The 10 Best Esp32 Prototype Boards (2022 reviews)

Compared with other boards in this category, the Deyue Esp32 Prototype Board has a design with broader appeal. The deyue esp32 prototype board comes with self-adhesive tape on the back with interlocking parts. Perfect set for your expert prototyping. In addition, it is fun. It is highly recommended and has a very good design.

The board works perfectly, it is suitable for small size and has a perfect design. Above all, the deyue esp32 prototype board is perfectly aligning with the holes.

Most buyers opine that the board will fit on these bread boards. In addition, a few strongly agree that the board is perfect for prototyping connected home projects. Without any doubt, this board passed the test and had very satisfied buyers eager to share their experience.

Customers say that getting a esp32 sensor kit and esp32 hdmi shield, along with board is useful.

Top Customer Quotes:

Package component: 6 x 400 tie-points.
It is great to start breadboarding.
They are easy to snap together to make larger boards.
This is perfectly, connects to each other exactly as expected.

Best For Iot: Melife Esp32 Prototype Board

Buy on Amazon

We know from years of feedback from readers, amazon sellers, and family and friends what most people want in a convenient and appropriate board. The Melife Esp32 Prototype Board is exactly that - it's a simple board that hits all the right notes. The melife esp32 prototype board can conflict with power supplies as well. Make sure this fits by entering your model number. Furthermore, it works fine and it is very happy.

The board is easy to install, stays connected and it works correctly. Also, it makes for a great company and it takes for minor issues. Finally, the melife esp32 prototype board is safe, reliable, and scalable for a variety of applications.

Almost all buyers agree that the board is great for custom gamepads. And, a few say that the board is perfect for ESP projects. Moreover, a few strongly agree that the board is a great, low-cost way to add wifi control to a project. In short, many have used the board for more than a few months without letup, and it shows no sign of giving up.

Customers discovered that getting a esp32 sensor kit, along with board is useful.

Top Customer Quotes:

2 pack 2.4ghz dual mode wifi + bluetooth development board.
This is perfect and is the lowest price at the time of this writing.
This is a “real” full-fledged professional attempt.
Supportthree modes: ap, sta, and ap+sta.

Best With Wifi Module: Hiletgo Esp32 Prototype Board

Buy on Amazon

The features department is where the Hiletgo Esp32 Prototype Board truly manages to shine. The hiletgo esp32 prototype board is very good, comes with a voltage regulator, it is rock solid and has a very good design. Make sure this fits by entering your model number. Furthermore, this is very well, no less, it is compact and has install style.

The board is used for the reset button, It is suitable for Raspberry pi and has an open design. In addition, it is impressive, it needs more and has a hardware design. Finally, the hiletgo esp32 prototype board is very powerful, is for operating system, it has program distribution and has a neat design.

Most buyers quickly discovered that the board is fixed by downloading the drivers for the serial port chip on the module. And, they also found that the board had a built - in usb->uart bridge for programming. In addition, they strongly agree that this board is a near clone of the normal ESP kit. With no doubts, this board passed the test and had very satisfied buyers eager to share their experience.

Customers discovered that getting a esp32 sensor kit, with this board made their life much easier.

Top Customer Quotes:

This has two nearly identical 32.
This is easy to use and way more powerful.
These features are the same from different sources.
Ultra-low power consumption, works perfectly with the arduino ide.

Best With Battery: Gikfun Esp32 Prototype Board

Buy on Amazon

The Gikfun Esp32 Prototype Board is satisfactory and appropriate and fits well with your daily purpose. The gikfun esp32 prototype board as well, is very good, It is highly recommended and has a very good design. This board is especially useful for preserving a prototype or experiment you have just created on a solderless breadboard by soldering all the pieces in place. And, it is due, it makes for nice quality and has a simple design.

The board is widely used for electronic experiments and point-to-point diary soldering projects. And, the boards are a nice price, It is a perfect fit and has a sturdy design. Lastly, the gikfun esp32 prototype board works great and has a professional design.

Most customers agree that the board is easy to mechanically attach the board inside a box. Also, they strongly agree that the board is good for projects that aren’t important enough to design, order and wait for a custom pcb. Moreover, they strongly agree that the board take solder well and has a breadboard type layout. In conclusion, most buyers agree that the board suits them best, and no one questions it.

Few customers bought esp32 sensor kit, along with the board.

Top Customer Quotes:

Gold plated finish prevents oxidation, high quality gold finish for easy soldering.
It is easy to move from a prototype to a hard-wired design.
All holes are through-plated for strength.
This is perfect for transferring prototypes from solderless breadboard.

Best With Reasonable Price: Hiletgo Temperature Sensor

Buy on Amazon

If you want nothing but a board that is reliable, this Hiletgo Temperature Sensor is certainly a wise investment. The hiletgo temperature sensor can come with a power connector, can be bought for good value, It allows for a touch screen and has a perfect design. Make sure this fits by entering your model number. And, it is really great, it is straight forward and has an open design.

The board works well for micro usb port, Move forward, It is built with great assembly quality and has an awesome design. Most importantly, the hiletgo temperature sensor is really nice, is great for value for money, It is good enough and has a clean design.

Most buyers found that the board is used for general serial communication over usb. Moreover, they also found that the board allows top mount for using jumper wires directly, bottom-mount for use in a breadboard, or the flexibility to solder wires directly for a more permanent installation. Moreover, they say that the display is used, how many gpio lines are being driven, etc. In short, the tone of buyers is very positive and we believe that the board suits the purpose.

Customers found that buying a nodemcu prototype board and esp32 sensor kit, along with board is useful.

Top Customer Quotes:

This is a nice little board with a small oled display.
The esp32 oled development board is decent for experimenting and designing esp32 based projects.
This has a built-in display, wifi, and bluetooth.
This comes with the pins already soldered.

Best For Beginner: Alleu Esp32 Prototype Board

Buy on Amazon

We would, of course, be remiss if we didn't mention Alleu Esp32 Prototype Board for regular usage. The alleu esp32prototype board can be found for raspberry pi, It packaged well and has a perfect design. Make sure this fits by entering your model number. And, this is convenient for prototypes and circuit design experiments and other daily projects.

The board works as advertised, it is great at a reasonable price and has a good design. Moreover, the board is made of abs plastic, Each row and column has corresponding letters and numbers, reducing mistake handling. Lastly, the alleu esp32 prototypeboard very well, is great for quality product, It works perfectly and has a modular design.

"They connect together but it would be better if they were sold as a set of four so you can connect them into a large square configuration. " - says, one customer. With no doubts, this product passed the test and had very satisfied buyers eager to share their experience.

Customers say that buying a esp32 sensor kit, along with board is useful.

Why We Like This:

This is easy to stick on a platform, like the arduino prototype shield.
This is easy to insert and it has other programming boards.
✔️the jumper wires are easy to insert into the breadboard.

Best For Translating Solderless Designs: Electrocookie Esp32 Prototype Board

Buy on Amazon

Not everyone likes to purchase boards for their daily usage, but the Electrocookie Esp32 Prototype Board would be an anomoly. The electrocookie esp32 prototype board is great for projects, It is very helpful and has a sturdy design. . Moreover, this is perfect for high quality, It is made with good contacts and has a perfect design.

The board 's quality is excellent, It is made for high quality breadboards and has a great design. Further, it is very sturdy, it is of very high quality and has an excellent design. Most importantly, the electrocookie esp32 prototype board is very good. is lead free, it is compliant and has a nice design.

Most customers opine that the board can be used in a couple of projects with excellent results. Moreover, a few strongly agree that the board features that make it better than the adafruit board imho. Also, they also found that the electrocookie board has 3 large m3 mounting holes like the adafruit board, but it also has 4 smaller m2 holes on each end. Overall, at the price, they believe that they got a steal of a deal with it.

Top Customer Quotes:

Adaptable with a variety of MCU boards. Compatible with arduino nano, esp8266, nodemcu, etc.
Popular large breadboard alignment for versatile prototyping purposes.
Useful in transferring breadboarded prototypes to reliable and permanent circuits.
This is perfect for translating solderless designs to more permanent test boards.

Best With Ardu: Dorhea Esp32 Prototype Board

Buy on Amazon

Next on the list, we've got yet another board that manages to win our hearts. It's the Dorhea Esp32 Prototype Board and it's widely considered as the board that has the most suitable features. The dorhea esp32 prototype board is great for high performance and it can be bought for good value. Make sure this fits by entering your model number. Further, it works perfectly and it is great little.

The board is made worth the money and it is due. Further, this is compatible with the ardu idea ide. Lastly, the dorhea esp32prototype board is safe, reliable, and scalable to a variety of applications, The user can cut off the power of the cpu and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold.

One customer says - "Individual packages are sold in baggies, very nice, get the projects lined up and have them ready and fresh the day you are ready. ". Almost all buyers agree that the board is perfect with arduino ide without an issue.

Why We Like This:

This is easy to develop, supports lwip protocol, freertos, three modes.
Dual core esp-32 development board, 2.4ghz dual mode development board.
This is great for power consumption and it worked perfectly.
This is good for small volumes and it is friendly.

Best With Button: Dongker Esp32 Prototype Board

Buy on Amazon

Best part: Dongker Esp32 Prototype Board costs comparatively little and it is available to ship in 24 hours. The dongker esp32 prototypeboard is funny and it is used for power indicator. Connect module to pc by usb cable. Also, the board works great, makes for solid construction and it can be bought for good value.

Finally, the dongker esp32 prototype board has straightened the pins, is lead free and it has a start button.

Almost all customers quickly discovered that the board is really useful for prototyping when the standard dev kits aren't enough. Moreover, they strongly agree that the board has different drivers than the cp210x. In addition, they strongly agree that this makes the board look cheap and raises some concerns about how long it may last. In conclusion, buyers found this to be one of the best boards for daily purposes.

Customers say that getting a esp32 prototype board, along with board is useful.

Why We Like This:

It uses a ch340 driver chip, cp210x driver software cannot be used.
This has output all gpio ports for user debugging.
This is great for work temperature and it is used for the reset button.

Best With Header: Keeyees Esp32 Prototype Board

Buy on Amazon

Compared with other boards in this category, the Keeyees Esp32 Prototype Board has a convenient design. The keeyees esp32 prototype board is stable, It is made for screw terminals and has a nice design. Make sure this fits by entering your model number. Further, the board is wired on both sides.

The board is perfect for high quality, It has an updated version and has an excellent design. Further, it is designed by keeyees technical team. Finally, the keeyees esp32 prototype board is a double-layer board.

In conclusion, buyers found this to be one of the best boards for daily purposes.

Customers also discovered that its helpful to get a esp32 sensor kit, along with this board.

Why We Like This:

This is suitable for 38pin narrow version esp32 development board without mounting holes, ref asin.
No need to solder parts by yourself, which is very convenient to use.
Just select them according to your purpose.