audio: Dfrobot Analog Sound Sensor

Buy on Amazon

Compared with other shields in this category, the Dfrobot Analog Sound Sensor has a convenient design. The dfrobot analog sound sensor can work at 3.3v, which makes it compatible with raspberry pi, intel edison, Joule, and curie. Make sure this fits by entering your model number. This is a microphone or sound sensor compatible with an arduino which is typically used in detecting the loudness in ambient. An arduino or raspberry pi can collect its output signal and actuate accordingly. Most importantly, the dfrobot analog sound sensor is designed to supply voltage and it is made high-quality.

Customers also discovered that its wise to buy a arduino analog shield, along with this shield.

Why We Like This:

The Manufacturer says: this sensor works best with our audio analyzer module.
Lot of satisfied buyers.

Best With Excellent Quality: Hiletgo Expansion Shield

Buy on Amazon

Hiletgo is known for creating pragmatic and minimalist shields for people on the go, and its line of Hiletgo Expansion Shields definitely falls in line with that reputation. The hiletgo expansion shield is a perfect companion to the nano breadboard and is compatible with both arduino nano v2.x and v3.x. Make sure this fits by entering your model number. In addition, it comes with a power connector, is constructed with excellent quality and it is super helpful.

Above all, the hiletgo expansion shield is designed to facilitate an easy connection between nano and many other devices.

One customer says - "Nifty little board that makes prototyping easy as pie. ". A few strongly agree that the specs on this board state that the vin is 6 - 12 volts producing a stabilized 5v at 1a.

Customers say that getting a custom arduino board, along with shield is useful.

Why We Like This:

14 i/o pin (servo type with gnd, power and signal).
This is used for power input and it is constructed with excellent build quality.
This is accessible and it is highly recommended.

Best With Switch: Hiletgo Arduino Analog Shield

Buy on Amazon

The Hiletgo line of shields comes in a pretty wide variety of styles, so you can definitely find one that suits your individual preferences and needs. The Hiletgo Arduino Analog Shield provides for the arduino joystick and button input expansion. Make sure this fits by entering your model number. The bluetooth module interface has been added, convenient bluetooth wireless serial communication.

Finally, the hiletgo arduino analog shield can switch between 3.3v and 5v, can use this model for other 3.3v micro controller platforms, such as stm32.

Customers found that getting a arduino analog shield and _arduino_ lambda shield, with this shield made their life much easier.

Why We Like This:

The "i2c" communication interface has been made compatible with arduino uno.
This is compatible with arduino uno.
One of the newcomers and featured product.

Best With Wifi Module: Dfrobot Arduino Analog Shield

Buy on Amazon

Next on the list, we've got yet another shield that manages to win our hearts. It's the Dfrobot Arduino Analog Shield and it's widely considered as one of the most convenient shields you can buy. The dfrobot arduinoanalog shield works for obstacle avoidance, works great and it is good for space saver. The Manufacturer says: We all know the Raspberry pi is a mini-computer running on the Linux operating system. Further, this is superior response time, is rapid and it is designed for high performance.

Above all, the dfrobot arduino analogshield is made for micro usb cable and it is made for quick delivery.

"Pin placement suits every shield and comprehensive code libraries can be found from dfrobot or in arduino playground. " - says, one customer. In conclusion, for most customers, it was just what they wanted.

Why We Like This:

This is a raspberry pi arduino shield which allows raspberry pi to talk to the arduino.
This has an arduino leonardo buid-in and communicates with raspberry pi via serial port.
Delivers what they promise.

Best With Programming Software: Keyestudio Mega Sensor Shield

Buy on Amazon

Keyestudio makes beautiful and great shields with classic and smartly chosen materials. The Keyestudio Mega Sensor Shield comes with digital and analog interfaces in 3pin (g v s), easy to connect the 3pin sensor modules. Please unplug the jumper cap, then connect the 3.3v voltage to the blue terminal vcc(power positive), so all those vcc (5v)pins will be turned into 3.3v, and you can connect 3.3v modules. This board works well for prototyping or certain permanent applications and is a very handy companion to a mega rev3 or compatible board.

The shield comes with a power led and a d13 indicator. Above all, the keyestudio mega sensor shield is compatible with the programming software for arduino.

Almost all buyers found that the shield was in the amazon listing, so there were no major problems there and 2. In addition, a few also found that the shield makes development on the mega a breeze. Moreover, they strongly agree that this board works well for prototyping or certain permanent applications and is a very handy companion to an arduino mega or compatible board. Without any doubt, this product passed the test and had very satisfied buyers eager to share their experience.

Customers also discovered that its wise to buy a arduino analog shield and _arduino_ lambda shield, along with this shield.

Why We Like This:

Manufacturer says: for more products, please access our amazon flagship store.
This sensor shield board really simplifies the circuit and easily connects commonly used sensors.
This comes with a reset button and 2 signal indicators as well.
You can use this keyestudio mega sensor shield.

Best With Header: Booiparts Arduino Analog Shield

Buy on Amazon

The Booiparts Arduino Analog Shield's superior materials make sure that it ages well with use. Each functional module has a buckled port with vcc, GND and output, which has a corresponding port on the sensor shield, connected with a plain 2.54mm dual-female cable. You may start playing early. And, the shield has a pin header and it is professional. When it comes to finding an optimal shield, the booiparts arduino analog shield is definitely your first choice.

Customers discovered that getting a _arduino_ lambda shield and arduino analog shield, with this shield made their life much easier.

Why We Like This:

Lot of satisfied buyers.
One of the newcomers and featured product.