We consider a fatman crown vic control arm to be a worthy investment in the long run. We are here to help you choose the right one for your needs from all the best available products in market today.

Our review process: Show/Hide

Our Top Picks:

Best Overall: Buy: Ksp Performance Fatman Crown Vic Control Arm READ REVIEW

Best For Rubber Bushings: Buy: Tuningsworld Fatman Crown Vic Control Arm READ REVIEW

Best For Lower Ball Joints: Buy: Amumu Fatman Crown Vic Control Arm READ REVIEW

Best For Cotter Pin: Buy: Detroit Axle Fatman Crown Vic Control Arm READ REVIEW

Best For Highly Precise Engineering: Buy: Moog Fatman Crown Vic Control Arm READ REVIEW

Best For Vehicle Application: Buy: Mid Valley Fatman Crown Vic Control Arm READ REVIEW

Best For Long Life: Buy: Trq Fatman Crown Vic Control Arm READ REVIEW

Best With Product Description: Buy: Astarpro Fatman Crown Vic Control Arm READ REVIEW

Best For Premium Quality: Buy: Scitoo Fatman Crown Vic Control Arm READ REVIEW

Best For Sway Bar: Buy: Brtec Fatman Crown Vic Control Arm READ REVIEW

Best Overall: Ksp Performance Fatman Crown Vic Control Arm

Buy on Amazon

Ksp Performance makes beautiful and great arms with classic and higher-grade materials. The Ksp Performance Fatman Crown Vic Control Arm is perfect for grease fittings, It is for the passenger side and has a tubular design. Zerk is just a decoration, sealed and pre-greased, so do not try to fill in anymore, otherwise you will damage it. Further, this good so far, is perfect for great quality, It is stable and has a good design.

The arm is superior to rubber in many aspects. And, this reduces corrosion and abrasion by allowing new lubricant to flush contaminants. Finally, the ksp performance fatman crown vic control arm is suitable for harsh high and low-temperature environments.

Almost all customers opine that the arm can work on 2010 f150 which instals 2.5" leveling kits. Also, a few strongly agree that the arm will cause problems when your lift height is over 2. And, they strongly agree that the stage 3.0 ksp control arm could only fit the 0 - 2 " lift. Overall, for almost all buyers, it was just what they wanted.

• This will lift max 3" now.
• After a comprehensive upgrade, 2.0 generation improves the angle of the pipe.
• Within one year, you can get the ball joint at half the discount.
• This will work with any lift if you know what your doing.

Best For Rubber Bushings: Tuningsworld Fatman Crown Vic Control Arm

Buy on Amazon

Best part: tuningsworld Fatman Crown vic control arm costs comparatively low and it is available to ship in 24 hours. The Tuningsworld Fatman Crown Vic Control Arm is made of high strength steel and a durable powder-coated finish, prevents rust and corrosion. 2004 with the independent rear suspension * instruction is not included. In addition, it improves rear suspension, handling, predictable response and even prevents premature tire wearing.

The arm is of better quality, is convertible and it fits perfectly. Finally, the tuningsworld fatman crown vic control arm includes prevent rust and corrosion，polyurethane rubber bushings and necessary hardware for installation.

"Much easier to install than bushing kits into your oem control arms. " - says, one customer. To sum up, most customers call the arm suits best, and no one questions it.

• Improved suspension geometry to reduce bump steer 4.
• [Feature]: strong welds and tubular steel construction, withstand up to 400 horsepowers.
• 50x61mm lower control arm bushing size.
• [Feature]: this item will not fit the mustang cobra 1994-2004 with independent rear suspension.

Best For Lower Ball Joints: Amumu Fatman Crown Vic Control Arm

Buy on Amazon

We know from years of feedback from readers, amazon sellers, and family and friends what most people want in a convenient and appropriate arm. The Amumu Fatman Crown Vic Control Arm is exactly that - it's a simple arm that hits all the right notes. The amumu fatman crown vic control arm is very important to check the comparability notes for an exact fit. Please remember that communication can resolve all problems. And, this fits 6-lug / 4wd / 4x4 models only.

Finally, the amumu fatman crown vic control arm is for professional installation and it is great for outer tie rods.

• This fits models with torsion bar suspension only.
• Lot of satisfied buyers.

Best For Cotter Pin: Detroit Axle Fatman Crown Vic Control Arm

Buy on Amazon

We know from years of feedback from readers, amazon sellers, and family and friends what most people want in a convenient and appropriate arm. The Detroit axle fatman crown vic control arm is exactly that - it's a simple arm that hits all the right notes. The detroit axle Fatman crown vic control arm is good for very good parts, It is built with great parts and has a control arm style. Manufacturer says: We are a leading supplier of ride control products to vehicle manufacturers nationwide, That expertise translates to detroit axle's oe. Also, it is built to exceed OEM specification.s.

Most importantly, the Detroit Axle Fatman Crown Vic Control Arm is good for suspension components and it is great for a great price.

"Make sure to use the proper size allen wrench at the top of the ball joint, and tighten the hell out of the nut with the biggest box end wrench you can, then check regularly. " - says, one customer. To sum up, buyers found this to be one of the best arms for daily purposes.

• Undergo impact, wear, and fatigue testing to help ensure quality and durability.
• This is made for very good support and it is fitted like a glove.
• This is manufactured to original equipment standards and provides superior stopping performance.
• Kit includes: 2x front lower control arm and ball joint assembly.

Best For Highly Precise Engineering: Moog Fatman Crown Vic Control Arm

Buy on Amazon

The moog Fatman crown vic control arm's high-end materials make sure that it ages well with use. The moog Fatman crownvic control arm could be something wrong with your control arms. Make sure this fits by entering your model number. The same, every moog controlarm is engineered and manufactured with the same goal in mind — to ensure durability.

Above all, the moog Fatman crown vic control arm is designed to handle severe impacts and repetitive loads through heat-treatment.

Most customers found that the arm is great for rear camber adjustment. Therefore, buyers were eager to recommend it to friends and would-be buyers.

• This is easy to install, it comes with correct fit and has precision design.
• Comprehensive coverage - available for foreign and domestic nameplates.
• This is available for foreigners. It has comprehensive coverage and has a high quality design.
• This is designed to be a direct-fit replacement for easy installation, better ride and serviceability.

Best For Vehicle Application: Mid Valley Fatman Crown Vic Control Arm

Buy on Amazon

Not everyone likes to purchase an arm for their daily usage, but the Mid valley Fatman crown viccontrol arm would be an anomoly. The middle valley fatmancrown vic control arm fits only when using a brake conversion from a late 70s camaro or firebird since the spindle is taller. Make sure this fits by entering your model number. These control arms are a direct bolt in upgrade with no modification required. Above all, the Mid Valley Fatman crown vic control arm.

Most buyers opine that the arm will lower your ride height by about 2. Moreover, they strongly agree that the arm will fit your el camino. Moreover, a few say that the arm is not compatible with the vehicle application provided. In conclusion, many buyers have used the Mid Valley Fatman Crown vic control arm for more than a few months without any issues, and it shows no sign of giving up.

• Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride.
• One of the newcomers and featured product.

Best For Long Life: Trq Fatman Crown Vic Control Arm

Buy on Amazon

Next on the list, we've got yet another arm that manages to win our hearts. It's the Trq Fatman Crown Vic Control Arm and it's widely considered as one of the most convenient arms you can buy. And, this warranty covers the cost of the part only. Manufacturer says: Lifetime warranty this item is backed by our limited lifetime warranty. Above all, the trq fatman crown vic control arm is great for long life and it is for lower control arms.

• One of the newcomers and featured product.
• Delivers what they promise.

Best With Product Description: Astarpro Fatman Crown Vic Control Arm

Buy on Amazon

If you often find yourself confused about convenient and suitable arm, astarpro Fatman crownvic control arm is your end point. The Astarpro Fatman Crown Vic Control Arm has undergone an industry-leading evaluation process to ensure smooth, safe operation. 2X front upper controlarm with ball joint assembly, 2x front lower ball joints, 2x front sway bar links, 2x tie rods inner and outer complete kit. This control arm and ball joint assembly directly replaces the original assembly for specific vehicle applications.

Most importantly, the astarpro fatman crown viccontrol arm is made for rugged duty, comes with friendly customer service and it has tied rod end.

• This includes pre-installed ball joints and bushings, saving time and labor.
• Warranty and support -- limited lifetime warranty and friendly customer service.
• This is built to decrease wear rate and ensure overall strength.
• This is manufactured to strict standards using sturdy, safe materials.

Best For Premium Quality: Scitoo Fatman Crown Vic Control Arm

Buy on Amazon

The Scitoo Fatman Crown Vic Control Arm is capable of outshining several other arms featured in this list in long-lasting features. The scitoo fatmancrown vic control arm is good for the passenger side, is great for the outer tie rod end and it is used for the inner tie rod end. Select your vehicle (year/make/model/trim )in the top left corner of the page to confirm compatibility, or see more compatible vehicles in the description. Also, this is basically a collection of parts that are used to restore, replace, or modify a vehicle's suspension system. suspension auto parts directly replace the original assembly on specific vehicle applications, easy installation and steering alignmenta complete suspension kit typically includes the following parts.

Most importantly, the scitoo fatman crown vic control arm prevents the shaft from twisting when the horizontal heights of the right and left wheels are different, prevents positioning displacement and protects parts during the turning.

Overall, many customers have used the scitoo fatman crown vic control arm for more than a few months without any complaints, and it shows no sign of giving up.

• This has included components and it is used for the driver side.
• Good investment for the long term.

Best For Sway Bar: Brtec Fatman Crown Vic Control Arm

Buy on Amazon

We would, of course, be remiss if we didn't mention Brtec Fatman Crown vic control arm for regular usage. The Brtec Fatman Crown Vic Control Arm fits 4wd / 4x4 models only. Make sure this fits by entering your model number. Further, the arm will not fit vehicles over 8500 gross vehicle weight. Lastly, the brtec Fatman crown vic control arm works for part number and it is constructed with excellent quality.

With no doubts, this arm passed the test and had very satisfied buyers eager to share their experience.

• Interchange part number: k8695; k8722; k8724; es3366t; es3367t; es3369t; es3370t; k8739t; es3368; k8772; k8700.
• Quality warranty: 18-month warranty & best service!.
• Good brand reputation.